|
|
|
|
|
|
|
|
|
|
|
|
|
|
The IUS is a hybrid hanger that incorporates the advantages of the face-mount and top-mount hanger. Installation is fast with the Strong-Grip? seat, easy-to-reach face nails and self-jigging locator tabs.
|
The innovative ITS is designed to support 90 deg connections of I-joists to headers. This top-flange hanger features the Strong-Grip? seat and Funnel Flange? design allowing standard joist installation without the use of joist nails, resulting in the lowest installed cost.
|
The patent pending LSSR light slopeable/skewable rafter hanger is the next generation of a field adjustable rafter hangers. One of its key features is that it can be installed after the rafter has been tacked into place. A versatile hanger, it is field adjustable for skews up to 45 deg and features an innovative hinged swivel seat which adjusts up to a 45 deg slope.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
DTT tension ties are safe, cost-effective connectors designed to meet or exceed code requirements for deck construction. These versatile DTT connectors are also load-rated as a hold-down for light-duty shearwalls and braced-wall panel applications.
|
The patent pending LSSR light slopeable/skewable rafter hanger is the next generation of a field adjustable rafter hangers. One of its key features is that it can be installed after the rafter has been tacked into place. A versatile hanger, it is field adjustable for skews up to 45 deg and features an innovative hinged swivel seat which adjusts up to a 45 deg slope.
|
The patent pending LSSR light slopeable/skewable rafter hanger is the next generation of a field adjustable rafter hangers. One of its key features is that it can be installed after the rafter has been tacked into place. A versatile hanger, it is field adjustable for skews up to 45 deg and features an innovative hinged swivel seat which adjusts up to a 45 deg slope.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The standard U hanger provides flexibility of joist to header installation. Versatile fastener selection with tested allowable loads.
|
APLH light hangers connect 2X joists to beams. These concealed-flange hangers feature straight edges and provide a cleaner looking installation for joist connections. Available in a range of sizes, the hangers install easily with the Outdoor Accents? connector screw.
|
APHH heavy hangers connect 4X and 6X beams to girders. These concealed-flange hangers feature straight edges and provide a cleaner looking installation for joist connections. Available in a range of sizes, the hangers install easily to the joist with the Outdoor Accents? structural wood screw and hex head washer and to the header with the Strong-Drive? SDS heavy-duty connector screw.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
All hangers in this series have double-shear nailing. This innovation distributes the load through two points on each joist nail for greater strength. It also allows the use of fewer nails, faster installation and the use of standard nails for all connections.
|
The LU is designed for joist-to-header installation in wood-framed construction. This face-mount hanger features speed prongs to temporarily position and secure the connector for easier and faster installation. The economical LU hanger is value-engineered for strength.
|
The HGUS is an extra-heavy-capacity hanger for applications requiring girder support. This girder hanger features double-shear nailing that distributes the load through two points on each joist nail for greater strength. Value-engineered, the HGUS is designed to carry high-loads for an economical price.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The LU is designed for joist-to-header installation in wood-framed construction. This face-mount hanger features speed prongs to temporarily position and secure the connector for easier and faster installation. The economical LU hanger is value-engineered for strength.
|
The LUC is designed to provide support underneath the joist, rafter or beam to provide a strong connection. This face-mount hanger has concealed header flanges that make for cleaner visible lines in exposed conditions. The LUC is value-engineered for strength and economy and provides for easier and faster installation.
|
The LU is designed for joist-to-header installation in wood-framed construction. This face-mount hanger features speed prongs to temporarily position and secure the connector for easier and faster installation. The economical LU hanger is value-engineered for strength.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The LUS is an easy to install, economical hanger designed for common lumber sizes. This widely used hanger features double-shear nailing that distributes the load through two points on each joist nail for greater strength. This allows for fewer nails, faster installation and the use of all common nails for the same connection.
|
The IUS is a hybrid hanger that incorporates the advantages of the face-mount and top-mount hanger. The Strong-Grip? seat feature allows the I-joist to snap securely into place without the need for joist nails, resulting in a low installed cost. The IUS hanger also features easy-to-reach face nails and self-jigging locator tabs for easier installation.
|
APLH light hangers connect 2X joists to beams. These concealed-flange hangers feature straight edges and provide a cleaner looking installation for joist connections. Available in a range of sizes, the hangers install easily with the Outdoor Accents? connector screw.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The LUS is an easy to install, economical hanger designed for common lumber sizes. This widely used hanger features double-shear nailing that distributes the load through two points on each joist nail for greater strength. This allows for fewer nails, faster installation and the use of all common nails for the same connection.
|
The innovative ITS is designed to support 90 deg connections of I-joists to headers. This top-flange hanger features the Strong-Grip? seat and Funnel Flange? design allowing standard joist installation without the use of joist nails, resulting in the lowest installed cost.
|
The LUS is an easy to install, economical hanger designed for common lumber sizes. This widely used hanger features double-shear nailing that distributes the load through two points on each joist nail for greater strength. This allows for fewer nails, faster installation and the use of all common nails for the same connection.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The LUS is an easy to install, economical hanger designed for common lumber sizes. This widely used hanger features double-shear nailing that distributes the load through two points on each joist nail for greater strength. This allows for fewer nails, faster installation and the use of all common nails for the same connection.
|
The LUC is designed to provide support underneath the joist, rafter or beam to provide a strong connection. This face-mount hanger has concealed header flanges that make for cleaner visible lines in exposed conditions. The LUC is value-engineered for strength and economy and provides for easier and faster installation.
|
The LUS is an easy to install, economical hanger designed for common lumber sizes. This widely used hanger features double-shear nailing that distributes the load through two points on each joist nail for greater strength. This allows for fewer nails, faster installation and the use of all common nails for the same connection.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The LUS is an easy to install, economical hanger designed for common lumber sizes. This widely used hanger features double-shear nailing that distributes the load through two points on each joist nail for greater strength. This allows for fewer nails, faster installation and the use of all common nails for the same connection.
|
The LUS is an easy to install, economical hanger designed for common lumber sizes. This widely used hanger features double-shear nailing that distributes the load through two points on each joist nail for greater strength. This allows for fewer nails, faster installation and the use of all common nails for the same connection.
|
The LUS is an easy to install, economical hanger designed for common lumber sizes. This widely used hanger features double-shear nailing that distributes the load through two points on each joist nail for greater strength. This allows for fewer nails, faster installation and the use of all common nails for the same connection.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The LUS is an easy to install, economical hanger designed for common lumber sizes. This widely used hanger features double-shear nailing that distributes the load through two points on each joist nail for greater strength. This allows for fewer nails, faster installation and the use of all common nails for the same connection.
|
The LU is designed for joist-to-header installation in wood-framed construction. This face-mount hanger features speed prongs to temporarily position and secure the connector for easier and faster installation. The economical LU hanger is value-engineered for strength.
|
The SUR/L are 45 deg skewed hangers designed to support solid sawn and engineered-wood products used in wood construction. These U-shaped hangers encapsulate the top-flange of the joist, so no web stiffeners are required for standard installation.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The SUR/L are 45 deg skewed hangers designed to support solid sawn and engineered-wood products used in wood construction. These U-shaped hangers encapsulate the top-flange of the joist, so no web stiffeners are required for standard installation.
|
DTT tension ties are safe, cost-effective connectors designed to meet or exceed code requirements for deck construction. These versatile DTT connectors are also load-rated as a hold-down for light-duty shearwalls and braced-wall panel applications.
|
The HUS is designed for applications where higher loads are needed. This hanger features double-shear nailing that distributes the load through two points on each joist nail for greater strength. This feature allows for fewer nails, faster installation and the use of all common nails for the same connection.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The innovative ITS is designed to support 90 deg connections of I-joists to headers. This top-flange hanger features the Strong-Grip? seat and Funnel Flange? design allowing standard joist installation without the use of joist nails, resulting in the lowest installed cost.
|
The IUS is a hybrid hanger that incorporates the advantages of the face-mount and top-mount hanger. The Strong-Grip? seat feature allows the I-joist to snap securely into place without the need for joist nails, resulting in a low installed cost. The IUS hanger also features easy-to-reach face nails and self-jigging locator tabs for easier installation.
|
The LUS is an easy to install, economical hanger designed for common lumber sizes. This widely used hanger features double-shear nailing that distributes the load through two points on each joist nail for greater strength. This allows for fewer nails, faster installation and the use of all common nails for the same connection.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The LUS is an easy to install, economical hanger designed for common lumber sizes. This widely used hanger features double-shear nailing that distributes the load through two points on each joist nail for greater strength. This allows for fewer nails, faster installation and the use of all common nails for the same connection.
|
The JB is a top-flange hanger for solid sawn lumber applications. This cost-effective hanger is designed to support light loads. The JB features speed prongs used to temporarily position and secure the connector for fast and easy installation.
|
The innovative ITS is designed to support 90 deg connections of I-joists to headers. This top-flange hanger features the Strong-Grip? seat and Funnel Flange? design allowing standard joist installation without the use of joist nails, resulting in the lowest installed cost.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The LUS is an easy to install, economical hanger designed for common lumber sizes. This widely used hanger features double-shear nailing that distributes the load through two points on each joist nail for greater strength. This allows for fewer nails, faster installation and the use of all common nails for the same connection.
|
The IUS is a hybrid hanger that incorporates the advantages of the face-mount and top-mount hanger. The Strong-Grip? seat feature allows the I-joist to snap securely into place without the need for joist nails, resulting in a low installed cost. The IUS hanger also features easy-to-reach face nails and self-jigging locator tabs for easier installation.
|
The innovative ITS is designed to support 90 deg connections of I-joists to headers. This top-flange hanger features the Strong-Grip? seat and Funnel Flange? design allowing standard joist installation without the use of joist nails, resulting in the lowest installed cost.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The IUS is a hybrid hanger that incorporates the advantages of the face-mount and top-mount hanger. The Strong-Grip? seat feature allows the I-joist to snap securely into place without the need for joist nails, resulting in a low installed cost. The IUS hanger also features easy-to-reach face nails and self-jigging locator tabs for easier installation.
|
The LUS is an easy to install, economical hanger designed for common lumber sizes. This widely used hanger features double-shear nailing that distributes the load through two points on each joist nail for greater strength. This allows for fewer nails, faster installation and the use of all common nails for the same connection.
|
The LUS is an easy to install, economical hanger designed for common lumber sizes. This widely used hanger features double-shear nailing that distributes the load through two points on each joist nail for greater strength. This allows for fewer nails, faster installation and the use of all common nails for the same connection.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The LRUZ offers an economic alternative for those applications requiring a sloped hanger for rafter-to ridge connections. Used with solid sawn rafters, the LRUZ's unique design enables the hanger to be installed either before or after the rafter is in place. The field-adjustable seat helps improve job efficiency by eliminating mismatched angles in the field and lead times associated with special orders. The LRUZ offers comparable or better load capacity to other rafter hangers at a reduced cost while using fewer fasteners.
|
The IUS is a hybrid hanger that incorporates the advantages of the face-mount and top-mount hanger. The Strong-Grip? seat feature allows the I-joist to snap securely into place without the need for joist nails, resulting in a low installed cost. The IUS hanger also features easy-to-reach face nails and self-jigging locator tabs for easier installation.
|
The innovative ITS is designed to support 90 deg connections of I-joists to headers. This top-flange hanger features the Strong-Grip? seat and Funnel Flange? design allowing standard joist installation without the use of joist nails, resulting in the lowest installed cost.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The IUS is a hybrid hanger that incorporates the advantages of the face-mount and top-mount hanger. The Strong-Grip? seat feature allows the I-joist to snap securely into place without the need for joist nails, resulting in a low installed cost. The IUS hanger also features easy-to-reach face nails and self-jigging locator tabs for easier installation.
|
The IUS is a hybrid hanger that incorporates the advantages of the face-mount and top-mount hanger. The Strong-Grip? seat feature allows the I-joist to snap securely into place without the need for joist nails, resulting in a low installed cost. The IUS hanger also features easy-to-reach face nails and self-jigging locator tabs for easier installation.
|
The LUS is an easy to install, economical hanger designed for common lumber sizes. This widely used hanger features double-shear nailing that distributes the load through two points on each joist nail for greater strength. This allows for fewer nails, faster installation and the use of all common nails for the same connection.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The innovative ITS is designed to support 90 deg connections of I-joists to headers. This top-flange hanger features the Strong-Grip? seat and Funnel Flange? design allowing standard joist installation without the use of joist nails, resulting in the lowest installed cost.
|
The innovative ITS is designed to support 90 deg connections of I-joists to headers. This top-flange hanger features the Strong-Grip? seat and Funnel Flange? design allowing standard joist installation without the use of joist nails, resulting in the lowest installed cost.
|
The LUS is an easy to install, economical hanger designed for common lumber sizes. This widely used hanger features double-shear nailing that distributes the load through two points on each joist nail for greater strength. This allows for fewer nails, faster installation and the use of all common nails for the same connection.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The LUS is an easy to install, economical hanger designed for common lumber sizes. This widely used hanger features double-shear nailing that distributes the load through two points on each joist nail for greater strength. This allows for fewer nails, faster installation and the use of all common nails for the same connection.
|
The IUS is a hybrid hanger that incorporates the advantages of the face-mount and top-mount hanger. The Strong-Grip? seat feature allows the I-joist to snap securely into place without the need for joist nails, resulting in a low installed cost. The IUS hanger also features easy-to-reach face nails and self-jigging locator tabs for easier installation.
|
The innovative ITS is designed to support 90 deg connections of I-joists to headers. This top-flange hanger features the Strong-Grip? seat and Funnel Flange? design allowing standard joist installation without the use of joist nails, resulting in the lowest installed cost.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The IUS is a hybrid hanger that incorporates the advantages of the face-mount and top-mount hanger. The Strong-Grip? seat feature allows the I-joist to snap securely into place without the need for joist nails, resulting in a low installed cost. The IUS hanger also features easy-to-reach face nails and self-jigging locator tabs for easier installation.
|
The innovative ITS is designed to support 90 deg connections of I-joists to headers. This top-flange hanger features the Strong-Grip? seat and Funnel Flange? design allowing standard joist installation without the use of joist nails, resulting in the lowest installed cost.
|
The LUS is an easy to install, economical hanger designed for common lumber sizes. This widely used hanger features double-shear nailing that distributes the load through two points on each joist nail for greater strength. This allows for fewer nails, faster installation and the use of all common nails for the same connection.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The SUR/L are 45 deg skewed hangers designed to support solid sawn and engineered-wood products used in wood construction. These U-shaped hangers encapsulate the top-flange of the joist, so no web stiffeners are required for standard installation.
|
For fast, accurate installation of door and window headers and other cross-members. HH header hangers can speed up the job, strengthen the frame and eliminate the need for trimmers.
|
The SUR/L are 45 deg skewed hangers designed to support solid sawn and engineered-wood products used in wood construction. These U-shaped hangers encapsulate the top-flange of the joist, so no web stiffeners are required for standard installation.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The U is designed for joist-to-header installation in wood-framed construction. This face-mount hanger is engineered for strength and provides easy installation. The U hanger is precision-formed and manufactured to the highest quality standards.
|
The LRUZ offers an economic alternative for those applications requiring a sloped hanger for rafter-to ridge connections. Used with solid sawn rafters, the LRUZ's unique design enables the hanger to be installed either before or after the rafter is in place. The field-adjustable seat helps improve job efficiency by eliminating mismatched angles in the field and lead times associated with special orders. The LRUZ offers comparable or better load capacity to other rafter hangers at a reduced cost while using fewer fasteners.
|
The JBA is a top-flange hanger for solid sawn lumber applications. This cost-effective hanger is designed to support light-to-medium loads while providing uplift. The JBA also features optional triangular nail holes for maximum nailing to increase allowable loads.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The HUC is designed for structures requiring additional strength and safety factors. These face-mount joist hangers have concealed header flanges providing cleaner visible lines in exposed conditions. Some models of this heavy-duty hanger can be special ordered with a skewable seat and a seat that slopes as far as up to 45 deg.
|
The LUS is an easy to install, economical hanger designed for common lumber sizes. This widely used hanger features double-shear nailing that distributes the load through two points on each joist nail for greater strength. This allows for fewer nails, faster installation and the use of all common nails for the same connection.
|
The HUS is designed for applications where higher loads are needed. This hanger features double-shear nailing that distributes the load through two points on each joist nail for greater strength. This feature allows for fewer nails, faster installation and the use of all common nails for the same connection.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The HUS is designed for applications where higher loads are needed. This hanger features double-shear nailing that distributes the load through two points on each joist nail for greater strength. This feature allows for fewer nails, faster installation and the use of all common nails for the same connection.
|
The LUS is an easy to install, economical hanger designed for common lumber sizes. This widely used hanger features double-shear nailing that distributes the load through two points on each joist nail for greater strength. This allows for fewer nails, faster installation and the use of all common nails for the same connection.
|
The LRUZ offers an economic alternative for those applications requiring a sloped hanger for rafter-to ridge connections. Used with solid sawn rafters, the LRUZ's unique design enables the hanger to be installed either before or after the rafter is in place. The field-adjustable seat helps improve job efficiency by eliminating mismatched angles in the field and lead times associated with special orders. The LRUZ offers comparable or better load capacity to other rafter hangers at a reduced cost while using fewer fasteners.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The SUR/L are 45 deg skewed hangers designed to support solid sawn and engineered-wood products used in wood construction. These U-shaped hangers encapsulate the top-flange of the joist, so no web stiffeners are required for standard installation.
|
The HUC is designed for structures requiring additional strength and safety factors. These face-mount joist hangers have concealed header flanges providing cleaner visible lines in exposed conditions. Some models of this heavy-duty hanger can be special ordered with a skewable seat and a seat that slopes as far as up to 45 deg.
|
The HUC is designed for structures requiring additional strength and safety factors. These face-mount joist hangers have concealed header flanges providing cleaner visible lines in exposed conditions. Some models of this heavy-duty hanger can be special ordered with a skewable seat and a seat that slopes as far as up to 45 deg.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The JB is a top-flange hanger for solid sawn lumber applications. This cost-effective hanger is designed to support light loads. The JB features speed prongs used to temporarily position and secure the connector for fast and easy installation.
|
The HUS is designed for applications where higher loads are needed. This hanger features double-shear nailing that distributes the load through two points on each joist nail for greater strength. This feature allows for fewer nails, faster installation and the use of all common nails for the same connection.
|
The HU is designed for structures requiring additional strength and safety factors. Some models of this heavy-duty, face-mount hanger can be special ordered with a skewable seat and a seat that slopes as far as up to 45 deg.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The U is designed for joist-to-header installation in wood-framed construction. This face-mount hanger is engineered for strength and provides easy installation. The U hanger is precision-formed and manufactured to the highest quality standards.
|
The HHUS is designed for applications where higher loads are needed. This heavy-capacity hanger features double-shear nailing that distributes the load through two points on each joist nail for greater strength. This feature allows for fewer nails, faster installation and the use of all common nails for the same connection.
|
The U is designed for joist-to-header installation in wood-framed construction. This face-mount hanger is engineered for strength and provides easy installation. The U hanger is precision-formed and manufactured to the highest quality standards.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The HUC is designed for structures requiring additional strength and safety factors. These face-mount joist hangers have concealed header flanges providing cleaner visible lines in exposed conditions. Some models of this heavy-duty hanger can be special ordered with a skewable seat and a seat that slopes as far as up to 45 deg.
|
The U is designed for joist-to-header installation in wood-framed construction. This face-mount hanger is engineered for strength and provides easy installation. The U hanger is precision-formed and manufactured to the highest quality standards.
|
The U is designed for joist-to-header installation in wood-framed construction. This face-mount hanger is engineered for strength and provides easy installation. The U hanger is precision-formed and manufactured to the highest quality standards.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The U is designed for joist-to-header installation in wood-framed construction. This face-mount hanger is engineered for strength and provides easy installation. The U hanger is precision-formed and manufactured to the highest quality standards.
|
The HUC is designed for structures requiring additional strength and safety factors. These face-mount joist hangers have concealed header flanges providing cleaner visible lines in exposed conditions. Some models of this heavy-duty hanger can be special ordered with a skewable seat and a seat that slopes as far as up to 45 deg.
|
The HU is designed for structures requiring additional strength and safety factors. Some models of this heavy-duty, face-mount hanger can be special ordered with a skewable seat and a seat that slopes as far as up to 45 deg.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For fast, accurate installation of door and window headers and other cross-members. HH header hangers can speed up the job, strengthen the frame and eliminate the need for trimmers.
|
The patent-pending LSSR light slopeable/skewable rafter hanger is the next generation of a field-adjustable rafter hangers. One of its key features is that it can be installed after the rafter has been tacked into place. A versatile hanger, it is field-adjustable for skews up to 45 deg and features an innovative hinged swivel seat which adjusts up to a 45 deg slope.
|
The HU is designed for structures requiring additional strength and safety factors. Some models of this heavy-duty, face-mount hanger can be special ordered with a skewable seat and a seat that slopes as far as up to 45 deg.
|
|
|
VIEW MAP & PHOTO GALLERY | CALL US: 406-466-3100
