|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Outdoor Accents? APRTR connects a 2X member to another member in wood construction applications. Manufactured to high-quality standards to ensure solid performance, this Rigid Tie connector features ZMAX? galvanization with a black powder-coat finish for added corrosion resistance. As part of the Outdoor Accents accessories line, this decorative hardware connector can be used with either the Mission Collection? or Avant Collection?, as well as separately to add flair to any outdoor project.
|
The ML angle combines strength and versatility through the use of Strong-Drive? SDS heavy-duty connector screws. Fastener holes are staggered to minimize wood splitting and opposing hole patterns allow for back-to-back installation without fastener interference.
|
The stud plate tie series offers general solutions for connecting the stud to the top and bottom plates. All models can be used to make a connection to either the top or bottom plate and several are suitable for double top plates and studs.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Outdoor Accents? APRTA is designed to connect two wood members at a 90 deg angle. This Rigid Tie angle fastens the members on two sides, eliminating the need for angle bracing. Manufactured to high-quality standards to ensure solid performance, this Rigid Tie connector features ZMAX? galvanization with a black powder-coat finish for added corrosion resistance. As part of the Outdoor Accents accessories line, this decorative hardware connector can be used with either the Mission Collection? or Avant Collection?, as well as separately to add flair to any outdoor project.
|
The Outdoor Accents decorative hardware product line features connectors and fasteners that bring beauty and strength to custom outdoor living structures. The APVST flat strap works for lumber in both nominal and rough sizes. It can be used to connect two beams together or added to any project as a decorative accent. Part of the Avant Collection.
|
Simpson Strong-Tie Skewable Angle, Steel, ZMAX, 3-1/2 in Width, 1-1/4 in Depth, 7-7/8 in Height, 18 ga Material Thickness
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The PSCL is designed to brace unsupported sheathing edges when sheathing meets edge to edge without a rafter for support. This light sheathing clip provides a 1/8 in gap to address shrinkage and expansion of roof sheathing. Inserted over the edges of adjacent plywood panels, the PSCL reduces deflection and keeps panels even to maintain a level plane on the structure.
|
Made from standard tarred roof paper, this impermeable band prevents wood decay. Larger than the simple joist, it diverts water to each side. Offers maximum protection for your deck. Do not waste anymore energy or time cutting bands from a large roll of 48 in (for the roof). This band is installed in a wink - just unroll it on the roof structure and staple it.
|
The PSCA is designed to brace unsupported sheathing edges when sheathing meets edge to edge without a rafter for support. This light sheathing clip provides a 1/8 in gap to address shrinkage and expansion of roof sheathing. Inserted over the edges of adjacent plywood panels, the PSCA reduces deflection and keeps panels even to maintain a level plane on the structure.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The PSCA is designed to brace unsupported sheathing edges when sheathing meets edge to edge without a rafter for support. This light sheathing clip provides a 1/8 in gap to address shrinkage and expansion of roof sheathing. Inserted over the edges of adjacent plywood panels, the PSCA reduces deflection and keeps panels even to maintain a level plane on the structure.
|
Specially scored waxed screws. Scored head breaks off at the same place every time. Carded.
|
Secures batt-type insulation in place between joists. Chisel cut ends dig into joists for permanent holding. Easy to install in hard-to-reach crawl spaces. Pushes into place. Overall length is 1/2 in less than over center joist spacing. 13 ga.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Tamlyn PCS Framing Plywood Clip, Steel, Galvanized, Material Thickness: 20 ga, Maximum Roof Span: 24 in, Number of PC per Spans: 1
|
Made from standard tarred roof paper, this impermeable band prevents wood decay. Larger than the simple joist, it diverts water to each side. Offers maximum protection for your deck. Do not waste anymore energy or time cutting bands from a large roll of 48 in (for the roof). This band is installed in a wink - just unroll it on the roof structure and staple it.
|
Designed for 4 x 4 in posts, our yard and lawn post spike is the easiest way of completing your next outdoor project. With no digging or concrete required, it's as easy to install as it is versatile.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Pylex Ground Ecospike, Square, Black, Suitable for: 4 x 4 in Square Post
|
Replace wood blocking on roof sheathing. Tight fit for positive installation. Embossed dimples provide 1/8 in gap needed to prevent panels from popping up as sheathing expands. G60 galvanizing finish. 20 ga, Boxed.
|
Tamlyn Framing Plywood Clip, Steel, Galvanized, Material Thickness: 20 ga, Maximum Roof Span: 32, Number of PC per Spans: 1
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Simpson Strong-Tie? Outdoor Accents? line of decorative hardware features connectors and fasteners that bring beauty and strength to custom outdoor living structures. The Avant Collection features straighter edges for a clean, timeless design. These decorative side plates attach to the bottom of a post or column to provide a finished look to an installed post-base. They are ideal for projects such as pergolas, patio covers and other top-supported structures.
|
The Simpson Strong-Tie? Outdoor Accents? line of decorative hardware features connectors and fasteners that bring beauty and strength to custom outdoor living structures. The Avant Collection features straighter edges for a clean, timeless design. These decorative side plates attach to the bottom of a post or column to provide a finished look to an installed post-base. They are ideal for projects such as pergolas, patio covers and other top-supported structures.
|
Two-axis adjustable steel post designed to support light work, fence (??60 in), post office box, light sign. An efficient and economical solution that does not require digging or pouring concrete. No more tedious tasks. Easy to install, drive it into the ground (even uneven) using a 4 x 4 in block. The anchoring fins and hooks anchor it securely. Two-axis adjustment system allows the post to be leveled. Use with 4 x 4 in square posts. Is coated with baked powder paint providing excellent rust resistance. Provides long term protection because the wood post is off the ground.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Simpson Strong-Tie panel sheathing clips are used to brace unsupported sheathing edges and provide a 1/8 in gap to address shrinkage and expansion of roof sheathing.
|
The PSCL is designed to brace unsupported sheathing edges when sheathing meets edge to edge without a rafter for support. This light sheathing clip provides a 1/8 in gap to address shrinkage and expansion of roof sheathing. Inserted over the edges of adjacent plywood panels, the PSCL reduces deflection and keeps panels even to maintain a level plane on the structure.
|
The STHD is an embedded strap-tie holdown offering high-loads in both wood and cold-formed steel construction. When installed on the forms with the StrapMate? strap holder or other holding device, the unique design of this cast-in-place strap-tie holdown delivers enhanced stability before and during the pour to help prevent both parallel and perpendicular movement. This results in accurate positioning of the strap and reduced possibility of spalling.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Secures batt-type insulation in place between joists. Chisel cut ends dig into joists for permanent holding. Easy to install in hard-to-reach crawl spaces. Pushes into place. Overall length is 1/2 in less than over center joist spacing. 13 ga.
|
The PSCL is designed to brace unsupported sheathing edges when sheathing meets edge to edge without a rafter for support. This light sheathing clip provides a 1/8 in gap to address shrinkage and expansion of roof sheathing. Inserted over the edges of adjacent plywood panels, the PSCL reduces deflection and keeps panels even to maintain a level plane on the structure.
|
The Squeek No More kit is designed to stop floor squeaks from above the floor by going safely through the carpet. The kit works on all carpets even berber. The Squeek No More kit has 50 screws that are scored one inch from the head and coated with a special wax that allows the screw to safely pass through the carpet. The tooling, a tripod fixture and driver bit, drives the screw safely through the carpet stopping the score on the screw slightly below the wood of the floor. Then with the tripod fixture you snap the head of the screw off. The screw thread then holds the floor to the joist without having any part of the screw sticking up that you could walk on. The kit also includes 2 joist finding tools. You use these to quickly and accurately find the joist from above the floor.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The WBSK workbench and shelving hardware kit provides the connectors and connector fasteners to build a workbench or shelving unit. The kit features the Simpson Strong-Tie? Rigid Tie? RTC2Z corner connector that makes it easier to make strong and durable corner connections with 2 x 4 lumber using no angle cuts or bolts. Each kit contains enough RTC2Z connectors to construct one workbench. Two kits are necessary to build a four-shelf unit. With the WBSK kit, a professional quality project can be customized and completed in a couple of hours.
|
The PSCL is designed to brace unsupported sheathing edges when sheathing meets edge to edge without a rafter for support. This light sheathing clip provides a 1/8 in gap to address shrinkage and expansion of roof sheathing. Inserted over the edges of adjacent plywood panels, the PSCL reduces deflection and keeps panels even to maintain a level plane on the structure.
|
The E-Z Spike is part of a Simpson Strong-Tie? line of products designed to help make reinforcing fence posts simple and economical. The E-Z product line offers solutions for a variety of fence post projects. This post-base allows for easy installation of 4 x 4 wood posts without digging holes or pouring concrete.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The STHD is an embedded strap-tie holdown offering high-loads in both wood and cold-formed steel construction. When installed on the forms with the StrapMate? strap holder or other holding device, the unique design of this cast-in-place strap-tie holdown delivers enhanced stability before and during the pour to help prevent both parallel and perpendicular movement. This results in accurate positioning of the strap and reduced possibility of spalling.
|
This spike, designed to support a patio, shed or deck, is easier to install and more economical than a concrete bearing block. Its adjustable head facilitates the leveling of the floor during construction. Ideal for rough or steep terrain. Its stabilizing anchor-hooks make it return to its initial position after ground movements (freezing, thawing). Its steel structure provides high durability.
|
The simplest and most efficient way to support a patio, tool shed or deck without needing to dig or pour concrete. Quick installation with a lever. Adjust the head to facilitate installation or add an extension to insert it deeper.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Add a bench to a patio, balcony or quay so as to improve outside areas. It fits with all styles of terraces. Only model that uses 5 in of floor space, it provides an extra storage space below the bench. Its steel, welded in one piece and baked powder coating structure, provides durability and stability. Installing a bench is as easy as pie - easy assembly and no cutting necessary.
|
The PSCL is designed to brace unsupported sheathing edges when sheathing meets edge to edge without a rafter for support. This light sheathing clip provides a 1/8 in gap to address shrinkage and expansion of roof sheathing. Inserted over the edges of adjacent plywood panels, the PSCL reduces deflection and keeps panels even to maintain a level plane on the structure.
|
The simplest and most efficient way to support a patio, tool shed or deck without needing to dig or pour concrete. No more endless and complicated tasks! Quick installation, with a lever, just screw the Pylex screw into the ground. Its steel structure, with a baked powder coating finish and its spiral disk ensure stability. This modern technology can be used in all types of terrain and resists ground movements (freezing, thawing).
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
You determine the size. Connect with railing brackets with 2x4 and 2x6 lumber to easily add a bench to any size or shape deck. Gain increased seating area while using only 7 in of deck space. Assembled unit stands 36 in H for deck railing, seat is 17 in H. Quick and easy to assemble using basic tools. Includes bench bracket, hardware and instructions. Lumber not included.
|
APLH light hangers connect 2X joists to beams. These concealed-flange hangers feature straight edges and provide a cleaner looking installation for joist connections. Available in a range of sizes, the hangers install easily with the Outdoor Accents? connector screw.
|
The ML-angle combines strength and versatility through the use of Strong-Drive? SDS heavy-duty connector screws. Fastener holes are staggered to minimize wood splitting and opposing hole patterns allow for back-to-back installation without fastener interference.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The LSTA is designed to resist tension loads in wood-to-wood applications. This light strap-tie utilizes a staggered nail pattern to help minimize wood splitting. The LSTA is designed for use on the edge of 2X members.
|
The LSTA is designed to resist tension loads in wood-to-wood applications. This light strap-tie utilizes a staggered nail pattern to help minimize wood splitting. The LSTA is designed for use on the edge of 2X members.
|
The ML-angle combines strength and versatility through the use of Strong-Drive? SDS heavy-duty connector screws. Fastener holes are staggered to minimize wood splitting and opposing hole patterns allow for back-to-back installation without fastener interference.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Secures batt-type insulation in place between joists. Chisel cut ends dig into joists for permanent holding. Easy to install in hard-to-reach crawl spaces. Pushes into place. Overall length is 1/2 in less than over center joist spacing. 13 ga.
|
The RTF is designed to connect two horizontal 2X members to a vertical 2 x 4 in wood applications. Manufactured to high-quality standards to ensure solid performance, this flat rigid tie connector features a galvanized finish for added corrosion resistance.
|
APHH heavy hangers connect 4X and 6X beams to girders. These concealed-flange hangers feature straight edges and provide a cleaner looking installation for joist connections. Available in a range of sizes, the hangers install easily to the joist with the Outdoor Accents? structural wood screw and hex head washer and to the header with the Strong-Drive? SDS heavy-duty connector screw.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The ML-angle combines strength and versatility through the use of Strong-Drive? SDS heavy-duty connector screws. Fastener holes are staggered to minimize wood splitting and opposing hole patterns allow for back-to-back installation without fastener interference.
|
The simplest and most efficient way to support a fence (<60 in), sign, letter box without needing to dig or pour concrete. No more endless tasks! Quick installation, with a lever, just screw the Pylex-L in the ground. Its steel structure, blades and spiral disk ensure stability. This modern technology can be used in all types of terrain and resists ground movements (freezing, thawing).
|
The RTB is designed for connecting intersecting 2X members in wood construction applications. Manufactured to high-quality standards to ensure solid performance, this rigid tie features a G90 galvanized finish for added corrosion resistance and requires the use of hot-dip galvanized fasteners. The versatile RTB is ideal for building lattice, railings and shelving.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Outdoor Accents? angles tie together beams, rafters and more. The APVA angle makes structural connections between beams and posts more visually appealing. These 90 deg angles make connections stronger and provide consistent, straight corners for a variety of outdoor projects. Part of the Avant collection.
|
The T is designed for beam-to-column applications. This versatile utility strap is T-shaped, making it ideal for transferring tension loads in a variety of applications. The T features well-placed fastener holes and can easily be installed with nails or bolts.
|
The L is designed for beam-to-column applications. This versatile utility strap is L-shaped, making it ideal for transferring tension loads in a variety of applications. The L features well-placed fastener holes and can easily be installed with nails or bolts.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
You can determine the size and configuration, just add 2x4's to the ShelfLinks to make functional and custom shelving in any length, height and configuration. Made of structural resin. Can support spans up to 8 ft. Includes ShelfLinks, hardware and instructions. Lumber not included.
|
The LU is designed for joist-to-header installation in wood-framed construction. This face-mount hanger features speed prongs to temporarily position and secure the connector for easier and faster installation. The economical LU hanger is value-engineered for strength.
|
Commercial steel post designed to support heavy-duty work, fences (<84 in), post boxes, signs. A solution which is fast, efficient and economical, which does not require digging or pouring concrete. Easy to install, drive in the ground using a drive block and attach a square post to it. Its blades anchor it solidly. It does not require maintenance due to its baked powder coating finish.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The HTP is designed to resist tension when installed on the side of 2 x 4 or larger members. This heavy tie plate is ideal for a variety of applications including connecting two members end-to-end or attaching multiple members together. The HTP can be installed with either nails or Strong-Drive? SD connector screws.
|
The FB is designed for connecting fence rails to posts. The simple design of this fence rail bracket provides strong connections without the need for toe nails or screws. The versatility of the FB makes planning and building fences, deck/porch railings and louvers fast and easy.
|
Outdoor Accents? angles tie together beams, rafters and more. The APA angle makes structural connections between beams and posts much more visually appealing. These angles make connections stronger and provide consistent, straight corners for a variety of outdoor projects.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The A34 is a framing angle designed for making a variety of connections. The angle is secured with nails or SD screws and features a speed prong to temporarily hold the connector in place during fastening. The economical A34 provides easy and fast installation.
|
The H2.5A single-sided hurricane tie is designed to resist moderate loads at the rafter/truss to-top-plate connection. As part of a continuous load path, the H2.5A resists both lateral and uplift loads. The symmetrical design eliminates the need for separate right and left parts.
|
The H2.5T single-sided hurricane tie is designed to resist moderate loads at the rafter/truss to-top-plate connection. As part of a continuous load path, the H2.5T resists both lateral and uplift loads. H2.5T ties are available in left and right-hand models and can be installed in pairs.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The LU is designed for joist-to-header installation in wood-framed construction. This face-mount hanger features speed prongs to temporarily position and secure the connector for easier and faster installation. The economical LU hanger is value-engineered for strength.
|
The LUC is designed to provide support underneath the joist, rafter or beam to provide a strong connection. This face-mount hanger has concealed header flanges that make for cleaner visible lines in exposed conditions. The LUC is value-engineered for strength and economy and provides for easier and faster installation.
|
The MST is designed to resist tension loads in floor-to-floor and other applications. This high-capacity strap features a dense nailing pattern and can be installed with either nails or bolts. The MST is a load-rated, precut strap designed for quick installation and optimal performance. It is suitable for connecting double 2X members or greater.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The LSTA is designed to resist tension loads in wood-to-wood applications. This light strap-tie utilizes a staggered nail pattern to help minimize wood splitting. The LSTA is designed for use on the edge of 2X members.
|
The Simpson Strong-Tie? Outdoor Accents? line of decorative hardware features connectors and fasteners that bring beauty and strength to custom outdoor living structures. The APDPC decorative post cap is an Outdoor Accents? accessory that provides moisture protection and a decorative appearance to wooden post tops. The black textured composite material has UV protection. Available in sizes for nominal 4 x 4 and 6 x 6 wood posts.
|
The LU is designed for joist-to-header installation in wood-framed construction. This face-mount hanger features speed prongs to temporarily position and secure the connector for easier and faster installation. The economical LU hanger is value-engineered for strength.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The RTU is designed for connecting intersecting members in wood construction applications. Manufactured to high-quality standards to ensure solid performance, this U-shaped rigid tie features a G90 galvanized finish for added corrosion resistance. The versatile RTU is ideal for a variety of projects including fences, railings and utility furniture or any application where a 2X member crosses another.
|
Brick ties provide a connection between the wood structure and brick veneer. The new, high-performance BTH? brick tie is a tested solution for connecting masonry veneer to wood structures across airspaces from 2 to 3 in, providing the flexibility needed to meet the veneer spacing requirements. The new BTH design adds strength and versatility, making this tie the ideal solution for varied jobsite conditions. It's field-adjustable in two places and can be installed with either side facing up. Use existing Simpson Strong-Tie? brick ties, BTB and BT, for 1 in prescriptive code airspace requirement or at a closer spacing for airspaces from 1 to 2 in.
|
The L is designed for beam-to-column applications. This versatile utility strap is L-shaped, making it ideal for transferring tension loads in a variety of applications. The L features well-placed fastener holes and can easily be installed with nails or bolts.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The HRS is designed to resist tension forces between two wood members. The HRS6, HRS8 and HRS12 can be installed on the edge of 2X members. These straps are load-rated, precut straps designed for quick installation and optimal performance. The HRS installs where top or bottom plates are cut, at wall intersections and as ridge ties.
|
The ST is designed to resist tension loads in a variety of applications. This economical strap-tie is ideal for installation where top or bottom plates are cut, at wall intersections and as ridge ties. The ST is a load-rated, precut strap designed for quick installation and optimal performance.
|
Outdoor Accents? flat L-straps from Simpson Strong-Tie? bring decorative appeal and lateral strength to any outdoor living space. They provide reinforcement for a connection where one lumber piece intersects another at a 90 deg angle. This L-strap is easily installed with Outdoor Accents? structural screws and hex head washers. Part of the Avant Collection.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The LUS is an easy to install, economical hanger designed for common lumber sizes. This widely used hanger features double-shear nailing that distributes the load through two points on each joist nail for greater strength. This allows for fewer nails, faster installation and the use of all common nails for the same connection.
|
The LSC adjustable stair-stringer connector offers a versatile, concealed connection between the stair-stringer and the carrying header or rim board while replacing costly framing. Field slopeable to all common stair-stringer pitches, the LSC connector is suitable for either solid or notched stringers.
|
The HRS is designed to resist tension forces between two wood members. The HRS6, HRS8 and HRS12 can be installed on the edge of 2X members. These straps are load-rated, precut straps designed for quick installation and optimal performance. The HRS installs where top or bottom plates are cut, at wall intersections and as ridge ties.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The IUS is a hybrid hanger that incorporates the advantages of the face-mount and top-mount hanger. The Strong-Grip? seat feature allows the I-joist to snap securely into place without the need for joist nails, resulting in a low installed cost. The IUS hanger also features easy-to-reach face nails and self-jigging locator tabs for easier installation.
|
The RPBZ retrofit post-base is designed to reinforce existing posts and columns. The single, versatile model will fit on any size post consisting of a double 2 x 4 or larger. RPBZ can also be used to reinforce new post-base connections such as braced carports, patio covers, decks and other structures. The RPBZ can be installed with the CPS composite plastic stand-off to meet a 1 in post stand-off code requirement. A single RPBZ can be installed on a post that is flush to a corner and two RPBZs can be installed at away from edge conditions to fortify the post-base connection to resist both wind and seismic forces. Strong-Drive? SDS heavy-duty connector screws install easily and provide excellent holding strength for post to flange connections. Additionally, the RPBZ can be purposed as a temporary base fixture for posts when shoring beams. RPBZ comes standard in ZMAX? finish to meet exposure conditions in many environments.
|
APLH light hangers connect 2X joists to beams. These concealed-flange hangers feature straight edges and provide a cleaner looking installation for joist connections. Available in a range of sizes, the hangers install easily with the Outdoor Accents? connector screw.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The A35 is a balanced and completely reversible framing angle designed for making a variety of connections. The angle's exclusive bend slot allows instant and accurate field bends for all two and three-way ties. The A35 is secured with nails and features a speed prong to temporarily hold the connector in place for easy and fast installation.
|
The LUS is an easy to install, economical hanger designed for common lumber sizes. This widely used hanger features double-shear nailing that distributes the load through two points on each joist nail for greater strength. This allows for fewer nails, faster installation and the use of all common nails for the same connection.
|
The innovative ITS is designed to support 90 deg connections of I-joists to headers. This top-flange hanger features the Strong-Grip? seat and Funnel Flange? design allowing standard joist installation without the use of joist nails, resulting in the lowest installed cost.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Make a comfortable, sturdy bench and a table up to 8 ft long. Just add 2x4 lumber pieces. Flips and locks from a bench to a table in seconds without using tools. Slide lock safely secures and locks in position. Made of maintenance-free structural resin. Use only one or slide two Bench Tables together for a full size picnic table. Good for small porches and decks. Assembled unit stands 34 in H in the bench position, 31 in H in the table position and both with 17-1/2 in H seat. Includes Bench Table legs, hardware and instructions. Lumber not included.
|
An interlock provides alignment control and correct nailing locations. For a rafter-to-face connector, flatten the top-flange into the face plane. The RR may be used with rafters sloped up to 30 deg.
|
Our line of angles provides a way to make a wide range of 90 deg connections.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The PBS post-base provides a connection between a post (or column) for decks, patio covers and other top-supported structures. By featuring a 1 in stand-off height, it reduces the potential for decay at post and column ends.
|
The RTC is a uniquely designed rigid tie connector that connects two horizontal members at a corner to a vertical wood member. Manufactured to high-quality standards to ensure solid performance, this corner rigid tie connector features a galvanized finish for added corrosion resistance.
|
Our line of angles provides a way to make a wide range of 90 deg connections.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The ST is designed to resist tension loads in a variety of applications. This economical strap-tie is ideal for installation where top or bottom plates are cut, at wall intersections and as ridge ties. The ST is a load-rated, precut strap designed for quick installation and optimal performance.
|
The LUS is an easy to install, economical hanger designed for common lumber sizes. This widely used hanger features double-shear nailing that distributes the load through two points on each joist nail for greater strength. This allows for fewer nails, faster installation and the use of all common nails for the same connection.
|
The GA angle is a small, versatile angle designed to improve corner stability. The engineered and tested gusset in the angle increases strength for lateral and uplift loads. The GA installs easily with nails, or for increased loads, with Strong-Drive? SD Connector screws.
|
|
|
VIEW MAP & PHOTO GALLERY | CALL US: 406-466-3100
