Home > POWER TOOLS & ACC > POWER TOOL ACCESSORIES > POWER CUTTING ACCESSORIES > ROUTER BITS 1/2 IN CARBIDE
Sort By:
Page of 1
BIT ROUTER PILOT PANEL 3/8X1IN Freud 12-116 Router Bit Freud 12-118 Router Bit
Bosch carbide-tipped router bits deliver precision and durability. They feature premium-quality micro grain carbide tips that are engineered with a special heat treating process for an extra-fine finish. The tips provide maximum sharpness and edge retention. The fully hardened and tempered steel shanks provide ultimate durability. These bits retain painstaking accuracy across hundreds of profiles for mortising, edge forming, trimming, surface forming and cabinetry/joinery in wood, plastic and laminate. Cuts all composition materials, plywood, hardwood and soft wood. Use on CNC and other automatic routers as well as handheld and table-mounted portable routers. Cuts all composition materials, plywood, hardwood and soft wood. Use on CNC and other automatic routers as well as handheld and table-mounted portable routers.
BIT ROUTER STRGT 3/4X1-1/4IN Freud 12-110 Router Bit Freud 12-122 Router Bit
Bosch carbide-tipped router bits deliver precision and durability. They feature premium-quality micro grain carbide tips that are engineered with a special heat treating process for an extra-fine finish. The tips provide maximum sharpness and edge retention. The fully hardened and tempered steel shanks provide ultimate durability. These bits retain painstaking accuracy across hundreds of profiles for mortising, edge forming, trimming, surface forming and cabinetry/joinery in wood, plastic and laminate. Cuts all composition materials, plywood, hardwood and soft wood. Use on CNC and other automatic routers as well as handheld and table-mounted portable routers. Cuts all composition materials, plywood, hardwood and soft wood. Use on CNC and other automatic routers as well as handheld and table-mounted portable routers.
Freud 12-100 Router Bit STRAIGHT BIT DBL FLUTE 1/2X2IN BEARING FLUSH TRIM RTR BIT 3/4
Cuts all composition materials, plywood, hardwood and soft wood. Use on CNC and other automatic routers as well as handheld and table-mounted portable routers. Freud's huge selection of carbide tipped and solid carbide double flute straight bits are ideal for grooving, edge routing and other general-purpose routing tasks. Tips are relieved to allow for efficient plunge cuts.
Freud 50-104 Flush Trim Router Bit Freud 12-136 Router Bit Freud 42-114 Flush Trim Router Bit
Top mounted bearings on bits make them ideal for lettering or other template work where the work piece is being grooved or routed out. Cuts all composition materials, plywood, hardwood and soft wood. Use on portable or table mounted routers for template work. Cuts all composition materials, plywood, hardwood and soft wood.  Use on CNC and other automatic routers as well as hand held and table mounted portable routers. These are the bits to rely on for a smooth, burn-free cut. Two flutes provide faster cutting and three flutes yield a excellent finish.
Freud 12-156 Router Bit Freud 12-172 Router Bit Freud 26-104 Router Bit
Cuts all composition materials, plywood, hardwood and soft wood. Use on CNC and other automatic routers as well as handheld and table-mounted portable routers. Cuts all composition materials, plywood, hardwood and soft wood. Use on CNC and other automatic routers as well as handheld and table-mounted portable routers. Drill through point allows self starting, while the pilot will act as a guide for template work. Cuts all composition materials, plywood, hardwood and softwood. Use on portable routers for template work.
Freud 28-104 Router Bit Freud 12-150 Router Bit Freud 42-116 Flush Trim Router Bit
Drill through point allows self starting, while the pilot will act as a guide for template work. Cuts all composition materials, plywood, hardwood and softwood. Use on portable routers for template work. Cuts all composition materials, plywood, hardwood and soft wood. Use on CNC and other automatic routers as well as handheld and table-mounted portable routers. These are the bits to rely on for a smooth, burn-free cut. Two flutes provide faster cutting and three flutes yield a excellent finish.
Freud 12-130 Router Bit Freud 32-102 Rabbeting Router Bit STRAIGHT ROUTER BIT 2F 3/4IN
Cuts all composition materials, plywood, hardwood and soft wood. Use on CNC and other automatic routers as well as handheld and table-mounted portable routers. Freud Router Bit, 1-1/4 in Diameter Cutter, 2 -Cutter, 1/2 in Cutting Depth, 1/2 in Shank Diameter, Carbide, 2-1/4 in Overall Length, Applicable Materials: Hardwood, Plywood, Softwood, Suitable for: Handheld and Table-Mounted Portable Routers
Freud 42-110 Flush Trim Router Bit Bosch 85441MC Laminate Flush Trim Router Bit Freud 44-100 Flush Trim Router Bit
FLUSH TRIM ROUTER BIT
Our Price: $37.69
FLUSH TRIM ROUTER BIT
Our Price: $40.29
Bits can do more than just trim laminate, can be used for pattern work. Cuts all composition materials, laminates, plywood, hard wood and soft wood. Use on portable or table mounted routers. 3/8" bearing. Ground carbide with titanium for long life. Anti-kickback. Premium-quality micrograin carbide tips are ground on specialized CNC equipment for an extra-fine finish with maximum sharpness and edge retention. Flush trim bits are used for laminate work or for template and pattern work. For template application, the bearing follows the template, while the cutting edges trim the work piece. Double flute trim bit allows for a smoother finish. The fully hardened and tempered steel shank provides ultimate durability. Bits can do more than just trim laminate, can be used for pattern work. Cuts all composition materials, laminates, plywood, hard wood and soft wood. Use on portable or table mounted routers. 3/8" bearing. Ground carbide with titanium for long life. Anti-kickback.
Freud 34-120 Round over Router Bit TRDNL BEADING ROUTER BIT 1/8IN Freud 40-114 Chamfer Router Bit
Bits are often used to soften the edge of furniture. Shear angle provides the smoothest cut available. Cuts all composition materials, plywood, hardwood and softwood. Use on handheld and table-mounted portable routers. 1/2 in bearing Dia. Creates a uniform chamfer on the edge of any workpiece to add character, while retaining crisp geometric lines.
Bosch 85595MC Round over Router Bit Freud 34-124 Round over Router Bit TRDNL BEADING ROUTER BIT 3/16
Premium-quality micrograin carbide tips are ground on specialized CNC equipment for an extra-fine finish with maximum sharpness and edge retention. Roundover bit creates attractive decorative edging that gives a unique finish to the workpiece. The fully-hardened and tempered steel shank provides ultimate durability. Bits are often used to soften the edge of furniture. Shear angle provides the smoothest cut available. Cuts all composition materials, plywood, hardwood and softwood. Use on handheld and table-mounted portable routers. 1/2 in bearing Dia.
COVE ROUTER BIT 2-CUTTER 1/2IN Freud 44-108 Flush Trim Router Bit BIT ROUTER BULLNS 19/32X1/2IN
Bits can do more than just trim laminate, can be used for pattern work. Cuts all composition materials, laminates, plywood, hard wood and soft wood. Use on portable or table mounted routers. 3/8 in bearing. Ground carbide with titanium for long life. Anti-kickback. Bosch carbide-tipped router bits deliver precision and durability. They feature premium-quality micro grain carbide tips that are engineered with a special heat treating process for an extra-fine finish. The tips provide maximum sharpness and edge retention. The fully hardened and tempered steel shanks provide ultimate durability. These bits retain painstaking accuracy across hundreds of profiles for mortising, edge forming, trimming, surface forming and cabinetry/joinery in wood, plastic and laminate.
ROMAN OGEE ROUTER BIT 1-5/16IN Freud 99-240 Router Bit Freud 38-106 Roman Ogee Router Bit
Forms a strong joint between the sides and front of a drawer. Drawer fronts are formed horizontally, flat on table surface. Drawer sides are formed vertically against the fence of the table. Cuts all composite materials, plywood, hardwood and softwood. Profile can be changed by changing the height of bit. Cuts all composition materials, plywood, hardwood and softwood. Use on handheld and table-mounted portable routers. 3/8 in bearing Dia.
Freud 50-509 Flush Trim Router Bit Freud 34-126 Round over Router Bit COVE&BEAD ROUTER BIT 4C 1-9/16
Designed to produce precision cuts in almost any trimming or pattern routing application with bearings above and below the cutting edge. Bits are often used to soften the edge of furniture. Shear angle provides the smoothest cut available. Cuts all composition materials, plywood, hardwood and softwood. Use on handheld and table-mounted portable routers. 1/2 in bearing Dia.
Freud 34-127 Round over Router Bit CLSC C&R ROUTER BIT 4C 1-3/8IN Freud 75-106 Router Bit
Bits are often used to soften the edge of furniture. Shear angle provides the smoothest cut available. Cuts all composition materials, plywood, hardwood and softwood. Use on handheld and table-mounted portable routers. 1/2 in bearing Dia. Up spiral bits combine effective chip removal with a cut that can't be matched by standard straight bits. Computer designed flutes provide the chip removal required in production settings. Suited for cutting mortices or routing deep blind holes. Excellent for grooves and dados in all composition materials, plywood, hard wood and soft wood. Use on CNC and other automatic routers as well as hand held and table mounted portable routers.
Bosch 84624MC Tongue Groove Router Bit BIT ROUTER RNDOVER 3/4X1IN Freud 99-063 Router Bit
Premium-quality micrograin carbide tips are ground on specialized CNC equipment for an extra-fine finish with maximum sharpness and edge retention. Tongue and groove bit cuts ideally fitted tongue-and-groove joints. The fully-hardened and tempered steel shank provides ultimate durability. Bosch carbide-tipped router bits deliver precision and durability. They feature premium-quality micro grain carbide tips that are engineered with a special heat treating process for an extra-fine finish. The tips provide maximum sharpness and edge retention. The fully hardened and tempered steel shanks provide ultimate durability. These bits retain painstaking accuracy across hundreds of profiles for mortising, edge forming, trimming, surface forming and cabinetry/joinery in wood, plastic and laminate. Routes graceful inverted ogee profile on the face of the door, with a ball bearing guide to follow edge of straight or curved surfaces.
Freud 32-524 Multi-Rabbeting Router Bit Set ROUND NOSE ROUTER BIT 2C 1/2IN Freud 99-064 Router Bit
With interchangeable bearings to cut rabbets of different depths, these sets produce super-smooth cuts on both surfaces of the rabbet. Features same door face profile as the No Lip bit, but this tool also provides a handy finger pull shape along the edge of the door. Can be used it on all four edges of the door or combined with the "No Lip" bit if the finger pull shape is only desired on certain edges.
HALF ROUND BIT W/BEARING 1/4IN Freud 34-128 Round over Router Bit Freud 75-108 Router Bit
Bits are often used to soften the edge of furniture. Shear angle provides the smoothest cut available. Cuts all composition materials, plywood, hardwood and softwood. Use on handheld and table-mounted portable routers. 1/2 in bearing Dia. Up spiral bits combine effective chip removal with a cut that can't be matched by standard straight bits. Computer designed flutes provide the chip removal required in production settings. Suited for cutting mortices or routing deep blind holes. Excellent for grooves and dados in all composition materials, plywood, hard wood and soft wood. Use on CNC and other automatic routers as well as hand held and table mounted portable routers.
Freud 99-031 Reversible Glue Joint Router Bit Freud 99-036 Tongue and Groove Router Bit Set Quadra-Cut 99-513 Router Bit
Provides a stronger joint by increasing the surface area for glue. Plane boards to a uniform thickness, align bit to the center of the board, then reverse each board for the glue joint. Cuts all composition materials, plywood, hardwood and softwood. Use on CNC and other automatic routers as well as table mounted portable routers. Produces perfectly fitted tongue and groove joints. Opposing shear angles of the tongue cutter ensures flawless finish. Adjustable for stock thickness of 1/2 in to 1-1/4 in and groove widths of 7/32 in to 3/8 in. Cut all composition materials, plywood, hardwood and softwood. Use on table mounted portable routers. Design combines two small wings that cut downward to shear the top edge for a splinter-free surface and two large wings that shear upward for a smooth finish. Produces raised panels for doors and paneling. Use 1/2 in H for 5/8 in stock. Use 5/8 in height for 3/4 in stock. Cuts all composite materials, plywood, hardwood and soft wood. Use on table mounted portable routers.
Freud 99-035 Router Bit Quadra-Cut 99-520 Router Bit TBL EDGE&HANDRAIL BIT 2-19/32
Produces locking miter joints. Run one board vertically and run the piece to be joined horizontally. Cuts all composition materials, plywood, hardwood and softwood. Use on CNC and other automatic routers as well as table mounted portable routers. Revolutionary Quadra-Cut? design combines two small wings that cut downward to shear the top edge for a splinter-free surface and two large wings that shear upward for a smooth finish.
ROUNDING OVR ROUTER BIT 4C 1IN STACKED SLOTTING SET 2X3-1/4IN Freud 99-037 Finger Joint Router Bit
For joining wood edge to edge or end to end. Produces a joint that is stronger than the wood itself. Tips on each side of the bit are offset, cutting twice as many fingers as you see tips on each side of the bit. Use on CNC and other automatic router as well as table mounted portable routers.
Quadra-Cut 99-566 Router Bit with Back Cutters Quadra-Cut 99-569 Router Bit with Back Cutters
Raised panel bits with back cutter to produce panels from 3/4 in stock that are flush with the door frame for a professional look. Finished doors can be sanded with a wide belt sander or drum sander for easiest finishing. Shims are included to allow adjustments of the tongue thickness from 7/32 to 1/4 in. Cuts all composition materials, plywood, hardwood and soft wood. Use on table mounted portable routers. Raised panel bits with back cutter to produce panels from 3/4 in stock that are flush with the door frame for a professional look. Finished doors can be sanded with a wide belt sander or drum sander for easiest finishing. Shims are included to allow adjustments of the tongue thickness from 7/32 to 1/4 in. Cuts all composition materials, plywood, hardwood and soft wood. Use on table mounted portable routers.