|
|
|
|
|
|
|
|
|
|
|
Standard compression sleeve for 1/4 in OD copper tube.
|
Standard compression sleeve and nut for 1/4 in O.D copper tube. Two nuts and two sleeves.
|
Includes slip in, non-threaded overflow pipe, washer, poly drain with 3/4 in male garden hose threads.
|
|
|
|
|
|
|
|
|
|
|
|
|
Adapts poly tube to brass fittings without using 1/4 in CC sleeve.
|
1/4 in CC x 1/8 in MPT. Use with copper or poly tube on side tapped sill cock or pipe adapter. Includes poly tube adapter.
|
1/2 in MPT overflow pipe with flat sided hex head for easy install and removal. Washer included. Nylon drain with 1/2 in FTP ID and 3/4 in male garden hose threads OD.
|
|
|
|
|
|
|
|
|
|
|
|
|
Union for 1/4 in OD copper tubes.
|
Provides a one step treatment to inhibit build-up of scale, rust and offensive odor. Conditions cooler pad to reduce air temperature. Contains mild acid and wetting agents, not for potable water.
|
Kit fits 3-way side, 4-way down, 6-way side and 8-way down by using an 8 way down distributor with up to 5 inserts plugs and MEK. Includes distributor head, water distributor adapter, MEK solvent and instructions.
|
|
|
|
|
|
|
|
|
|
|
|
|
Formed basket, fits all pumps. 8 in L x 6 in W x 3-1/2 in H.
|
20-1/8 in end to bend length. Fits all residential coolers.
|
1/4 in CC x 1/8 MPT straight water shut-off valve. Includes poly tube adapter.
|
|
|
|
|
|
|
|
|
|
|
|
|
1/4 in CC x 1/8 MPT Angle water shut off valve. Includes poly tube adapter, fits sill cocks and pipe adapter.
|
Brass inlet, arm and stem. Polypropylene body and float. Noiseless and non-corrosive.
|
1/4 in CC x 1/4 in CC straight in line water shut-off valve. Includes poly tube adapters for 1/4 in poly tube.
|
|
|
|
|
|
|
|
|
|
|
|
|
For cooler bearings and some cooler motors with oilable bearings. Lubricate shaft bearings at the start of every season and every 60 days during season. Inhibits rust and oxidation.
|
A time release formula that controls unpleasant odors from algae and bacteria in evaporative coolers and neutralizes odor in cooler water to freshen the air. Not for potable (drinkable) water.
|
Premium, heavy-bodied, "one coat" coating. Apply with a brush. Designed to coat and seal evaporative cooler bottom pans, protect against rust and corrosion all season, help deaden sound. Resistant to moisture, non-asbestos and fast drying.
|
|
|
|
|
|
|
|
|
|
|
|
|
Dial Pillow Block Bearing, Dimensions: 5/8 in Dia, Suitable for: Evaporative Cooler Purge Systems
|
Resistant to UV degradation, use to run water to coolers, not for potable water. Do not use indoors or in attic.
|
Use to run water to cooler. Attaches to copper pipe 3/8 to 1-3/8 in OD. Available with rigid self piercing needle.
|
|
|
|
|
|
|
|
|
|
|
|
|
Dial Pillow Block Bearing, Dimensions: 3/4 in Dia, Suitable for: Evaporative Cooler Purge Systems
|
Provides a one step treatment to inhibit build-up of scale, rust and offensive odor. Conditions cooler pad to reduce air temperature. Contains mild acid and wetting agents, not for potable water.
|
Dial Pillow Block Bearing, Dimensions: 1 in Dia, Suitable for: Evaporative Cooler Purge Systems
|
|
|
|
|
|
|
|
|
|
|
|
|
Includes distributor tubes, distributor head, water distributor adapter, MEK solvent and instructions.
|
Dura-Cool, foamed polyester pad. Non-allergenic, odorless, cooler air and won't shed fiber. Color blue.
|
6 position rotary wall switch for two-speed evaporative coolers. Kits include plastic plate, mounting screws and wiring diagram. UL recognized component rotary switch. Rated for 1/3 to 3/4 hp motors.
|
|
|
|
|
|
|
|
|
|
|
|
|
Brass body casting, arm and stem. Stainless steel seat, polypropylene float. Plunger rotates to discourage alkali deposits.
|
Sill cock garden hose thread fits directly onto existing outdoor faucet. Attach angle needle valve or male compression coupling to side tapped 1/8 in FIP to connect to cooler.
|
B & K Evaporative Cooler Valve, Specifications: 3/4 in FHT Inlet, Brass
|
|
|
|
|
|
|
|
|
|
|
|
|
Works as a sacrificial metal to protect cooler cabinet and parts. Unique anode tray design keeps anode above metal cooler bottom and allows anode to degrade evenly on all sides.
|
Resistant to UV degradation, use to run water to coolers, not for potable water. Do not use indoors or in attic.
|
Variable pulleys must be opened 2-1/2 to 5 full turns, depending on air resistance or motor will overheat. If motor cycles (stops and starts due to over-heating), open variable pulley until motor stops cycling. If cycling persists when pulley is fully opened, you must use the next size smaller pulley. Always use pulley size recommended by cooler manufacturer.
|
|
|
|
|
|
|
|
|
|
|
|
|
Dura-Cool, foamed polyester pad. Non-allergenic, odorless, cooler air and won't shed fiber. Color blue.
|
Dial Spider Bearing, Dimensions: 1 in Dia, Suitable for: Evaporative Cooler Purge Systems
|
Heavy duty bronze body, brass plunger, arm and stem, polypropylene float, 2-piece arm with adjustable screw and heavy duty threads tapped for 1/4 in female pipe. For industrial coolers.
|
|
|
|
|
|
|
|
|
|
|
|
|
Variable pulleys must be opened 2-1/2 to 5 full turns, depending on air resistance or motor will overheat. If motor cycles, open variable pulley until motor stops cycling. If cycling persists when pulley is fully opened, you must use the next size smaller pulley. Always use pulley size recommended by cooler manufacturer.
|
Connects pump hose to water distributor head.
|
Fast drying spray coating. Designed to coat and seal evaporative cooler interior, protect against rust and corrosion all season.
|
|
|
|
|
|
|
|
|
|
|
|
|
Everything needed to install a pump on a new or existing evaporative cooler. Contains: 1/4 in float valve, water distributor adapter, 1/2 in 5 ft vinyl pump hose, pump hose restrictor, round formed basket, 2 hose ring clamps, plastic drain and overflow pipe and installation instructions.
|
Everything needed to run water to an evaporative cooler. Includes: 1/4 in x 25 ft poly tube, brass sill cock with garden hose thread x 1/8 FPT tapped on side, hose washer, 1/4 cc x 1/8 MPT male union, (2) 1/4 in poly tube adapters and installation instructions. For outdoor use only.
|
Heavy-duty corrosion resistant brass body, brass plunger, arm and stem. Polypropylene float. 2-piece arm with adjustable screw.
|
|
|
|
|
|
|
|
|
|
|
|
|
Run water to coolers & humidifiers. Not recommended for refrigeration lines. Do not use for potable (Drinkable) water applications.
|
Dial Blower Pulley, 12 in OD, 3/4 in Dia Bore, Zinc, 1 -Groove, For: Evaporative Cooler Purge Systems
|
Molded 3 prong plug and extra-long grounded cord fits Champion cooler mounting bracket. Built-in supplementary pump screen, flame-retardant motor housing and auto-reset thermal overload protection. Corrosion-resistant shaft. Permalube bearings. Built-in barbed elbow. Removable base plate for ease of cleaning. Operates in water reservoirs of 1/2 to 4 in. 120 VAC, 60 Hz, UL classified.
|
|
|
|
|
|
|
|
|
|
|
|
|
For ductless installations and mobile homes. Diffuses air 4 ways or 6 ways with 14 adjustable louvers, made with white colored, high-impact plastic. Will not rust, corrode or stain. For duct openings up to 20 in x 20 in. Grille is 22-1/2 in x 22-1/2 in x 3-1/8 in depth. Easy to install. For all residential cooler models.
|
Molded 3 prong plug and extra-long grounded cord fits Champion cooler mounting bracket. Built-in supplementary pump screen, flame-retardant motor housing and auto-reset thermal overload protection. Corrosion-resistant shaft. Permalube bearings. Built-in barbed elbow. Removable base plate for ease of cleaning. Operates in water reservoirs of 1/2 to 4 in, 120 VAC, 60 Hz, UL classified.
|
300 denier x 300 denier polyester fabric with double stitched seams, strong draw rope and heavy-duty brass grommets. Compared to canvas, these covers are stronger, last longer and won't shrink. The water-resistant polyurethane coating prevents water from entering cooler while still allowing water vapor to escape, inhibiting moisture buildup inside cooler. Cover is suitable to all seasons as it protects cooler from rain, snow and UV.
|
|
|
|
|
|
|
|
|
|
|
|
|
300 denier x 300 denier polyester fabric with double stitched seams, strong draw rope and heavy-duty brass grommets. Compared to canvas, these covers are stronger, last longer and won't shrink. The water-resistant polyurethane coating prevents water from entering cooler while still allowing water vapor to escape, inhibiting moisture buildup inside cooler. Cover is suitable to all seasons as it protects cooler from rain, snow and UV.
|
Molded 3 prong plug and extra-long grounded cord fits Champion cooler mounting bracket. Built-in supplementary pump screen, flame-retardant motor housing and auto-reset thermal overload protection. Corrosion-resistant shaft. Permalube bearings. Built-in barbed elbow. Removable base plate for ease of cleaning. Operates in water reservoirs of 1/2 to 4 in 120 VAC, 60 Hz, UL classified.
|
Has heavy-duty bearings, pumps more water, is more efficient than the offset design and has longer life/warranty period.
|
|
|
|
|
|
|
|
|
|
|
|
|
300 denier x 300 denier polyester fabric with double stitched seams, strong draw rope and heavy-duty brass grommets. Compared to canvas, these covers are stronger, last longer and won't shrink. The water-resistant polyurethane coating prevents water from entering cooler while still allowing water vapor to escape, inhibiting moisture buildup inside cooler. Cover is suitable to all seasons as it protects cooler from rain, snow and UV.
|
300 denier x 300 denier polyester fabric with double stitched seams, strong draw rope and heavy-duty brass grommets. Compared to canvas, these covers are stronger, last longer and won't shrink. The water-resistant polyurethane coating prevents water from entering cooler while still allowing water vapor to escape, inhibiting moisture buildup inside cooler. Cover is suitable to all seasons as it protects cooler from rain, snow and UV.
|
Interior grille cover for MCP44/WPL44(NP).
|
|
|
|
|
|
|
|
|
|
|
|
|
Manufactured from heavy gauge steel with a durable baked-on epoxy finish. Stainless steel hardware to resists weather damage.
|
300 denier x 300 denier polyester fabric with double stitched seams, strong draw rope and heavy-duty brass grommets. Compared to canvas, these covers are stronger, last longer and won't shrink. The water-resistant polyurethane coating prevents water from entering cooler while still allowing water vapor to escape, inhibiting moisture buildup inside cooler. Cover is suitable to all seasons as it protects cooler from rain, snow and UV.
|
300 denier x 300 denier polyester fabric with double stitched seams, strong draw rope and heavy-duty brass grommets. Compared to canvas, these covers are stronger, last longer and won't shrink. The water-resistant polyurethane coating prevents water from entering cooler while still allowing water vapor to escape, inhibiting moisture buildup inside cooler. Cover is suitable to all seasons as it protects cooler from rain, snow and UV.
|
|
|
|
|
|
|
|
|
|
|
|
|
Has heavy-duty bearings, pumps more water, is more efficient than the offset design and has longer life/warranty period.
|
300 denier x 300 denier polyester fabric with double stitched seams, strong draw rope and heavy-duty brass grommets. Compared to canvas, these covers are stronger, last longer and won't shrink. The water-resistant polyurethane coating prevents water from entering cooler while still allowing water vapor to escape, inhibiting moisture buildup inside cooler. Cover is suitable to all seasons as it protects cooler from rain, snow and UV.
|
Has heavy-duty bearings, pumps more water, is more efficient than the offset design and has longer life/warranty period.
|
|
|
|
|
|
|
|
|
|
|
|
|
The Frost King air conditioner support bracket is a must-have item when installing a window air conditioning unit. The Frost King Air conditioner bracket safely supports AC units.
|
300 denier x 300 denier polyester fabric with double stitched seams, strong draw rope and heavy-duty brass grommets. Compared to canvas, these covers are stronger, last longer and won't shrink. The water-resistant polyurethane coating prevents water from entering cooler while still allowing water vapor to escape, inhibiting moisture buildup inside cooler. Cover is suitable to all seasons as it protects cooler from rain, snow and UV.
|
300 denier x 300 denier polyester fabric with double stitched seams, strong draw rope and heavy-duty brass grommets. Compared to canvas, these covers are stronger, last longer and won't shrink. The water-resistant polyurethane coating prevents water from entering cooler while still allowing water vapor to escape, inhibiting moisture buildup inside cooler. Cover is suitable to all seasons as it protects cooler from rain, snow and UV.
|
|
|
|
|
|
|
|
|
|
|
|
|
Manufactured from heavy gauge steel with a durable baked-on epoxy finish. Stainless steel hardware to resists weather damage.
|
The Frost King air conditioner support bracket is a must-have item when installing a window air conditioning unit. The Frost King Air conditioner bracket safely supports AC units.
|
More efficient than paper, non-allergenic, odorless, will not shed fiber.
|
|
|
|
|
|
|
|
|
|
|
|
|
The open cellular structure of this excelsior allows premier pad to hold more water, this results in more evaporative wicking area per square inch than any other evaporative cooler pad. Delivered up to 7 deg cooler air than paper or synthetic pads.
|
The open cellular structure of this excelsior allows premier pad to hold more water, this results in more evaporative wicking area per square inch than any other evaporative cooler pad. Delivered up to 7 deg cooler air than paper or synthetic pads.
|
The open cellular structure of this excelsior allows premier pad to hold more water, this results in more evaporative wicking area per square inch than any other evaporative cooler pad. Delivered up to 7 deg cooler air than paper or synthetic pads.
|
|
|
|
|
|
|
|
|
|
|
|
|
High efficiency, high-temperature insulation system. Capable of withstanding temperatures over 300 deg F. Reduces motor failures due to heat aging. Premium moisture-resistant insulation system. Styrenated epoxy coating on rotor prevents rust build-up and extends the life of the motor. 115 V, all copper windings, no base, 56Z frame. Auto-reset thermal overload protection. Great starting switch features. Heavy-duty bronze bearing. Mechanically and electrically approved for evaporative cooler applications. Label and instructions in English and Spanish. UL approved construction.
|
The open cellular structure of this excelsior allows premier pad to hold more water, this results in more evaporative wicking area per square inch than any other evaporative cooler pad. Delivered up to 7 deg cooler air than paper or synthetic pads.
|
Dial MAXCOOL Aspen Pad, Dimensions: 32 x 40 in
|
|
|
|
|
|
|
|
|
|
|
|
|
The open cellular structure of this excelsior allows premier pad to hold more water, this results in more evaporative wicking area per square inch than any other evaporative cooler pad. Delivered up to 7 deg cooler air than paper or synthetic pads.
|
Dial MAXCOOL Aspen Pad, Dimensions 24 x 36 in, Bundle, 24
|
Cellulose base impregnated with plastic resins and anti-rot agents. 50% heavier than paper, holds more water and lasts longer, with high air velocity and fast wet-out. Energy efficient, durable and easy to install.
|
|
|
|
|
|
|
|
|
|
|
|
|
High efficiency, high-temperature insulation system. Capable of withstanding temperatures over 300 deg F. Reduces motor failures due to heat aging. Premium moisture-resistant insulation system. Styrenated epoxy coating on rotor prevents rust build-up and extends the life of the motor. 115 V, all copper windings, no base, 56Z frame. Auto-reset thermal overload protection. Great starting switch features. Heavy-duty bronze bearing. Mechanically and electrically approved for evaporative cooler applications. Label and instructions in English and Spanish. UL approved construction.
|
Dial Manufacturing Evaporative Cooler Pad, Aspen Fiber, Dimensions: 24 x 26 in, Package Type: Bundle, Package Quantity: 24
|
Dial MAXCOOL Aspen Pad, Dimensions 29 x 29 in, Bundle, 24
|
|
|
|
|
|
|
|
|
|
|
|
|
Cellulose base impregnated with plastic resins and anti-rot agents. 50% heavier than paper, holds more water and lasts longer, with high air velocity and fast wet-out. Energy efficient, durable and easy to install.
|
Dial Manufacturing Evaporative Cooler Pad, Aspen Fiber, Dimensions: 28 x 32 in, Package Type: Bundle, Package Quantity: 24
|
High efficiency, high-temperature insulation system. Capable of withstanding temperatures over 300 deg F. Reduces motor failures due to heat aging. Premium moisture-resistant insulation system. Styrenated epoxy coating on rotor prevents rust build-up and extends the life of the motor. 115 V, all copper windings, no base, 56Z frame. Auto-reset thermal overload protection. Great starting switch features. Heavy-duty bronze bearing. Mechanically and electrically approved for evaporative cooler applications. Label and instructions in English and Spanish. UL approved construction.
|
|
|
|
|
|
|
|
|
|
|
|
|
Dial MAXCOOL Aspen Pad, Dimensions 28 x 34 in, Bundle, 24
|
Comfort-Aire Air Conditioner, 4 A, 115 V, 60 Hz Frequency, 5000 Btu/hr Cooling, 11.1 EER, 2 Ports/Ways, 2 Speed, 100 to 150 sq-ft Coverage Area, 136 cfm Air Flow, Electro-Mechanical Control, 1.27 pt/hr Humidity Removal, 16 in Width, 15-7/16 in Depth, 12 in Height, Window Unit Mounting, Includes: Window Mounting Kit
|
High efficiency, high-temperature insulation system. Capable of withstanding temperatures over 300 deg F. Reduces motor failures due to heat aging. Premium moisture-resistant insulation system. Styrenated epoxy coating on rotor prevents rust build-up and extends the life of the motor. 115 V, all copper windings, no base, 56Z frame. Auto-reset thermal overload protection. Great starting switch features. Heavy-duty bronze bearing. Mechanically and electrically approved for evaporative cooler applications. Label and instructions in English and Spanish. UL approved construction.
|
|
|
|
|
|
|
|
|
|
|
|
|
Comfort-Aire Heat Controller, 6000 Btu, 150 to 250 sq-ft Coverage Area
|
Comfort-Aire Room Air Conditioner, 5.9 A, 115 V, Frequency Rating: 60 Hz, Cooling Capacity: 8000 Btu/hr, EER Rating: 12, Number of Ports/Ways: 4, 3 Speeds, 300 to 350 sq-ft Coverage Area, Air Flow Rate: 196 cfm, Sound Level: 58/55/53 dB, Control Type: Electronic Digital Touchpad, White, Humidity Removal Capacity: 2.11 pts/hr, 22 in W, 17.72 in D, 15 in H
|
The UltraCool Portable Evaporative Cooler with motor is an environmentally-friendly unit designed to provide portability and energy-efficient performance. The powerful axial fan and 3-speed motor offer optimal cooling while the stylish pedestal design with 4 casters provides maneuverability. Digital controls and a timer offer easy programming. This evaporative cooler performs best in dry, arid climates.
|
|
|
|
|
|
|
|
|
|
|
|
|
Comfort-Aire Window Air Conditioner, 8.78 A, 115 V, Wattage Rating: 720 W, Frequency Rating: 60 Hz, Cooling Capacity: 8000 Btu/hr, EER Rating: 3.3, 3 Speeds, 350 sq-ft Coverage Area, Air Flow Rate: 345 cfm, Sound Level: 58 to 63.5 dBA, Control Type: Electronic, Humidity Removal Capacity: 3.8 pt/hr, 19.17 in W, 21.97 in D, 13.46 in H, Window Mounting, Includes: Window Mounting Kit
|
Cool a room without any ductwork or special wiring - and move the unit from room to room as needed. Our portable units are ideal for any area where temporary cooling or heating is needed or in situations where a window air conditioner isn't an option.
|
Room air units are an economical and practical means of adding comfort to a home, commercial space, warehouse office, or other area. For best results, the air conditioner or room heat pump should be correctly sized for the space. The specifications in this catalog show the approximate square footage which each unit effectively cools. However, other factors should be considered in selecting model size - it would be a good idea to choose the next size up if there are multiple doors and windows in the space, if ceilings are exceptionally high, if heat-generating equipment is used, or if several people occupy the space.
|
|