Home > POWER TOOLS & ACC > POWER TOOLS > ROTARY TOOLS & ENGRAVERS > ROTARY TOOL ACCESSORIES
Sort By:
Page of 2
Dremel Bosch Sanding Band Dremel 541 Grinding Wheel Dremel EZ Lock Finishing Abrasive Buff Set
A cylinder covered with aluminum oxide abrasive that sits atop a mandrel with a 1/8 in shank. The replaceable band covering the cylinder is available in extra fine (240 grit), fine (120 grit) or coarse (60 grit). The Dremel? aluminum oxide grinding wheel features a high-quality industrial abrasive that's made for extended general-purpose grinding on metals, castings, welded joints, rivets and rust. 1/8 in shank. Dremel Abrasive Buff, Aluminum Oxide/Silicone Carbide, 1 in Dia, Suitable for: Dremel Rotary Tools, Includes: (1) Coarse 180 Grit and (1) Medium 280 Grit
Dremel 414 Felt Polishing Wheel Dremel 560 Cutting Bit Dremel 401 Mandrel
Disc used to polish most metal and plastic surfaces. Using No.421 polishing compound with wheels produces a high luster. Use with No.401 mandrel. Do not run in excess of 30,000 RPM. Get a drywall bit that makes fast, clean cuts. Our high-speed drywall cutting bit features a 1/8 in steel shank and a piloted tip for easy cutting around outlet and switch boxes. Ideal for cutting drywall for electrical boxes, air vents and other wall features. Dremel Mandrel, HSS, Dimensions: 3 in L, Suitable for: Model 414, 422 and 429 Dremel Accessories
Dremel 432 Drum Sander Band Dremel 408 Drum Sander Band Dremel 402 Mandrel
A cylinder covered with aluminum oxide abrasive that sits atop a mandrel with a 1/8 in shank. The replaceable band covering the cylinder is available in extra fine (240 grit), fine (120 grit) or coarse (60 grit). A cylinder covered with aluminum oxide abrasive that sits atop a mandrel with a 1/8 in shank. The replaceable band covering the cylinder is available in extra fine (240 grit), fine (120 grit) or coarse (60 grit). To be used with all cutting wheels, sanding discs and polishing wheels.
Dremel 932 Grinding Stone Dremel 8193 Grinding Stone Dremel 997 Grinding Stone
A high-quality industrial abrasive made for extended general-purpose grinding on metals, castings, welded joints, rivets and rust. Turn your Dremel? rotary tool into a simple-to-use rotary grinder. Our 8193 aluminum oxide grinding stone features a high-quality industrial abrasive that's ideal for extended general-purpose grinding on metals, castings, welded joints, rivets and rust. A high-quality industrial abrasive made for extended general-purpose grinding on metals, castings, welded joints, rivets and rust.
Dremel 941 Grinding Stone Dremel 85422 Grinding Stone Dremel 952 Grinding Stone
A high-quality industrial abrasive made for extended general-purpose grinding on metals, castings, welded joints, rivets and rust. Use your Dremel? rotary tool as a powerful rotary grinder. Our silicon carbide grinding stone is designed to help you grind and etch stone, glass, ceramics, porcelain and non-ferrous metals. Turn your Dremel? rotary tool into a simple-to-use rotary grinder. Our 952 aluminum oxide grinding stone features a high-quality industrial abrasive that's ideal for extended general-purpose grinding on metals, castings, welded joints, rivets and rust.
Dremel 83322 Grinding Stone Dremel 911 Grinding Stone Dremel 945 Grinding Stone
Silicon carbide grinding stone are designed to grind and etch stone, glass, ceramics, porcelain and non-ferrous metals. A high-quality industrial abrasive made for extended general-purpose grinding on metals, castings, welded joints, rivets and rust. A high-quality industrial abrasive made for extended general-purpose grinding on metals, castings, welded joints, rivets and rust.
Dremel 971 Grinding Stone Dremel 8153 Grinding Stone Dremel 8175 Grinding Stone
A high-quality industrial abrasive made for extended general-purpose grinding on metals, castings, welded joints, rivets and rust. A high-quality industrial abrasive made for extended general-purpose grinding on metals, castings, welded joints, rivets and rust. A high-quality industrial abrasive made for extended general-purpose grinding on metals, castings, welded joints, rivets and rust.
Dremel 83142 Grinding Stone Bosch 90930 Carbon Motor Brush Dremel 561 Spiral Cutting Bit
Silicon carbide grinding stone are designed to grind and etch stone, glass, ceramics, porcelain and non-ferrous metals. One pair of motor brushes. For use with Dremel? rotary tool model(s) 100, 200, 275, 285, 300, 395 and 595 (Type 3, 4, 5 and 6). And Dremel? contour sander 6000 (Type 1 and 2). Turn your Dremel? rotary tool into a simple-to-use rotary saw. Our 561 high-speed multi-purpose cutter gives you the power to easily cut wood, plastic, fiberglass, drywall, laminate and aluminum and vinyl siding. 1/8 in steel shank.
Bosch 431 Oscillating Tool Accessories Dremel 454 Precision Ground Sharpening Stone Dremel 455 Precision Ground Sharpening Stone
A cylinder covered with aluminum oxide abrasive that sits atop a mandrel with a 1/8 in shank. The replaceable band covering the cylinder is available in extra fine (240 grit), fine (120 grit) or coarse (60 grit). Dremel? chain saw sharpening stone is for use with Dremel? chain saw sharpener attachment. This replacement stone provides an excellent cutting edge on the chain saw's cutting tooth. Having a sharp chain saw blade improves chain saw performance and safety. Precision ground abrasive stone for quick, easy sharpening of chain saw blades.
EZ-Lock 423E/423 Polishing Wheel Dremel 453 Precision Ground Sharpening Stone Dremel 512E Finishing Abrasive Buff
The DERMEL EZ lock makes accessory changes easy as pull twist release. The one-piece mandrel design simplifies the process of changing accessories, for use with the EZ402 EZ lock mandrel or standard 402 mandrel. Dremel? accessories are designed to be just what you need to complete projects. This grinding stone is for used to sharpen chain saw blades. For use with the Dremel? chain saw sharpening attachment. The 512E 320-grit abrasive buff is ideal for use on metal, glass, wood, aluminum and plastics and can easily remove tarnish from brass.
Dremel 422 Felt Polishing Tip Dremel 540 Cut-Off Wheel Dremel 429 Felt Polishing Wheel
The 3/8 in felt polishing point is made to take a semi-rough finish and polish it to a smooth finish. Ideal for general polishing of most ferrous metals, stones, glass and ceramics. Can be used with 421 polishing compound. This wheel for cutting metal with limited use on wood and plastic. Cut-Off wheels make it easy to cut or slot bolts, screws, sheet metal, thin wood and plastic. The cut-off wheel cuts only along its edge. Do not attempt to sand or cut curved holes with them. The 1 in felt polishing wheel is made to take a semi-rough finish and polish it to a smooth finish.
Dremel 108 Short Cylinder Engraving Cutter SLEVE SNDG FINE GRIT 1/2X1/2IN SLEVE SNDG MED GRIT 1/2X1/2IN
Dremel Engraving Cutter, 1/32 in Dia, Shank Diameter: 1/8 in, Point Type: Inverted Cone, HSS, 1-1/2 in L, Applicable Materials: Fiberglass, Plastic, Wood Can be used to replace or add sanding sleeves to Forney? Industries item# 60217, four piece 1/2 x 1/2 in red grit sanding drum kit with 1/8 in shaft. Can be used to replace or add sanding sleeves to Forney? Industries item# 60217, four piece 1/2 x 1/2 in red grit sanding drum kit with 1/8 in shaft.
SLEVE SNDG CRS GRIT 1/2X1/2IN Bosch Accessories 113 Engraving Cutters Dremel 430 Drum Sander Band
Can be used to replace or add sanding sleeves to Forney? Industries item# 60217, four piece 1/2 x 1/2 in red grit sanding drum kit with 1/8 in shaft. Use for detail engraving, carving and routing in wood, fiberglass, ceramics, plastic, jewelry and soft metals. Do not run in excess of 30,000 rpm. Sanding band covered with 60 grit aluminum oxide abrasive. Use for rough shaping, smoothing wood or fiberglass, removing rust from metal surfaces and shaping rubber surfaces. Bands are easily replaceable on drums. Do not use in excess of 30,000 rpm.
WHEEL KIT STL WRE 15000RPM 2PC BRUSH CARBON STEEL 3/4IN 2PK BRUSH CARBON STEEL 1/2IN 2PK
Forney Wire Brush Set, 1 in Diameter, 1/8 in Arbor/Shank, Steel Bristle, 15,000 rpm Speed, Suitable for: 1/8 in Shank Dremel, Moto-Tool, Craftsman, Wizard, Black & Decker Tools, Includes: (2) Wire Brushes Versatile brush for removing rust and corrosion and polishing metal surfaces. Deburr and blend surface junctures, clean electrical components. Versatile brush for removing rust and corrosion and polishing metal surfaces. Deburr and blend surface junctures, clean electrical components.
Dremel 407 Drum Sander Band Dremel 411 Sanding Disc Dremel 412 Sanding Disc
The Dremel sanding drum mandrel holds a sanding band covered with an aluminum oxide abrasive. Sanding bands used on the sanding drum mandrel are sold separately. 1/2 in bit diameter. Dremel? sanding discs have a finer grit than Dremel? sanding bands and because they mount on a Dremel? 402 mandrel, they provide a flexible surface that allows sanding in contoured and hard-to-reach areas. Sanding discs work well on fiberglass and in removing rust from metal surfaces. Dremel? sanding discs have a finer grit than Dremel? sanding bands and because they mount on a Dremel? 402 mandrel, they provide a flexible surface that allows sanding in contoured and hard-to-reach areas. Sanding discs work well on fiberglass and in removing rust from metal surfaces.
Dremel 413 Sanding Disc DISC SANDING 240GRIT Dremel 106 Engraving Cutter
Dremel? sanding discs have a finer grit than Dremel? sanding bands and because they mount on a Dremel? 402 mandrel, they provide a flexible surface that allows sanding in contoured and hard-to-reach areas. Sanding discs work well on fiberglass and in removing rust from metal surfaces. The Dremel EX lock mandrel makes accessory changes easy as pull twist release, the one-piece mandrel design simplifies the process of changing sanding discs and makes it easy to sand flat surfaces and edges, for use with the EZ402 EZ lock mandrel. DREMEL Engraving Cutter, 1/16 in Dia, 1/8 in Dia Shank, Ball Point, HSS, 1-1/2 in L, Applicable Materials: Fiberglass, Plastic, Wood
Dremel 107 Engraving Cutter Dremel 105 Engraving Cutter WHEEL SIC IMPREGNATED 1/2IN
Turn your Dremel? rotary tool into a powerful high-speed cutter. Create stylish designs on wood, fiberglass, ceramics, jewelry, soft metals and more. Our powerful, simple-to-use engraving cutters make it easy to express your creativity. A polishing wheel for your rotary tool that has the polishing compound inside. The 520-02 polishing wheel is impregnated with a silicon carbide abrasive and lubricant, eliminating the need for polishing compound. Easy-to-use and less messy, the 520-02 is ideal for high-luster polishing. Pack includes two polishing wheel accessories.
PAD BUFFING SAT 30000RPM 3/4IN CUT-OFF WHEEL SET 1-1/4IN 3PC Dremel 953 Grinding Stone
Forney Buffing Pad with Shaft, Satin, 3/4 in Diameter, 30,000 rpm Speed, Applicable Materials: Gold, Silver Forney Cut-Off Wheel, Aluminum Oxide Abrasive, 1-1/4 in Arbor, 30,000 rpm Speed, Applicable Materials: Metal, Includes: (3) Cut-Off Wheels Dremel? 953 aluminum oxide grinding stone. A high-quality industrial abrasive made for extended general-purpose grinding on metals, castings, welded joints, rivets and rust.
Dremel 84922 Grinding Stone BRUSH STAINLESS STEEL 3/4IN BRUSH STAINLESS STEEL 1/2IN
Dremel? silicon carbide grinding stone. Designed to grind and etch stone, glass, ceramics, porcelain and non-ferrous metals. Stainless steel brushes do not cause after-rust when used on corrosion-resistant materials like pewter, aluminum and stainless steel. Ideal for cleaning, deburring and surface-finishing. Very effective on flat surfaces and in hard-to-reach places, such as slots. Stainless steel brushes do not cause after-rust when used on corrosion-resistant materials like pewter, aluminum and stainless steel. Ideal for cleaning, deburring and surface-finishing. Very effective on flat surfaces and in hard-to-reach places, such as slots.
BRUSH STAINLESS STEEL 1/8IN BRUSH BRASS 1/8 INCH 2PK Dremel 118 High Speed Cutter
Stainless steel brushes do not cause after-rust when used on corrosion-resistant materials like pewter, aluminum and stainless steel. Brass brushes are non-sparking and softer than steel. They will not scratch soft metals like gold, copper, brass. Made of high-quality steel. Use for shaping, hallowing, grooving, slotting, making tapered holes in soft metals, plastics and woods. Do not run in excess of 30,000 rpm.
Dremel 124 Rotary Tool Bit Dremel 654 Router Bit Dremel 504 Flap Wheel
Made of high-quality steel. Use for shaping, hallowing, grooving, slotting, making tapered holes in soft metals, plastics and woods. Do not run in excess of 30,000 rpm. Our 1/4 in straight router bit makes routing, inlaying and mortising in wood and other soft materials simple. Designed to work with the Dremel 335 plunge router attachment and the 231 shaper/router table. Made of high-speed steel. Flapwheels grind and polish flat or contoured surfaces. They are used most effectively as a finishing sander after heavier surface sanding and material removal is completed.
Dremel 505 Flapwheel Sander Dremel 121 Rotary Tool Bit CUT-OFF WHEEL SET 1-1/2IN 3PC
Flapwheels grind and polish flat or contoured surfaces. They are used most effectively as a finishing sander after heavier surface sanding and material removal is completed. Dremel Cutter, 1/4 in Dia, Shank Diameter: 1/8 in, Point Type: Pear, 35,000 rpm, HSS, 1-1/2 in L, Applicable Materials: Plastic, Soft Metal, Wood Forney Cut-Off Wheel, Fiberglass Backing, 40,000 rpm Speed, 1-1/2 in Diameter, 1/32 in Thickness, Applicable Materials: Metal
MOUNTED PT SET 1/8IN SHAFT 3PC WHEEL EMERY IMPREGNATED 1IN Dremel 144 Rotary Tool Bit
Includes 1/2 in x 1/2 in cylinder, 1/4 in x 1/2 in ball end and 1/8 in tree point mounted points with 1/8 in shaft. For cutting soft metals, wood, plastic. Emery impregnated disc is ideal for general polishing of most ferrous metals, stones, glass and ceramics. Also ideal to clean and define grooves. Use it to remove small burrs and scratch marks left by grinding and sanding. Made of high-quality steel. Use for shaping, hallowing, grooving, slotting, making tapered holes in soft metals, plastics and woods. Do not run in excess of 30,000 rpm.
Dremel 193 High Speed Cutter Dremel 114 Rotary Tool Bit Dremel 191 Rotary Tool Bit
Made of high-quality steel. Use for shaping, hallowing, grooving, slotting, making tapered holes in soft metals, plastics and woods. Do not run in excess of 30,000 rpm. Dremel Cutter, 5/16 in Dia, Shank Diameter: 1/8 in, Point Type: Ball, 35,000 rpm, HSS, 1-1/2 in L, Applicable Materials: Plastic, Soft Metal, Wood Turn your Dremel? rotary tool into a powerful high-speed cutter. Made of rugged, long-lasting steel, our high-speed bits are ideal for cutting through wood, plastic and soft metals. Makes shaping, hollowing, grooving, slotting and inlaying simple.
BRUSH CARBON STEEL 1/8IN 2PK KIT SANDING DRUM 1/2X1/2IN 4PC Dremel 134 Rotary Tool Bit
Versatile brush for removing rust and corrosion and polishing metal surfaces. Deburr and blend surface junctures, clean electrical components. Forney Sanding Drum Kit, Rubber Backing, Brown, Medium Grit Grade, 1/2 in Diameter Drum, 1/2 in Drum Length, Includes: Mounted Rubber Drum with 1/8 in Shaft, Fine, Medium, Coarse Grit Sanding Sleeves Dremel Cutter, 5/16 in Dia, Shank Diameter: 1/8 in, Point Type: Round, 25,000 to 30,000 rpm, HSS, 1-1/2 in L, Applicable Materials: Plastic, Soft Metal, Wood
Dremel 9910 Rotary Tool Bit Dremel 199 High Speed Cutter BRUSH BRASS 3/4 INCH 2PK
Dremel Cutter, 1/8 in Dia, Shank Diameter: 1/8 in, 35,000 rpm, Tungsten Carbide, 1-1/2 in L, Applicable Materials: Cast Iron, Ceramic, Hardened Steel, Hardwood, Non-Ferrous Metal, Plastic, Stainless Steel Made of high-quality steel. Use for shaping, hallowing, grooving, slotting, making tapered holes in soft metals, plastics and woods. Do not run in excess of 30,000 rpm. Wheel tip for general-purpose use. Non-sparking and softer than steel. Will not scratch soft metals like gold, copper, brass.
Dremel 503 Flap Wheel Dremel 420 Cut-Off Wheel Dremel 502 Flap Wheel
Flapwheels grind and polish flat or contoured surfaces. They are used most effectively as a finishing sander after heavier surface sanding and material removal is completed. Get a 15/16 in Dia cut-off wheel made of a hard abrasive material that's used for slicing and cutting metal, including hardened steel. Our cut-off wheel makes it easy to cut bolts or screws or make slots in rusted or stripped bolts and screws to allow for easy removal with a screwdriver. Flapwheels grind and polish flat or contoured surfaces. They are used most effectively as a finishing sander after heavier surface sanding and material removal is completed.
CUP BRUSH SET BRS 15000RPM 2PC Dremel EZ471SA Detail Coarse Abrasive Brush Dremel EZ472SA Detail Medium Abrasive Brush
Forney Cup Brush Set, 3/8 in Diameter, Suitable for: Dremel, Moto-Tool, Craftsman, Wizard, Black & Decker Rotary Tools For detail cleaning and light sanding. Use on metal, glass, wood, aluminum and plastics. Use with either EZ402 (SKU #482.4447) or 402 (SKU #619.9400). For detail cleaning and light sanding. Use on metal, glass, wood, aluminum and plastics. Use with either EZ402 (SKU #482.4447) or 402 (SKU #619.9400).
Dremel EZ473SA Detail Fine Abrasive Brush BRUSH NYLON BRISTLE 3/4IN 2PK Dremel 7134 Abrasive Wheel Point
For detail cleaning and light sanding. Use on metal, glass, wood, aluminum and plastics. Use with either EZ402 (SKU #482.4447) or 402 (SKU #619.9400). Ideal for light deburring, general cleaning and polishing in hard to reach places such as slotted surfaces. Long wearing nylon bristles. Can also be used for cleaning hard plastic such as graphite golf clubs or aluminum wheels. Can be used with polishing compound. For fine detail work, cutting, engraving, carving, touch-up and finishing. Use on wood, jade, ceramic, glass, hardened steel, semi-precious stones and other hard materials. Bits are covered with diamond particles.
CUT-OFF WHL SET W/MANDREL 2PC Dremel 9903 Rotary Tool Bit Dremel 9904 Rotary Tool Bit
Forney Cut-Off Wheel Kit, Fiberglass Backing, 1/8 in Arbor, 30,000 rpm Speed, 1-1/4 in Diameter, Applicable Materials: Metal, Includes: (1) 1/8 in Mandrel Shapes, smoothes or grinds especially hard materials such as hardened steel, stainless steel, cast iron, non-ferrous metals, fired ceramics, plastics and hard woods. Do not run in excess of 30,000 rpm. Dremel Cutter, 3/32 in Dia, Shank Diameter: 1 in, 35,000 rpm, Tungsten Carbide, 1-1/2 in L, Applicable Materials: Cast Iron, Ceramic, Hardened Steel, Hardwood, Non-Ferrous Metal, Plastic, Stainless Steel