|
|
|
|
|
|
|
|
|
|
|
|
|
|
Designed to keep low-flow watering lines where you want them. Holds 1/2 in, 5/8 in or 0.710 in lines in place. Plastic stakes have an exclusive cleated design to hold lines securely in place.
|
Convert existing 1/2 in underground sprinkler systems to low flow watering where a drip circuit can't be set up. Adjustable bubblers are available in stream spray with a maximum spray diameter of 3 ft at 30 psi or for finer water droplets, a fan spray, with spray diameter up to 13 ft at 30 psi. Bubbler flow rates are adjustable from 0 to 13 gph at 30 psi for stream type and from 0 to 24 gph at 30 psi for the fan spray. These features allow the higher flow rates required when watering large and small plants on the same circuit.
|
Convert existing 1/2 in underground sprinkler systems to low flow watering where a drip circuit can't be set up. Adjustable bubblers are available in stream spray with a maximum spray diameter of 3 ft at 30 psi or for finer water droplets, a fan spray, with spray diameter up to 13 ft at 30 psi. Bubbler flow rates are adjustable from 0 to 13 gph at 30 psi for stream type and from 0 to 24 gph at 30 psi for the fan spray. These features allow the higher flow rates required when watering large and small plants on the same circuit.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Join or connect two lengths of line. Made from ABS. For water pressure up to 60 psi. Ends are color coded for easy size identification. 5/8 in compression coupling for use with 5/8 in (0.69 to 0.7 in OD) hose only.
|
Rain Bird Stake, 6-3/4 in Length, Plastic, Black, Suitable for: 1/2 in Poly Tubing
|
Heavy-duty 13 in stake with adjustable 8 in rigid riser for use with low-flow sprinklers and spray heads with 10-32 NFT inlets. Just screw the sprinkler/sprayer into the rigid riser moving it up or down to water above plants. Constructed of high-density polyethylene and polypropylene.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Rain Bird Hole Punch, Plastic, Black, Suitable for: Drippers, 1/4 in Fittings
|
Preassembled riser and stake for use with Rain Bird 10 - 32 threaded emission devices.
|
Made from ABS. For water pressure up to 60 psi. Ends are color-coded for easy size identification. For use with 5/8 in (0.690 - 0.700 in OD) hose only.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Close off ends and flush hose. Made from ABS. For water pressure up to 60 psi. Closes ends of 5/8 in (0.690 to 0.700 in OD) poly hose when frequent flushing is necessary.
|
For use with 5/8 in (0.690 to 0.700 in OD) hose only.
|
Spray wetted radius up to 6 ft at 29 psi. Includes 13 in green stake with 8 in adjustable riser and 1/4 in barbed adapter. Non-adjustable. Attach one end of 1/4 in tubing to barbed adapter and the other end to 1/2 to 0.71 in hose.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Made from ABS. For water pressure up to 60 psi. Ends are color-coded for easy size identification. For use with 1/2 in (0.620 to 0.630 in OD) hose only.
|
Made from ABS. For water pressure up to 60 psi. Ends are color-coded for easy identification. For use with 1/2 in (0.620 to 0.630 in OD) hose only.
|
The Rain Bird EC50 1/2 in end closure is used to close a drip line system without the need of cutting the tubing which can later on be used to extend your irrigation system. Used with 1/2 in tubing or 1/2 in emitter tubing to allow for easy flushing and draining of the system.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Join or connect two lengths of line. Made from ABS. For water pressure up to 60 psi. Ends are color coded for easy size identification. 1/2 in compression coupling for use with 1/2 in (0.62 to 0.63 in OD) hose only.
|
Compression fitting for use with all 1/2 in drip tubing brands.
|
For use with 5/8 in (0.69 to 0.7 in OD) hose only. Connects 5/8 in poly hose to 3/4 in male pipe thread. Washer included.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Designed to keep low-flowing watering lines where you want them. For fastening 1/2 to 5/8 in hose to posts, beams, decks, patios and walls.
|
Compression fitting for use with all 1/2 in drip tubing brands.
|
For use with 1/2 in (0.62 in to 0.63 in) hose only. Connects 1/2 in poly hose to 3/4 in male pipe thread. Includes washer. 3/4 in pipe thread swivel x 1/2 in compression adaptor.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Rain Bird Drip Irrigation Adapter, 1/2 in Connection, Male x Barb Connection, PVC, Brown, 0 to 60 psi
|
This 1 port manifold continues to be the number one choice by homeowners. This versatile manifold includes an easy access filter to prevent clogging and allows you to add drip watering to an existing shrub head.
|
For use with 5/8 in (0.690 to 0.700 in OD) hose only. Compression inlet/outlet shut-off for 5/8 in hose. For water pressure up to 60 psi.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Rain Bird Staked Riser, Adjustable, 18 in Length, Poly, Black, Suitable for: 1/4 in Threaded Drippers and Micro Sprays
|
Used to attach 1/4 in vinyl distribution tubing to wood without pinching the tube.
|
Connects Raindrip low-flow sprinklers to 1/2 in MPT sprinkler risers. 1/2 in FPT inlet. 10-32 FNFT outlet. Includes filter washer.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Unique design accommodates a range of hose diameters and will not blow off hose with water pressures up to 100 psi. For use with 1/2 to 0.710 in (0.520 to 0.620 in ID) hose.
|
Universal compression fitting tee for use with all 1/2 in drip tubing brands.
|
Unique design accommodates a range of hose diameters and will not blow off hose with water pressures up to 100 psi. For use with 1/2 to 0.710 in (0.520 to 0.620 in ID) hose.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Unique design accommodates a range of hose diameters and will not blow off hose with water pressures up to 100 psi. For use with 1/2 to 0.710 in (0.520 to 0.620 in ID) hose.
|
Used to shut-off the end of 1/4 in tubing. Removes easily.
|
Rain Bird Flush Cap Hose Plug, Universal, 1/2, 5/8 in Connection, Compression Connection, Plastic, Suitable for: 1/2 in or 5/8 in Poly Drip Tubing
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Black poly clamps molded to fit 1/4 in tubing. Includes pre-inserted nail.
|
Double-ended, double-duty plugs seal either large or small holes in 1/2 in, 5/8 in or 0.71 in hose.
|
Rain Bird Drip Irrigation Adapter, 3/4 in x 1/2 in and 5/8 in Connection, FPT x Tube Connection, Polyethylene, Black, 40 psi Pressure, Suitable for: 1/2 to 5/8 in Tubing
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Connects 1/4 in tubing to existing 1/2 in MPT underground sprinkler riser. 1/2 in FPT Inlet. 1/4 in compression and 1/2 in MPT outlet. Includes filter washer.
|
For use with 1/2 in (0.62 to 0.63 in OD) hose only. Connects 1/2 in poly hose to faucet or other 3/4 in male hose thread. Includes filter washer. 3/4 in hose thread swivel x 1/2 in compression adaptor.
|
3/4 in pipe thread swivel x 1/2 in compression adaptor connects 1/2 in poly hose to 3/4 in male pipe thread. Washer included. For use with 1/2 in (0.62 to 0.63 in OD) hose only. Green compression ring.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Rain Bird Drip Irrigation Adapter, 3/4 x 1/4 in Connection, FHT x Tube Connection, Plastic, Black, 40 psi Pressure, Suitable for: 3/4 in Male Threaded Pipe Components
|
Stake 1/4 in tubing at desired locations or secure spot watering emitters. Place bug guard at end to prevent bugs and debris from clogging tubing.
|
For use with 1/4 in (0.16 in I.D.) tube only. Connects 1/4 in tubing to faucet or other 3/4 in male hose thread. Includes filter washer.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Swivel adaptors join tubing to threaded adaptor. For use with 1/4 in (0.245 in OD) tube only. Connects 1/4 in vinyl tubing to 3/4 in male pipe thread. R326CT/R326CB includes washer. 3/4 in pipe threaded swivel x 1/4 in compression adaptor.
|
3/4 in hose thread swivel x 1/2 in compression adaptor connects 1/2 in poly hose to faucet or other 3/4 in male hose thread. Includes filter washer. For use with 1/2 in (0.62 in to 0.630 in OD) hose only. Green compression ring.
|
Converts sprinkler risers to two 1/4 in drip lines. Inlet is 1/2 in FPT. Outlet is 1/4 in barbed tee.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For use with 5/8 in (0.690 to 0.7 in OD) hose only. Connects 5/8 in poly hose to faucet or other 3/4 in male hose thread. Includes filter washer. Black compression ring.
|
This valve easily adjusts or shuts off flow in 1/4 in drip tubing runs to different sections of your plant watering area. Avoid over or under-watering of plants with different moisture needs in a timed drip zone. Barbed ends permit easy, leak-free insertion into drip tubing. Top cap turns to adjust or completely shut-off water flow, ideal for use when making repairs. Constructed of high quality, long-lasting UV resistant materials.
|
Ideal for shrub plantings, trees, containers and flower beds.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Ideal for shrub plantings, trees, containers and flower beds.
|
Connects to 1/2 in female threaded pipe fittings. Two 1/4 in barbed ports with threaded caps. Includes an easy access filter to prevent clogged nozzles.
|
4 in plastic stakes hold 1/4 in tubing in place next to plants.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Raindrip Flag Dripper, 40 psi, 2 gph gph, Tubing Size: 1/4, 1/2 in, Green
|
Raindrip Flag Dripper, 40 psi, 4 gph gph, Tubing Size: 1/4, 1/2 in, Yellow
|
Use as an end closure for 1/4 in tubing or as a side plug for 1/2 in tubing.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Double barbed design, allows use with higher pressures, join or connect two lengths of line. 1/4 in connector used with 1/4 in (0.160 to 0.197 in ID) tube only. Double barb design allows water pressures up to 50 psi.
|
Rain Bird Fan Micro Spray, Riser Mount, Part-Circle, 70 psi Operating, 0 to 31 gph Flow Rate, 0 to 10 ft Coverage Diameter, Black, Plastic Base, Includes: (2) Fan Micro Sprays
|
Connect 2 pieces of 1/2 in tubing.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Heavy-duty plastic stakes hold 1/4 in lines in place.
|
Double barbed design allows water pressure up to 50 psi.
|
Closes of ends and flush hose. Made from ABS. For water pressure up to 60 psi. Closes ends of 5/8. (0.690 to 0.700 in OD) poly hose when frequent flushing is necessary.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Closes ends of 1/2 in (0.620 to 0.630 in OD) poly hose when frequent flushing is necessary. Green compression ring. Made from ABS. For water pressure up to 60 psi.
|
Riser adapter for drip and sprinkler watering allows both irrigation methods to be used at once, covering all plants effectively.
|
Double barbed design allows use with higher water pressures. For use with 1/4 in (0.160 to 0.197 in ID) tube only. Creates a 1/4 in branch from a 1/4 in tube or two 1/4 in branches from a 1/2 in hose. For water pressures up to 50 psi.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Used to shut-off the end of 1/2 in rain drip poly hose. Removes easily.
|
For use with 1/2 in (0.620 to 0.630 in OD) hose only. Washer included. 3/4 in pipe thread swivel x 1/2 in compression tee.
|
Rain Bird Spiked Tee, Easy-Fit, Universal, 1/2 in Connection, FPT Connection, Plastic, Black, 30 psi Pressure, Suitable for: 1/2 to 5/8 in Tubing
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Rain Bird Mister, Threaded, Specifications: 0 to 31 gph Flow Rate, 10 to 30 psi Operating Pressure, 10-32 Threaded Inlet Type, 0 to 1-1/2 in Throw Radius, Plastic, Black
|
Apply drip watering efficiency in more places around your landscaping with this versatile staked riser with adjustable micro spray flow and height. The riser adjusts up to 18 in H and the spray adjusts from 0 to 10 ft throw, allowing you to direct water exactly where you need it in a wide variety of planting areas. It is ideal for taller plants such as shrubs and bushes well as for use in flower beds and ground cover where you may want broader coverage. Includes a sturdy 8 in stake plus 36 in L of 1/4 in tubing with barbed fitting for quick attachment to 1/2 in drip irrigation tubing.
|
Apply drip watering efficiency in more places around your landscaping with this versatile staked riser with adjustable micro spray flow and height. The riser adjusts up to 18 in H and the spray adjusts from 0 to 10 ft throw, allowing you to direct water exactly where you need it in a wide variety of planting areas. It is ideal for taller plants such as shrubs and bushes well as for use in flower beds and ground cover where you may want broader coverage. Includes a sturdy 8 in stake plus 36 in L of 1/4 in tubing with barbed fitting for quick attachment to 1/2 in drip irrigation tubing.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Join or connect two lengths hose. Made from ABS. For water pressure up to 60 psi.
|
Easily adjust or shut off flow in 1/2 in or 5/8 in drip tubing runs to different sections of your plant watering area. Avoid over- or under-watering of plants with different moisture needs in the zone. Top cap turns to adjust flow. Barbed ends permit easy, leak-free insertion into drip tubing.
|
Join or connect two lengths of line. Exclusive double barbed design allows use with higher water pressures. For use with 1/4 ft (0.16 in ID) tube only. Design allows water pressures up to 50 psi.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Used to adapt connections to a water source. Connects 3/4 in male pipe thread to 3/4 in male hose thread. Use with R605DT.
|
Designed for comfortable use, punches holes in 1/2 in, 5/8 in or 0.710 in hose to insert PC drippers or 1/4 in fittings. Handle has socket for installing and removing Micro spray jets. Card includes hole plugs.
|
Rain Bird Mister Spray, 1/4 in Connection, Barb Connection, Spray Pattern: Full-Circle, Mist, 360 deg Spray Angle, 0 to 6 gph Flow Rate, Plastic, Black, Dimensions: 12 x 1/4 x 1/4 in
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Connect 2 pieces of 1/2 in tubing in an "L" shape.
|
Connect 3 pieces of 1/2 in tubing in a "T" shape.
|
Double-ended, double-duty plugs seal either large or small holes in 1/2 in, 5/8 in or 0.710 in hose.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For water pressure up to 60 psi. Ends are color-coded for easy size identification.
|
Easy to install, remove and reuse. UV resistant and durable. High manufacturing control standards. Pressure compensating. Built in dust cap for protection from debris and insects. Blue Stripe drip NGE 1.0 emitters are perfect for watering individual plants. Color-coded emitters for easy identification.
|
Connect 3 pieces of 1/4 in tubing in a "T" shape or tap into the side of 1/2 in tubing.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Four 1/4 in barbed ports with threaded caps. Adds drip watering to an existing shrub head. Includes easy access filter. Connects to a 1/2 in threaded riser.
|
Heavy-duty 13 in stake with adjustable 8 in rigid riser for use with low-flow sprinklers and spray heads with 10-32 NFT inlets. Just screw the sprinkler/sprayer into the rigid riser moving it up or down to water above plants. Constructed of high-density polyethylene and polypropylene.
|
Rain Bird Drip Irrigation Tee with FHT Adapter, Universal, 3/4 x 1/2 in Connection, FHT x Compression Connection, Polyethylene, Black, 0 to 60 psi Pressure, Suitable for: 1/2 in End Closure, 3/4 in x 1/2 in FHT x MTH Adapter, 1/2 to 5/8 in Tubing
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Used to join hose to 1/2 in tubing to 1/2 in PVC or pipe.
|
Apply drip watering efficiency in more places around your landscaping with this versatile staked riser with adjustable micro spray flow and height. The riser adjusts up to 18 in H and the spray adjusts from 0 to 10 ft throw, allowing you to direct water exactly where you need it in a wide variety of planting areas. It is ideal for taller plants such as shrubs and bushes well as for use in flower beds and ground cover where you may want broader coverage. Includes a sturdy 8 in stake plus 36 in L of 1/4 in tubing with barbed fitting for quick attachment to 1/2 in drip irrigation tubing.
|
For use with 1/4 in (0.160 in ID) tube only. Exclusive double barb design allows water pressures up to 50 psi.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Holds 1/2, 5/8 or 0.710 in lines in place. 11 ga steel. Easy to bend. Packed in clear plastic tube.
|
Drip watering bubbler. Adjustable bubbler rotates easily to preferred water flow - from full coverage for shrubs and large potted trees to shut-off position.
|
Easy to install, remove and reuse. UV resistant and durable. High manufacturing control standards. Patented Loc-Eze design. Fittings grip tighter as tension increases. Use blue stripe drip 1/2 in fittings to connect 1/2 in hose. Require no glue or clamps.
|
|
|
VIEW MAP & PHOTO GALLERY | CALL US: 406-466-3100
