Home > AUTOMOTIVE > GENERAL AUTOMOTIVE > AUTOMOTIVE ELECTRICAL > LAMP ASSEMBLYS
Sort By:
Go
Page of 2
Victor V308 Lens Repair Tape
Victor V309 Lens Repair Tape
Peterson V108 Clearance/Side Marker Light
Use on parking light, directional light and side marker light. 1-7/8 in x 5 ft, on a card. Use on parking light, directional light and side marker light. 1-7/8 in x 5 ft, on a card. Acrylic lens features built-in reflector and precision OE style, prism optics for a brilliant signal and to eliminate the need for a separate reflector. Includes a durable molded base with single bulb socket and single lead wire; grounds through mounting screw. 4-1/8 in W x 2 in H x 1-1/32 in D, mounts on 3 in centers.
TAPE REDLENS REPAIR 1.875X60IN
Peterson V107WR Mini Clearance/Side Marker Light
Peterson V107WA Mini Clearance/Side Marker Light
3M? red lens repair tape 03441 is designed for temporary repairs of broken or cracked taillights, parking lights and side directional lights. This flexible tape is suited for both flat, curved tail or signal lights. Functions as clearance, side marker or identification light and may be used as combination side marker and clearance light when properly mounted. Durable base with external mounting holes. Lens snap-locks onto base. Includes single lead wire and grounds through mounting screw. 3-1/4 in W x 1 in x 1-1/8 in D, mounts on 2-3/4 in centers. Functions as clearance, side marker or identification light and may be used as combination side marker and clearance light when properly mounted. Durable base with external mounting holes. Lens snap-locks onto base. Includes single lead wire and grounds through mounting screw. 3-1/4 in W x 1 in x 1-1/8 in D, mounts on 2-3/4 in centers.
Peterson V114 Stud Mount Clearance/Side Marker Light
Peterson V108 Clearance/Side Marker Light
Peterson V440-15 Square Replacement Lens
Stud mount side marker or clearance light with built-in reflector optics to eliminate the need for a separate reflector. Push stripped power wire into "Quick-Lock" port to connect. Single wire for electrical connection. Features 15,000 hr long life bulb. Acrylic lens features built-in reflector and precision OE style, prism optics for a brilliant signal and to eliminate the need for a separate reflector. Includes a durable molded base with single bulb socket and single lead wire; grounds through mounting screw. 4-1/8 in W x 2 in H x 1-1/32 in D, mounts on 3 in centers. Tough molded acrylic lens. Used to replace lenses of Peterson No 440, 441, 444 and 452 series lights. 4-1/2 in square.
Peterson V135R Oblong Clearance/Side Marker Light
Peterson V138R Double Bull Eye Clearance/Side Marker Light
Peterson V138A Double Bull Eye Clearance/Side Marker Light
Acrylic lens snap-seals onto housing. Single wire connection, grounds through mounting hardware. 15,000 hrs long-life bulb. When properly mounted, may be used as combination side marker and clearance light. 4-1/8 in W x 2 in H x 1-1/32 in D, mounts on 3 in centers. Acrylic lens snaps onto housing. Two bulb lamp functions as clearance or side marker light and may be used as combination clearance and side marker when properly mounted on 3 in centers and grounded through mounting hardware. Single wire for electrical connection. 15,000 hrs long life bulbs. 4 in W x 2 in H x 1-1/8 in D. Acrylic lens snaps onto housing. Two bulb lamp functions as clearance or side marker light and may be used as combination clearance and side marker when properly mounted on 3 in centers and grounded through mounting hardware. Single wire for electrical connection. 15,000 hrs long life bulbs. 4 in W x 2 in H x 1-1/8 in D.
Peterson V135A Oblong Clearance/Side Marker Light
Peterson V438 Utility License Plate Light
Peterson V434 Mini Utility Surface Mount Courtesy Light
Acrylic lens snap-seals onto housing. Single wire connection, grounds through mounting hardware. 15,000 hrs long-life bulb. When properly mounted, may be used as combination side marker and clearance light. 4-1/8 in W x 2 in H x 1-1/32 in D, mounts on 3 in centers. For courtesy, interior or instrument lights, commonly used to illuminate license plate or step bumpers. Chrome-plated steel housing snaps into 1-1/4 in Dia holes. 1-1/2 in Dia overall. 2 required for legal license illumination. Mounts with two stainless steel screws on 2 in centers and has separate ground wire for non-metallic surfaces. Polished, chrome-plated brass housing with hooded shield to prevent upward glare. 2-9/16 in W x 1-3/16 in H x 1 in D.
Peterson V440 Combination Tail Light
Peterson V435 Surface Mount License Plate Light
Peterson V440L Combination Tail Light
Under 80 in wide combination taillight. Includes the following functions - stop, turn, tail, rear reflex, side marker and side reflex. Includes lead wire. Grounds through 1/4 in mounting studs. Studs on 2 in centers. Chrome-plated steel housing and mounting bracket in traditional styling for numerous applications. 1-7/8 in projection, 2-3/4 in W x 2 in H bracket mounts on 2 in centers. Under 80 in wide combination taillight. Includes the following functions - stop, turn, tail, rear reflex, side marker and side reflex. Includes lead wire. Grounds through 1/4 in mounting studs. Studs on 2 in centers.
Peterson V428S Stud Mount Combination Tail Light
Piranha V168XR LED Slim Line Clearance/Side Marker Light Kit
LIGHT MARKER LED 6 DIODE AMBER
Wrap-over lens retained by 2 screws. Black, plastic dust-resistant housing. Supplied with 10 in lead wires. Universal stud mount with 1/4 in studs on 2 in centers. 3-3/4 in H x 2-5/8 in D overall. Sealed 2-diode LED light that functions as clearance or side marker light. Operates from 8 to 16 V. Hard-wired with separate lead and ground wires for mounting to all surfaces. Mounts on 1-15/16 in centers. 100,000 hrs rated life. Made in USA. For light and medium-duty applications. 6-diode, oval LED light. Functions as a clearance or side maker light with built-in reflector optics, eliminating the need for separate reflector. Meets DOT lighting requirements. Mounts on industry standard 3 in centers. Includes both lead and ground wire for mounting to all surfaces.
LIGHT MARKER LED 6 DIODE RED
Piranha V168XA LED Slim Line Clearance/Side Marker Light Kit
MARKER & CLRNC LT LED RECT RED
For light and medium-duty applications. 6-diode, oval LED light. Functions as a clearance or side maker light with built-in reflector optics, eliminating the need for separate reflector. Meets DOT lighting requirements. Mounts on industry standard 3 in centers. Includes both lead and ground wire for mounting to all surfaces. Sealed 2-diode LED light that functions as clearance or side marker light. Operates from 8-16 V. Hard-wired with separate lead and ground wires for mounting to all surfaces. Mounts on 1-15/16 in centers. 100,000 hrs rated life. Made in USA. PM Marker/Clearance Light, Rectangular, 9 to 16 V, Lamp Type: LED, Lens Color: Red, Stud Mounting, 0.93 in W, 2 in H
MARKER&CLRNC LT LED W/RFLX AMB
MARKER&CLRNC LT LED W/RFLX RED
Peterson V153KA LED Clearance/Side Marker Light Kit
PM Marker Light, Rectangular, 12 V, Lamp Type: LED, Lens Type: Impact-Resistant, Lens Color: Amber, Surface Mounting, 0.45 in W, 2.31 in H, 3.94 in D PM Marker Light, Rectangular, 12 V, Lamp Type: LED, Lens Type: Impact-Resistant, Lens Color: Red, Surface Mounting, 0.45 in W, 2.31 in H, 3.94 in D Built for long-life duty as clearance, side marker or identification light. Lens is welded to housing to form single rugged unit. Includes 153 LED light, 150-095 mounting bracket and plug.
Peterson V170 LED Clearance/Side Marker Light
Peterson V169KA LED Clearance/Side Marker Light Kit
Peterson V169KR LED Clearance/Side Marker Light Kit
Functions as clearance or side marker light. 2-wire, hard-wired design. Operates from 9 to 16 V. Ground wire includes number 10 ring terminal. Mount using center stud or two mounting screws. 3-1/8 in W x 2 in H x 15/16 in. Sealed 2-diode LED light alternative to traditional incandescent 154-Series lights. Operates from 9 to 16 V. Features 2-wire, hard-wired design. Ground wire includes #10 ring terminal. Mounts on 3 in centers. Mounting gasket included. One-piece housing sealed with epoxy eliminates weld joints. 4-1/16 in L x 1-1/16 in W x 15/16 in D. Sealed 2-diode LED light alternative to traditional incandescent 154-Series lights. Operates from 9 to 16 V. Features 2-wire, hard-wired design. Ground wire includes #10 ring terminal. Mounts on 3 in centers. Mounting gasket included. One-piece housing sealed with epoxy eliminates weld joints. 4-1/16 in L x 1-1/16 in W x 15/16 in D.
Peterson V153KR LED Clearance/Side Marker Light Kit
MARKER&CLRNC LT LED AMB 0.75IN
MARKER&CLRNC LT LED RED 0.75IN
Built for long-life duty as clearance, side marker or identification light. Lens is welded to housing to form single rugged unit. Includes 153 LED light, 150-095 mounting bracket and plug. PM Side Marker/Clearance Light, Round, 9 to 16 V, LED Lamp, Amber Lens, Grommet Mounting, 1.06 in Width, 0.51 in Height, Includes: Rubber Mounting Grommet PM Side Marker/Clearance Light, Round, 9 to 16 V, LED Lamp, Red Lens, Grommet Mounting, 1.06 in Width, 0.51 in Height, Includes: Rubber Mounting Grommet
UTILITY LIGHT LED WHITE 0.75IN
Peterson V313 Single Face Pedestal Mount Signal Light
Peterson V428W Stud Mount Combination Tail Light
PM Utility Light, 12 V, Lamp Type: LED, Lamp Color: Clear, Housing Color: Black, Grommet Mounting, Dimensions: 1.07 in H x 0.63 in W x 1.07 in D, Includes: Black Rubber Grommet Durable, black ABS housing with two snap-on amber lenses. PM Stop, Stud Mounting, Plastic Housing Material, Black Housing, 2-5/8 in Width, 3-3/4 in Height, Includes: (3) Stop, Turn and Tail Lights
Peterson V452 Submersible Combination Tail Light
Peterson V452L Submersible Combination Tail Light
LIGHT LICENSE PLATE AUTO LED
Includes the following functions: stop, turn, tail, rear clearance, rear reflex, side marker and side reflex. Features gaskets on both rear and side lenses. Grounds through mounting studs. Mounts on 2 in centers and includes mounting hardware. Includes the following functions: stop, turn, tail, rear clearance, rear reflex, side marker and side reflex. Features gaskets on both rear and side lenses. Grounds through mounting studs. Mounts on 2 in centers and includes mounting hardware. Durable, low-draw LED design. Requires two lights to meet DOT license light requirements when mounted to side of license plate. Also suitable for utility courtesy light applications. Hardwired leads.
Peterson V313 Double Face Pedestal Mount Combination Tail Light
M/C LT LED PC-RATED RND AMBER
M/C LIGHT LED PC-RATED RND RED
Durable, black ABS housing with snap-on red acrylic lens. PM Marker Light, Round, 9/16 V, Lamp Type: LED, Lens Color: Amber, Grommet Mounting, 3/4 in W, 3/4 in H, 3/4 in D, Includes: Rubber Mounting Grommet PM Marker Light, Round, 9/16 V, Lamp Type: LED, Lens Color: Red, Grommet Mounting, 3/4 in W, 3/4 in H, 3/4 in D, Includes: Rubber Mounting Grommet
Peterson V421 Oblong Sealed Combination Tail Light Kit
LIGHT STOP 6-1/2 OVAL LED
LIGHT MARKER LED 2-1/2 RND AMB
Lexan housing and lens sonic welded for a permanent seal. Legal in either vertical or horizontal mounting position for U.S. and ECE applications. Includes No.421R light, No.421-18 grommet and No.421-491 right angle, 3-wire plug with an added terminal for double filament bulb Interchangeable with all competitive units. 6-1/2 in W x 2-1/4 in H. Red grommet mount kit. 9 to 16 V operating range. Skirted weld joint for added protection against moisture. Does not require top positioning to meet FMVSS 108 standards. Compatible with 431-491 connecting plug. Proudly made in the USA. Sealed LED light functions as clearance, side marker or identification light. Accepts industry standard 2-prong plug. 9 to 16 V operating range. Available for grommet mount, flush-mount or surface-mount flange sonic welded to form a single unit. Includes LED light, mounting grommet and 162-49 plug.
LIGHT MARKER LED 2-1/2 RND RED
LIGHT MARKER LED 2IN RND AMB
Peterson V107 Mini  Identification Light Bar
PM Piranha Clearance/Side Marker Light, 9 to 16 V, LED Lamp, Red Housing, 2-1/2 in Diameter, 0.9 in Width, Includes: (6) Clearance/Side Marker Lights PM Clearance/Side Marker Light Kit, 9 to 16 V, LED Lamp, Hard-Wired Mounting, Amber Housing, 2 in Diameter, 0.9 in Width, Includes: LED Light, 146-18 Mounting Grommet, 162-49 Plug Corrosion-resistant, zinc-plated, painted with white baked enamel. Three 3-1/4 in x 1 in x 1-1/8 in #107 compact lights attached to each bar. Lights have acrylic lenses that lock into base to protect against being knocked out. Mounts on 16-1/2 in centers and grounds through mounting hardware. 16-1/8 in W x 1 in H x 1-3/8 in D, 16-1/2 in L with mounting brackets.
Peterson V426 Sealed Combination Tail Light Kit
MARKER & CLRNC LT LED RED 2IN
LIGHT STOP 4-1/4" ROUND LED
Sealed, 4 in round stop, turn and taillight may be used on both curbside and roadside of vehicle or trailer. Fully automated manufacturing process ensures consistent quality and reliability. Features extra wide, spin-welded, tongue-and-groove lens lip and waterproof seal. High performance, copper alloy conductors eliminate the possibility of wire failure. State-of-the art bulb design features three supports for the minor filament and two supports for the major filament providing long bulb life. Wedge-base socket prevents premature bulb failure. Includes light, grommet and 431-491 straight plug. 4-1/4 in Dia. PM Side Marker Light, Round, 9 to 16 V, LED Lamp, Red Lens, Grommet Mounting, 2-1/2 in Width, 0.9 in Height, Includes: Grommet, Plug Industry standard PL3 socket integrated into housing. 9 to 16 V operating range. Meets FMVSS 108 requirements in horizontal, vertical or any 360 deg position. Suitable for over-80 in vehicle width applications. 7-diodes, LED oval. Kit contains light, grommet and plug. Proudly made in the USA.
MRKR&CLRNC LT KIT LED RECT AMB
MRKR&CLRNC LT KIT LED RECT RED
LICENSE LT LED OVAL TOP MT WHT
PM Marker Light, Rectangular, 12 V, Lamp Type: LED, Lens Material: Plastic, Lens Color: Amber, Housing Material: Plastic, Grommet Mounting, 0.84 in W, 1.22 in H, 3.92 in D, Includes: Light and 154-11K Bracket with Terminal Pad PM Marker Light, Rectangular, 12 V, Lamp Type: LED, Lens Material: Plastic, Lens Color: Red, Housing Material: Plastic, Grommet Mounting, 0.84 in W, 1.22 in H, 3.92 in D, Includes: Light and 154-11K Bracket with Terminal Pad PM Oval License Light, 9 to 32 V, Number of Lamps: 1, Lamp Type: LED, Lamp Color: White, Surface, Top Mounting, Dimensions: 3 in L x 1.55 in W x 1.25 in H
MARKER&CLRNC LT RND BH AMB 2IN
MARKER&CLRNC LT RND BH RED 2IN
M/C LT DBL BULLS-EYE AMB 4X2IN
PM Marker Light, Round, 12 V, Lamp Type: LED, Lens Color: Amber, Grommet Mounting, 1.77 in W, 2.54 in H, 2.54 in D PM Marker Light, Round, 12 V, Lamp Type: LED, Lens Color: Red, Grommet Mounting, 1.77 in W, 2.54 in H, 2.54 in D PM Marker/Clearance Light, Double Bulls-Eye, Rectangular, 9 to 32 V, Lamp Type: LED, Lens Color: Amber, Surface Mounting, 2 in W, 1.09 in H
M/C LT DBL BULLS-EYE RED 4X2IN
Peterson V413 Double Wire Flush Mount Combination Tail Light
ID BAR LT LED RED 14.25X1.19IN
PM Marker/Clearance Light, Double Bulls-Eye, Rectangular, 9 to 32 V, Lamp Type: LED, Lens Color: Red, Surface Mounting, 2 in W, 1.09 in H Sturdy plastic housing with a black finish. Brass socket and lexide lens gasket for long life. 5-1/2 in face Dia, 4-1/2 in Dia inset and 1-1/2 in D overall. PM Submersible Light Bar, LED Lamp, Stainless Steel, Red, 14-1/4 in Length, Includes: Mounting Hardware
DOME/INT LIGHT LED RECT MV WHT
BACK-UP LIGHT KIT LED OVAL WHT TURN SIG LT LED AMB 6.25X2.25
PM Interior Light, 9/32 V, Number of Lamps: 9, Lamp Type: LED, Housing Material: Plastic, Housing Color: White, Surface Mounting, Dimensions: 5.83 in L x 0.79 in W x 2.8 in H, Includes: Lead and Ground Wires PM LumenX Back-Up Light, 9 to 16 V, Lamp Type: LED, Number of Lamps: 7, Light Color: White, Lens Shape: Oval, Lens Color: Clear, Grommet Mounting, 6-1/2 in L, 1.62 in W, 2.31 in H, Includes: Light, Grommet and 421-49 Plug PM LumenX Turn Signal Light, 12 V, Lamp Type: LED, Number of Lamps: 7, Light Color: Amber, Grommet Mounting, 6-1/2 in L, 1.62 in W, 2.31 in H, Includes: Grommet and 421-491 Plug
Peterson V507 Implement Flush Mount Tractor Light S/T/T LIGHT KIT LED OVAL RED  ID BAR LT LED RED 16.27X1.25IN
Par-36 sealed beam cushioned by durable, molded, weatherproof housing from road shock and vibration, snaps in for fast, easy service. Universal 5/16 in stud and adjustable, zinc-plated bracket allow mounting in any position. 10 in lead wire exits through housing back. Uses No.4411 beam for trapezoid pattern. PM LumenX Turn Signal Light, 12 V, Lamp Type: LED, Number of Lamps: 7, Light Color: Red, Flange Mounting, 7.88 in L, 1.62 in W, 3.63 in H, Includes: 421-491 Plug PM Light Bar, 9 to 16 V, LED Lamp, Red, Includes: Mounting Gasket
BACK-UP LIGHT KIT LED RND WHT Peterson V502 Utility Halogen Low Profile Tractor Light Piranha V423 LED Surface Mount Combination Tail Light
PM LumenX Back-Up Light, 12 V, Number of Lamps: 7, Lamp Type: LED, Lamp Color: Clear, Housing Color: Black, Grommet Mounting, Dimensions: 4.25 in L x 1.62 in W x 4.25 in H, Includes: Grommet and 431-49 Plug Low-profile lamp functions as tractor or utility light with bright 55 W, H3 replaceable bulb. Features high-impact polycarbonate housing and adjustable stainless steel mounting hardware. Kit with decorative snap-on chrome bezel included. Hard-wired design eliminates the need for separate plug and reduces connection points. Designed for horizontal installation. 9 to 16 V operating range. Meets FMVSS 108 requirements.
Peterson V540 Trailer Light Kit Peterson V840L LED Submersible Combination Tail Light Peterson V840 LED Submersible Combination Tail Light
Provides all legal lighting and reflective equipment for any trailer less than 80 in W. Combination lights, of tough molded housing and lenses with phosphor bronze contacts for durability, exceed DOT requirements for stop, turn, tail, rear and side reflector, side marker and license illuminator. Side marker light has built-in reflector optics. Includes No.440 stop and tail combination lights, 2 No.114A side marker lights, 20 ft wire harness, 48 in trunk connector, license bracket, all mounting hardware and installation instructions. Solid state construction, no bulbs to break or burn out. 100,000 hrs rated life. Fully sealed, submersible construction. Potted circuitry(coated and sealed) protects against moisture, corrosion and vibration. Lower amp draw than incandescent lights. Designed to directly replace 440-Series incandescent lights. Integral, dedicated side marker diode. Exceeds all DOT rear lighting and reflex requirements for trailers less than 80 in wide. 4-1/2 in W x 4-1/2 in H x 2 in D. Solid state construction, no bulbs to break or burn out. 100,000 hrs rated life. Fully sealed, submersible construction. Potted circuitry(coated and sealed) protects against moisture, corrosion and vibration. Lower amp draw than incandescent lights. Designed to directly replace 440-Series incandescent lights. Integral, dedicated side marker diode. Exceeds all DOT rear lighting and reflex requirements for trailers less than 80 in wide. 4-1/2 in W x 4-1/2 in H x 2 in D.
INTR LIGHT LED OBLONG ROT WHT Peterson V544 Submersible Rear Trailer Light Kit WORK LT LED WHT 500LM 3X3IN MV
PM Great White Rotating Interior Light with Switch, 12 V, 24 Lamps, LED Lamp, White Lamp, Plastic Housing Material, White Housing, Dimensions: 1.06 in H x 11.73 in W x 0.98 in D Tough molded housing and lenses with phosphor bronze contacts for durability. Belljar design, gasketed lenses prevent water from reaching bulbs and contacts. Use as a rear light for over 80 in wide applications. Exceeds DOT requirements for stop, turn, tail, rear and side reflector, side marker and rear clearance. Includes No.452 Belljar submersible lights, 25 ft trailer harness, 48 in trunk connector, plastic license bracket, all mounting hardware and installation instructions. Front side marker lights and reflectors needed to meet DOT requirements. PM Square Work Light, 12/24 V, 0.4, 0.21 A, Lamp Type: LED, Number of Lamps: 6, Light Color: White, Lens Type: Rugged Textured, Lumens: 500 Lumens, IP Rating: IP67, Stud Mounting, Polymer, Dimensions: 3 in L x 1.39 in W x 4.49 in H
S/T/T & SM LT KIT LED RECT RED S/T/T & SM LIGHT LED RECT RED HAZARD LIGHT LED BO RECT AMBER
PM 844 Tail Light, Combination, 9 to 16 V, Lamp Type: LED, Light Color: Red, Bolt-On Mounting, Housing Color: Red, 5.38 in L, 1.8 in W, 4.61 in H PM 844 Tail Light, Combination, 9 to 16 V, Lamp Type: LED, Light Color: Red, Bolt-On Mounting, Housing Color: Red, 5.38 in L, 4.61 in W, 4.61 in H PM Flashing Hazard Light, Battery Type: Alkaline, Battery Voltage: 12 V, Flash Rate: 180 fpm, 6.3 in L, 1.9 in W, 3.95 in H, Amber, Magnet Mounting
HAZARD LIGHT LED BO RECT RED  Peterson V555 Auxiliary Tow Light Kit Peterson V773 Alternating Strobe Action Flashing Light
PM Flashing Hazard Light, Battery Type: Alkaline, Battery Voltage: 12 V, Flash Rate: 180 fpm, 6.3 in L, 1.9 in W, 3.95 in H, Red, Magnet Mounting Two auxiliary warning lights with magnetic bases. Kit includes trunk harness, 20 ft four-wire harness, connectors and instructions. Plugs into standard flat four-way vehicle trailer light connector. Provides alternating strobe-like action with 90 flashes per minute. Includes three powerful magnets on base for secure mounting and 12 ft coiled cord with cigarette lighter plug.
Peterson V445 Stud Mount Combination Tail Light FLASHING BEACON LED MAG MT AMB WORK LT LED WHT 1350LM 4IN MV
Features three 1/4 in mounting studs on 2 in triangular pattern. Includes stop, turn, tail, back-up and license light functions. Will fit Peterbilt, Mack, White and Jeep. 6-1/4 in W x 6-3/4 in H x 2-3/4 in D overall. PM 772 Flashing Beacon Light, 9 to 16 V Supply, LED Lamp, Amber Lens, 90 fpm Flash, Magnet Mounting, Plastic Housing Material, Dimensions: 4.63 in W x 5.5 in H PM Great White Round Work Light, 13.5/28 V, 1.2, 0.59 A, Lamp Type: LED, Number of Lamps: 9, Light Color: White, Lumens: 1350 Lumens, IP Rating: IP67, IP69K, Temperature Rating: -40 to 65 deg C, Stud Mounting, Aluminum, Black, Dimensions: 4.2 in Dia x 1.58 in W x 5.25 in H
S/T/T & SM LIGHT LED RECT RED WORK LT LED WHT 1000L 3X5IN MV WORK LIGHT LED WHITE 800LM 4IN
PM Tail Light with License Light, Combination, LED Lamp, Red Light, 100,000 hr Average Life, 7.94 in Length, 2.88 in Width, 2.88 in Height, Includes: Carriage Mounting Bolts PM Rectangular Work Light, 12/24 V, 0.81, 0.41 A, Lamp Type: LED, Number of Lamps: 12, Light Color: White, Lens Type: Rugged Textured, Lumens: 1000 Lumens, IP Rating: IP67, Stud Mounting, Polymer, Dimensions: 5.63 in L x 1.39 in W x 5.08 in H PM Round Work Light, 12 V, 0.65 A, Lamp Type: LED, Number of Lamps: 9, Light Color: White, Lumens: 800 Lumens, Pedestal, Stud Mounting, Rubber, Dimensions: 4.85 in Dia x 5.9 in H
Channel Cat V547 Submersible Rear Trailer Light Kit WORK LT LED WHT 1350LM 4.29 MV STROBE LT LED BO AMB 3.95X6.3
Provides rear lighting and reflectors for trailers. Lights feature easy maintenance and bulb replacement while maintaining gasket seal and grounding through a separate lead wire. Includes 2 low-profile, submersible combination taillights (1 with license light) that mount on slide-on 2 in centers, 25 ft trailer harness, 48 in trunk connector, license bracket, mounting hardware and installation instructions. Front sidemarker/clearance lights, side reflectors and rear identification lights are necessary to meet all DOT requirements. PM Great White Square Work Light, 13.5/28 V, 1.2, 0.59 A, Lamp Type: LED, Number of Lamps: 9, Light Color: White, Lumens: 1350 Lumens, IP Rating: IP67, IP69K, Temperature Rating: -40 to 65 deg C, Stud Mounting, Aluminum, Black, Dimensions: 3.94 in L x 1.57 in W x 8.03 in H PM Strobe Light, Power Source: Battery, Lamp Type: LED, Lens Color: Amber, Flash Type: Single, Flash Rate: 65 fpm, Magnetic Mounting, Dimensions: 3.9 in H x 5.3 in W x 3.9 in D, Includes: Carry Strap