|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Hot dipped galvanized joist. 2-3/4 in x 5 in x 1/8 in.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Panel-mounted rocker switch for use with pump that draws 10 A or less. 1/4 in spade terminals. 6 V through 32 VDC only.
|
Galvanized steel cleat. 8 in.
|
Pre-spliced, double-braided marine-grade dock line. For boats up to 20 ft.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Pre-spliced, double-braided marine-grade dock line. For boats up to 20 ft.
|
For OMC, Johnson and Evinrude. Features ultrasonically welded acetal. 3/8 in Barb.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
US Hardware Drain Plug, Stainless Steel, Suitable for: 1 in Dia Drain
|
Brass. For 1 in Dia drains.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Cam-action neoprene plugs. Snap shut to form a leak-proof stopper for Livewells or Baitwells.
|
Cam-action neoprene plugs. Snap shut to form a leak-proof stopper for Livewells or Baitwells.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Multinautic 10000 Inside Corner, Mounting Hole Size: 7/16 x 3/4 in, Dimensions: 6 in L x 5 in W x 1/8 in Thick, Galvanized, Suitable for: Stationary Dock with #10003 or #10010 Back Plate
|
All round light. Rubber storage clips hold pole when not in use. Nickel-plated brass finish washer suitable for up to #8 fastener.
|
Fits most engines with side water inlets. Flushes away sand, silt, salt and alkali. Prevents clogging and corrosion, extending the engine life. Installs in seconds without tools.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Pre-drilled to accommodate four #6 screws. Durable chrome-plated brass ring is small enough to fit on most hatches, cabinets and drawers.
|
Multinautic Side Leg Holder, 7/16 x 3/4 in Mounting Hole, Dimensions: 5 x 5 x 1/8 in, Metal, Suitable for: 3/8 in Bolts
|
Fuel connector, male for OMC engines. Brass construction and 1/4 in NPT thread.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Multinautic Inside/Outside Anchor Chain Plate, 9/16 x 1 in Mounting Hole, Dimensions: 10 x 3-1/2 x 1/4 in, Steel, Galvanized, Suitable for: 1/2 in Bolts
|
6 in flip-up cleat. Cast aluminum.
|
6 in flip-up cleat. Cast aluminum.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Recommended for boats up to 12 m. Non-flammable, no CFC's. Good for over 80 blasts. Ideal for marine safety sporting events.
|
US Hardware Drain Plug, Corrosion-Resistant, Stainless Steel, Suitable for: 1 in Dia Drain
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Multinautic 13300 Inside Corner, Mounting Hole Size: 9/16 x 1 in, Dimensions: 6 in L x 5 in W x 1/4 in Thick, Galvanized, Suitable for: Floating Dock with 13300-03 or 13300-04 Back Plate
|
Hot dipped galvanized hinge. 3-1/2 in x 5 in x 3/16 in.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
US Hardware Two-Position Switch, 2-Wire Marine, Specifications: 12 VDC, Chrome
|
Replace ultra-flow bulb. Large alcohol compounded primer bulb for 3/8 in fuel line assemblies. Reduces flow restriction for maximum flow.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Protects the side and top of the dock with 1-1/4 in cushion above dock level. Solid flaps attach easily to any dock. Excellent cushioning protects boat and dock from each other. Color is permanently molded into the vinyl and will not transfer to the hull.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The special shape of this heavy-duty dock hardware part makes it versatile for both stationary or floating wood dock. For posts up to 2 in OD or chain up to 5/16 in.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For boats up to 39.4 ft length. Die-cast Zamak with perma-plate chrome finish. Light includes one 7.5 W lamp. Base is pre-drilled with two countersunk holes for #8 screws. Size 1-3/8 in x 2-3/4 in x 2-1/2 in.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Recommended for boats up to 12 m. Non-flammable, no CFC's. Good for over 80 blasts. Ideal for marine safety sporting events.
|
Molded one-piece construction of white marine vinyl. Smooth, round shape assures fewer hull abrasions. Grommets are integrally molded into each end to allow easy vertical or horizontal use.
|
Industrial, heavy-duty gauge 5 in x 5 in x 1/4 in. Used to connect two floating docks together.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Pumps water level down to 3/8 in. Comes with compact 3/4 ID hose with 3-5/16 in high. For use with 12 VDC systems only. Outputs 600 gph at 0 deg rise. Will perform at reduced capacity up to 3 ft rise.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
US Hardware Round Light, Specifications: 26 in to 48 in Adjustable, Dimensions: 36 in L
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Super Blast? air horn shoots a powerful blast of noise. Meets US Coast Guard requirements for boats up to 65 ft or 20 m. Perfect for auto, boat, sporting events and more.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
US Hardware Air Horn Refill, Specifications: 8 oz Size
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Highly polished and anodized. 4 ft wide steps. For floating or stationary docks. Detachable steps for wintertime. Stainless steel hardware. Compatible with flip-up kit to raise it out of the water when needed. Allows step additions.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
VIEW MAP & PHOTO GALLERY | CALL US: 406-466-3100