|
|
|
|
|
|
|
|
|
|
|
|
|
|
Standard compression sleeve for 1/4 in OD copper tube.
|
Standard compression sleeve and nut for 1/4 in O.D copper tube. Two nuts and two sleeves.
|
Includes slip in, non-threaded overflow pipe, washer, poly drain with 3/4 in male garden hose threads.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Adapts poly tube to brass fittings without using 1/4 in CC sleeve.
|
1/4 in CC x 1/8 in MPT. Use with copper or poly tube on side tapped sill cock or pipe adapter. Includes poly tube adapter.
|
1/2 in MPT overflow pipe with flat sided hex head for easy install and removal. Washer included. Nylon drain with 1/2 in FTP ID and 3/4 in male garden hose threads OD.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Union for 1/4 in OD copper tubes.
|
Provides a one step treatment to inhibit build-up of scale, rust and offensive odor. Conditions cooler pad to reduce air temperature. Contains mild acid and wetting agents, not for potable water.
|
Kit fits 3-way side, 4-way down, 6-way side and 8-way down by using an 8 way down distributor with up to 5 inserts plugs and MEK. Includes distributor head, water distributor adapter, MEK solvent and instructions.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Formed basket, fits all pumps. 8 in L x 6 in W x 3-1/2 in H.
|
20-1/8 in end to bend length. Fits all residential coolers.
|
1/4 in CC x 1/8 MPT straight water shut-off valve. Includes poly tube adapter.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1/4 in CC x 1/8 MPT Angle water shut off valve. Includes poly tube adapter, fits sill cocks and pipe adapter.
|
1/4 in CC x 1/4 in CC straight in line water shut-off valve. Includes poly tube adapters for 1/4 in poly tube.
|
For cooler bearings and some cooler motors with oilable bearings. Lubricate shaft bearings at the start of every season and every 60 days during season. Inhibits rust and oxidation.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
A time release formula that controls unpleasant odors from algae and bacteria in evaporative coolers and neutralizes odor in cooler water to freshen the air. Not for potable (drinkable) water.
|
Premium, heavy-bodied, "one coat" coating. Apply with a brush. Designed to coat and seal evaporative cooler bottom pans, protect against rust and corrosion all season, help deaden sound. Resistant to moisture, non-asbestos and fast drying.
|
Brass inlet, arm and stem. Polypropylene body and float. Noiseless and non-corrosive.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Dial Pillow Block Bearing, Dimensions: 5/8 in Dia, Suitable for: Evaporative Cooler Purge Systems
|
Resistant to UV degradation, use to run water to coolers, not for potable water. Do not use indoors or in attic.
|
Use to run water to cooler. Attaches to copper pipe 3/8 to 1-3/8 in OD. Available with rigid self piercing needle.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Dial Pillow Block Bearing, Dimensions: 3/4 in Dia, Suitable for: Evaporative Cooler Purge Systems
|
Provides a one step treatment to inhibit build-up of scale, rust and offensive odor. Conditions cooler pad to reduce air temperature. Contains mild acid and wetting agents, not for potable water.
|
Dial Pillow Block Bearing, Dimensions: 1 in Dia, Suitable for: Evaporative Cooler Purge Systems
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Dura-Cool, foamed polyester pad. Non-allergenic, odorless, cooler air and won't shed fiber. Color blue.
|
6 position rotary wall switch for two-speed evaporative coolers. Kits include plastic plate, mounting screws and wiring diagram. UL recognized component rotary switch. Rated for 1/3 to 3/4 hp motors.
|
Brass body casting, arm and stem. Stainless steel seat, polypropylene float. Plunger rotates to discourage alkali deposits.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Sill cock garden hose thread fits directly onto existing outdoor faucet. Attach angle needle valve or male compression coupling to side tapped 1/8 in FIP to connect to cooler.
|
B & K Evaporative Cooler Valve, Specifications: 3/4 in FHT Inlet, Brass
|
Resistant to UV degradation, use to run water to coolers, not for potable water. Do not use indoors or in attic.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Dura-Cool, foamed polyester pad. Non-allergenic, odorless, cooler air and won't shed fiber. Color blue.
|
Dial Spider Bearing, Dimensions: 1 in Dia, Suitable for: Evaporative Cooler Purge Systems
|
Heavy duty bronze body, brass plunger, arm and stem, polypropylene float, 2-piece arm with adjustable screw and heavy duty threads tapped for 1/4 in female pipe. For industrial coolers.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Variable pulleys must be opened 2-1/2 to 5 full turns, depending on air resistance or motor will overheat. If motor cycles, open variable pulley until motor stops cycling. If cycling persists when pulley is fully opened, you must use the next size smaller pulley. Always use pulley size recommended by cooler manufacturer.
|
Connects pump hose to water distributor head.
|
Fast drying spray coating. Designed to coat and seal evaporative cooler interior, protect against rust and corrosion all season.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Everything needed to run water to an evaporative cooler. Includes: 1/4 in x 25 ft poly tube, brass sill cock with garden hose thread x 1/8 FPT tapped on side, hose washer, 1/4 cc x 1/8 MPT male union, (2) 1/4 in poly tube adapters and installation instructions. For outdoor use only.
|
Heavy-duty corrosion resistant brass body, brass plunger, arm and stem. Polypropylene float. 2-piece arm with adjustable screw.
|
Dial Blower Pulley, 12 in OD, 3/4 in Dia Bore, Zinc, 1 -Groove, For: Evaporative Cooler Purge Systems
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Molded 3 prong plug and extra-long grounded cord fits Champion cooler mounting bracket. Built-in supplementary pump screen, flame-retardant motor housing and auto-reset thermal overload protection. Corrosion-resistant shaft. Permalube bearings. Built-in barbed elbow. Removable base plate for ease of cleaning. Operates in water reservoirs of 1/2 to 4 in. 120 VAC, 60 Hz, UL classified.
|
For ductless installations and mobile homes. Diffuses air 4 ways or 6 ways with 14 adjustable louvers, made with white colored, high-impact plastic. Will not rust, corrode or stain. For duct openings up to 20 in x 20 in. Grille is 22-1/2 in x 22-1/2 in x 3-1/8 in depth. Easy to install. For all residential cooler models.
|
Molded 3 prong plug and extra-long grounded cord fits Champion cooler mounting bracket. Built-in supplementary pump screen, flame-retardant motor housing and auto-reset thermal overload protection. Corrosion-resistant shaft. Permalube bearings. Built-in barbed elbow. Removable base plate for ease of cleaning. Operates in water reservoirs of 1/2 to 4 in, 120 VAC, 60 Hz, UL classified.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
300 denier x 300 denier polyester fabric with double stitched seams, strong draw rope and heavy-duty brass grommets. Compared to canvas, these covers are stronger, last longer and won't shrink. The water-resistant polyurethane coating prevents water from entering cooler while still allowing water vapor to escape, inhibiting moisture buildup inside cooler. Cover is suitable to all seasons as it protects cooler from rain, snow and UV.
|
300 denier x 300 denier polyester fabric with double stitched seams, strong draw rope and heavy-duty brass grommets. Compared to canvas, these covers are stronger, last longer and won't shrink. The water-resistant polyurethane coating prevents water from entering cooler while still allowing water vapor to escape, inhibiting moisture buildup inside cooler. Cover is suitable to all seasons as it protects cooler from rain, snow and UV.
|
Molded 3 prong plug and extra-long grounded cord fits Champion cooler mounting bracket. Built-in supplementary pump screen, flame-retardant motor housing and auto-reset thermal overload protection. Corrosion-resistant shaft. Permalube bearings. Built-in barbed elbow. Removable base plate for ease of cleaning. Operates in water reservoirs of 1/2 to 4 in 120 VAC, 60 Hz, UL classified.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Has heavy-duty bearings, pumps more water, is more efficient than the offset design and has longer life/warranty period.
|
300 denier x 300 denier polyester fabric with double stitched seams, strong draw rope and heavy-duty brass grommets. Compared to canvas, these covers are stronger, last longer and won't shrink. The water-resistant polyurethane coating prevents water from entering cooler while still allowing water vapor to escape, inhibiting moisture buildup inside cooler. Cover is suitable to all seasons as it protects cooler from rain, snow and UV.
|
300 denier x 300 denier polyester fabric with double stitched seams, strong draw rope and heavy-duty brass grommets. Compared to canvas, these covers are stronger, last longer and won't shrink. The water-resistant polyurethane coating prevents water from entering cooler while still allowing water vapor to escape, inhibiting moisture buildup inside cooler. Cover is suitable to all seasons as it protects cooler from rain, snow and UV.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Interior grille cover for MCP44/WPL44(NP).
|
300 denier x 300 denier polyester fabric with double stitched seams, strong draw rope and heavy-duty brass grommets. Compared to canvas, these covers are stronger, last longer and won't shrink. The water-resistant polyurethane coating prevents water from entering cooler while still allowing water vapor to escape, inhibiting moisture buildup inside cooler. Cover is suitable to all seasons as it protects cooler from rain, snow and UV.
|
300 denier x 300 denier polyester fabric with double stitched seams, strong draw rope and heavy-duty brass grommets. Compared to canvas, these covers are stronger, last longer and won't shrink. The water-resistant polyurethane coating prevents water from entering cooler while still allowing water vapor to escape, inhibiting moisture buildup inside cooler. Cover is suitable to all seasons as it protects cooler from rain, snow and UV.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Has heavy-duty bearings, pumps more water, is more efficient than the offset design and has longer life/warranty period.
|
300 denier x 300 denier polyester fabric with double stitched seams, strong draw rope and heavy-duty brass grommets. Compared to canvas, these covers are stronger, last longer and won't shrink. The water-resistant polyurethane coating prevents water from entering cooler while still allowing water vapor to escape, inhibiting moisture buildup inside cooler. Cover is suitable to all seasons as it protects cooler from rain, snow and UV.
|
Has heavy-duty bearings, pumps more water, is more efficient than the offset design and has longer life/warranty period.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
300 denier x 300 denier polyester fabric with double stitched seams, strong draw rope and heavy-duty brass grommets. Compared to canvas, these covers are stronger, last longer and won't shrink. The water-resistant polyurethane coating prevents water from entering cooler while still allowing water vapor to escape, inhibiting moisture buildup inside cooler. Cover is suitable to all seasons as it protects cooler from rain, snow and UV.
|
300 denier x 300 denier polyester fabric with double stitched seams, strong draw rope and heavy-duty brass grommets. Compared to canvas, these covers are stronger, last longer and won't shrink. The water-resistant polyurethane coating prevents water from entering cooler while still allowing water vapor to escape, inhibiting moisture buildup inside cooler. Cover is suitable to all seasons as it protects cooler from rain, snow and UV.
|
More efficient than paper, non-allergenic, odorless, will not shed fiber.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The open cellular structure of this excelsior allows premier pad to hold more water, this results in more evaporative wicking area per square inch than any other evaporative cooler pad. Delivered up to 7 deg cooler air than paper or synthetic pads.
|
The open cellular structure of this excelsior allows premier pad to hold more water, this results in more evaporative wicking area per square inch than any other evaporative cooler pad. Delivered up to 7 deg cooler air than paper or synthetic pads.
|
High efficiency, high-temperature insulation system. Capable of withstanding temperatures over 300 deg F. Reduces motor failures due to heat aging. Premium moisture-resistant insulation system. Styrenated epoxy coating on rotor prevents rust build-up and extends the life of the motor. 115 V, all copper windings, no base, 56Z frame. Auto-reset thermal overload protection. Great starting switch features. Heavy-duty bronze bearing. Mechanically and electrically approved for evaporative cooler applications. Label and instructions in English and Spanish. UL approved construction.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The open cellular structure of this excelsior allows premier pad to hold more water, this results in more evaporative wicking area per square inch than any other evaporative cooler pad. Delivered up to 7 deg cooler air than paper or synthetic pads.
|
Dial MAXCOOL Aspen Pad, Dimensions: 32 x 40 in
|
The open cellular structure of this excelsior allows premier pad to hold more water, this results in more evaporative wicking area per square inch than any other evaporative cooler pad. Delivered up to 7 deg cooler air than paper or synthetic pads.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Dial MAXCOOL Aspen Pad, Dimensions 24 x 36 in, Bundle, 24
|
High efficiency, high-temperature insulation system. Capable of withstanding temperatures over 300 deg F. Reduces motor failures due to heat aging. Premium moisture-resistant insulation system. Styrenated epoxy coating on rotor prevents rust build-up and extends the life of the motor. 115 V, all copper windings, no base, 56Z frame. Auto-reset thermal overload protection. Great starting switch features. Heavy-duty bronze bearing. Mechanically and electrically approved for evaporative cooler applications. Label and instructions in English and Spanish. UL approved construction.
|
Dial Manufacturing Evaporative Cooler Pad, Aspen Fiber, Dimensions: 24 x 26 in, Package Type: Bundle, Package Quantity: 24
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Dial MAXCOOL Aspen Pad, Dimensions 29 x 29 in, Bundle, 24
|
Cellulose base impregnated with plastic resins and anti-rot agents. 50% heavier than paper, holds more water and lasts longer, with high air velocity and fast wet-out. Energy efficient, durable and easy to install.
|
Dial Manufacturing Evaporative Cooler Pad, Aspen Fiber, Dimensions: 28 x 32 in, Package Type: Bundle, Package Quantity: 24
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
High efficiency, high-temperature insulation system. Capable of withstanding temperatures over 300 deg F. Reduces motor failures due to heat aging. Premium moisture-resistant insulation system. Styrenated epoxy coating on rotor prevents rust build-up and extends the life of the motor. 115 V, all copper windings, no base, 56Z frame. Auto-reset thermal overload protection. Great starting switch features. Heavy-duty bronze bearing. Mechanically and electrically approved for evaporative cooler applications. Label and instructions in English and Spanish. UL approved construction.
|
Dial MAXCOOL Aspen Pad, Dimensions 28 x 34 in, Bundle, 24
|
High efficiency, high-temperature insulation system. Capable of withstanding temperatures over 300 deg F. Reduces motor failures due to heat aging. Premium moisture-resistant insulation system. Styrenated epoxy coating on rotor prevents rust build-up and extends the life of the motor. 115 V, all copper windings, no base, 56Z frame. Auto-reset thermal overload protection. Great starting switch features. Heavy-duty bronze bearing. Mechanically and electrically approved for evaporative cooler applications. Label and instructions in English and Spanish. UL approved construction.
|
|
|
VIEW MAP & PHOTO GALLERY | CALL US: 406-466-3100
