|
|
|
|
|
|
|
|
|
|
|
|
|
|
Safety Works Disposal Roof Anchor, Specifications: 310 lb Capacity, Steel, Includes: Nail
|
A versatile product that works well as an inexpensive anchor solution. As a disposable anchor point, it can be used in other applications such as wood framing members, rebar, pipe racking and more. Their loop ends are ideal for use where a metal D-ring could damage glass or other fragile materials. They must, however, always be anchored to a structure capable of supporting 5000 lb.
|
The Guardian Fall Protection temper anchor is designed for use on wood, steel and concrete substrates. It can fit all roof pitches from flat to sheer, is composed of thick plated steel for longer lasting product life and is ideal for fall arrest and restraint applications. This anchorage connector can be installed with either screws or nails (depending on roof pitch) and its designed offset holes down the center help keep the truss from splitting. Supplied with all necessary fasteners (always use new fasteners for each new installation application).
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Qualcraft Industries Ridge-It Single D-Ring Roof Anchor, Stainless Steel, Dimensions: 9-3/4 in L, Includes: Nails
|
The Guardian Fall Protection Ridge-It anchor line is designed for use on wood rooftops. This Ridge-It model RIDG-1 is manufactured with a D-ring on one end and is 9-3/4 in L, while the RIDG-2 is manufactured with two D-ring ends and is 18 in L. Ridge-It anchors are composed highly durable stainless steel and zinc plated steel and are compliant with all applicable OSHA regulations. Ridge-It anchors are easy to install and are ideal for both residential construction and maintenance work.
|
Guardian Fall Protection double-locking carabiners (made from either steel or aluminum) are specially designed to be both supremely durable and easy to use. The gate is certified to withstand loads up to 3600 lb is self-closing and self-locking and can be opened with just one hand.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Safety Works Vertical Rope Lifeline, 352 lb Weight, 5004 lb Tensile Strength, Line Material: Polyester, Line Length: 25 ft, Line Width: 16 mm
|
Redesigned from the ground up, the Guardian Series 1 full body harness is the perfect entry level harness solution and is ideal for outfitting large crews, roofing, contracting, general industry and much more. Series 1 harnesses feature durable water repellent, contrasting core webbing that makes any damage easy to see, greatly improving the inspection process. Webbing ends are folded and stitched with rubber tabs for durability and rubber web keepers prevent loose straps from interfering with your work. Dual lanyard keepers safely store unused lanyard legs and the two-bar torso adjusters make fitting the harness fast and precise. Available with or without side D-rings and with quick-connect, pass-through or tongue and grommet buckles.
|
Redesigned from the ground up, the Guardian Series 1 full body harness is the perfect entry level harness solution and is ideal for outfitting large crews, roofing, contracting, general industry and much more. Series 1 harnesses feature durable water repellent, contrasting core webbing that makes any damage easy to see, greatly improving the inspection process. Webbing ends are folded and stitched with rubber tabs for durability and rubber web keepers prevent loose straps from interfering with your work. Dual lanyard keepers safely store unused lanyard legs and the two-bar torso adjusters make fitting the harness fast and precise. Available with or without side D-rings and with quick-connect, pass-through or tongue and grommet buckles.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Redesigned from the ground up, the Guardian Series 1 full body harness is the perfect entry level harness solution and is ideal for outfitting large crews, roofing, contracting, general industry and much more. Series 1 harnesses feature durable water repellent, contrasting core webbing that makes any damage easy to see, greatly improving the inspection process. Webbing ends are folded and stitched with rubber tabs for durability and rubber web keepers prevent loose straps from interfering with your work. Dual lanyard keepers safely store unused lanyard legs and the two-bar torso adjusters make fitting the harness fast and precise. Available with or without side D-rings and with quick-connect, pass-through or tongue and grommet buckles.
|
The shock absorbing lanyard is the premiere free fall lanyard offered by Guardian Fall Protection. It meets all the stringent ANSI Z359.13-2013 regulations and the integrated shock absorbing component limits average arresting forces to 900 lb or less. It is comprised of 1 in nylon webbing and is available in a variety of lengths and connector options, including steel and aluminum snap hooks and rebar hooks, all of which make it one of the most functional and durable lanyards on the market.
|
Redesigned from the ground up, the Guardian Series 1 full body harness is the perfect entry level harness solution and is ideal for outfitting large crews, roofing, contracting, general industry and much more. Series 1 harnesses feature durable water repellent, contrasting core webbing that makes any damage easy to see, greatly improving the inspection process. Webbing ends are folded and stitched with rubber tabs for durability and rubber web keepers prevent loose straps from interfering with your work. Dual lanyard keepers safely store unused lanyard legs and the two-bar torso adjusters make fitting the harness fast and precise. Available with or without side D-rings and with quick-connect, pass-through or tongue and grommet buckles.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Guardian Fall Protection truss boss anchor kit provides everything required for the set-up of a premium roof truss anchor. In addition to a non-corrosive truss boss anchor, this kit also includes waterproof flashing for both composite and tile roofs and also an anchor cap specially designed to protect the truss boss from weather, as well as to not blow off in high winds. The included truss boss can be installed on the truss while the truss is still on the ground for additional safety and the entire kit can be installed without penetrating roof sheathing. This kit is ideal for fall arrest and restraint applications and is supplied with all necessary fasteners.
|
Made with heavy-duty outer polyester webbing and a polyester core specifically sewn in to reduce impact forces. Does not stretch and has no shock pack, lightweight.
|
Our lifelines and rope grab kits are a practical solution for many fall arrest applications. Our Rope Grab is equipped with a panic lock feature as well as an orientation lock out feature that will not allow the rope grab to be installed upside down. All of our Vertical rope lifelines and rope grabs combinations meet and exceed ANSI, OSHA and CSA certified. This lanyard is specifically designed for fall arrest purposes for workers weighing between 60 kg (132 lb) to 160 kg (352 lb).
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Safety Works Hybrid Econo Harness, 400 lb Weight, 6000 lb Tensile Strength, Webbing Material: Polyester, Black/Gray, Number of Anchor Points: 5, D-Ring Locations: Back
|
The shock absorbing lanyard is the premiere free fall lanyard offered by Qualcraft Industries. It meets all the stringent ANSI Z359.13-2009 regulations and the integrated shock absorbing component limits average arresting forces to 900 lb or less. It is comprised of 1 in nylon webbing and is available in a variety of lengths and connector options, including steel and aluminum snap hooks and rebar hooks, all of which make it one of the most functional and durable lanyards on the market.
|
This lanyard is specifically designed for fall arrest purposes for workers weighing between 60 kg (132 lb) to 160 kg (352 lb). With many hardware options and webbing types, it will provide you with the best option to best suit your specific application. It is very important for the user to calculate the fall clearance requirement when using a lanyard with an energy absorber.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Ideal for work in tight spaces or around machinery, since its stretching capability helps reduce hazards of tripping or catching on moving parts. The lanyard stretches from between 4-1/2 to 6 ft and is available in a variety of connector options. Lightweight and its unique design eliminates the need for an external shock absorber.
|
The ladder stability anchor functions to clamp to a roof and then secure to the top rung of a ladder with either 2 or 3 ft long Velcro straps, ensuring that the ladder will not fall or move. It is composed of lightweight aluminum for superior durability and requires no special tools to install. The ladder stability anchor shall be secured at its top to a rigid support that will not deflect.
|
Qualcraft Industries Disposable Snappy Anchor, Stainless Steel, Includes: Nails
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Safety Works Automatic Sliding Rope Grab, Harness Hook Opening Size: 5/8 in, Hook Material: Steel, Line Material: Polyester, Extended Fall Length: 2 ft
|
Expanding upon the wide array of features offered by the Series 1, the Guardian Series 3 full body harness offers the worker at height an extra measure of comfort and performance. Series 3 harnesses feature durable water repellant, contrasting core webbing that makes any damage easy to see, greatly improving the inspection process. Snap-on shoulder pads increase comfort and are removable for washing. The SRL connector loop allows you to mount a personal SRL while keeping the D-ring free for incidental tie-offs. An available waist belt is articulated for an ergonomic fit, helping to support heavy tools or just providing extra support for a long day's work and the laminated waist belt will not fold during use. Webbing ends are folded and stitched with rubber tabs for durability and rubber web keepers prevent loose straps from interfering with your work. Dual lanyard keepers safely store unused lanyard legs and the spring loaded torso adjusters make fitting the harness fast and precise. Available with or without side, shoulder or sternal D-rings and with quick-connect, pass-through or tongue and grommet buckles.
|
The Guardian Fall Protection poly steel rope is ideal for high-moisture environments. Nylon rope, when wet, will typically reduce in strength by between 10 to 15%, but unlike nylon, poly steel rope does not absorb water, so will not diminish in strength in wet conditions. This rope is also particularly strong when it comes to resisting damage from ultraviolet light and its synthetic composition makes it especially resistant to cuts and abrasion, thereby increasing equipment lifetime. Poly steel is ten times stronger than polypropylene and while it may become fibrous, this is just a result of normal wear and does not indicate it needs to be replaced. It is 5/8 in THK and is available with a variety of component configurations, including a shock absorber, positioning device, 18 in extension lanyard and two double locking snap hooks.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Expanding upon the wide array of features offered by the Series 1, the Guardian Series 3 full body harness offers the worker at height an extra measure of comfort and performance. Series 3 harnesses feature durable water repellant, contrasting core webbing that makes any damage easy to see, greatly improving the inspection process. Snap-on shoulder pads increase comfort and are removable for washing. The SRL connector loop allows you to mount a personal SRL while keeping the D-ring free for incidental tie-offs. An available waist belt is articulated for an ergonomic fit, helping to support heavy tools or just providing extra support for a long day's work and the laminated waist belt will not fold during use. Webbing ends are folded and stitched with rubber tabs for durability and rubber web keepers prevent loose straps from interfering with your work. Dual lanyard keepers safely store unused lanyard legs and the spring loaded torso adjusters make fitting the harness fast and precise. Available with or without side, shoulder or sternal D-rings and with quick-connect, pass-through or tongue and grommet buckles.
|
Ideal for positioning and restraint situations. Can be quickly adjusted from 4 to 6 ft L. Comes with a shock absorber.
|
Expanding upon the wide array of features offered by the Series 1, the Guardian Series 3 full body harness offers the worker at height an extra measure of comfort and performance. Series 3 harnesses feature durable water repellant, contrasting core webbing that makes any damage easy to see, greatly improving the inspection process. Snap-on shoulder pads increase comfort and are removable for washing. The SRL connector loop allows you to mount a personal SRL while keeping the D-ring free for incidental tie-offs. An available waist belt is articulated for an ergonomic fit, helping to support heavy tools or just providing extra support for a long day's work and the laminated waist belt will not fold during use. Webbing ends are folded and stitched with rubber tabs for durability and rubber web keepers prevent loose straps from interfering with your work. Dual lanyard keepers safely store unused lanyard legs and the spring loaded torso adjusters make fitting the harness fast and precise. Available with or without side, shoulder or sternal D-rings and with quick-connect, pass-through or tongue and grommet buckles.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Expanding upon the wide array of features offered by the Series 1, the Guardian Series 3 full body harness offers the worker at height an extra measure of comfort and performance. Series 3 harnesses feature durable water repellant, contrasting core webbing that makes any damage easy to see, greatly improving the inspection process. Snap-on shoulder pads increase comfort and are removable for washing. The SRL connector loop allows you to mount a personal SRL while keeping the D-ring free for incidental tie-offs. An available waist belt is articulated for an ergonomic fit, helping to support heavy tools or just providing extra support for a long day's work and the laminated waist belt will not fold during use. Webbing ends are folded and stitched with rubber tabs for durability and rubber web keepers prevent loose straps from interfering with your work. Dual lanyard keepers safely store unused lanyard legs and the spring loaded torso adjusters make fitting the harness fast and precise. Available with or without side, shoulder or sternal D-rings and with quick-connect, pass-through or tongue and grommet buckles.
|
The Guardian Fall Protection poly steel rope is ideal for high-moisture environments. Nylon rope, when wet, will typically reduce in strength by between 10 to 15%, but unlike nylon, poly steel rope does not absorb water, so will not diminish in strength in wet conditions. This rope is also particularly strong when it comes to resisting damage from ultraviolet light and its synthetic composition makes it especially resistant to cuts and abrasion, thereby increasing equipment lifetime. Poly steel is ten times stronger than polypropylene and while it may become fibrous, this is just a result of normal wear and does not indicate it needs to be replaced. It is 5/8 in THK and is available with a variety of component configurations, including a shock absorber, positioning device, 18 in extension lanyard and two double locking snap hooks.
|
Qualcraft Removable Rope Grab Without Extension
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Includes a universal fit harness HUV (01101) with an attached 6 ft internal shock lanyard (Sku 639.7582) and a heavy-duty ballistic nylon bag with Velcro closure (00762). The grommets on the bag allow for you to attach the bag to a lift basket.
|
The Lil' bucket of safe-tie is a roofing kit built for the roofer, by the roofer. The Lil' bucket of safe-tie comes with one HUV harness (different size options are available), one 6 ft single leg lanyard with shock pack and one nylon bag for equipment transportation and storage.
|
Qualcraft Bucket of Safe-Tie Kit, Specifications: 300 lb Capacity, Polyester/Polypropylene, Includes: UV Universal Harness with 5-Point of Adjustment, 50 ft Vertical Lifeline Assembly with Shock Pack, Positioning Device, 18 in Extension Lanyard, Temper Anchor with Fasteners
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Qualcraft Bucket of Safe-Tie Kit, Specifications: 300 lb Capacity, Polyester/Polypropylene, Includes: UV Universal Harness with 5-Point of Adjustment, 25 ft Vertical Lifeline Assembly with Shock Pack, Positioning Device, 18 in Extension Lanyard, Temper Anchor with Fasteners
|
The bucket of safe-tie is a roofing kit built for the roofer, by the roofer. It is one of the few kits available on the market that includes a lifeline with an integrated shock absorber, which allows the worker to never have to worry about incorporating an additional shock absorbing lanyard into their fall protection system. Removing the shock absorbing component from the worker's back also results in less weight placed on the dorsal D-ring, resulting in an increase in comfort level and ease of movement. The bucket of safe-tie comes in a variety of configurations and can be customized for specific customer needs.
|
Expanding upon the wide array of features offered by the Series 1, the Guardian Series 3 full body harness offers the worker at height an extra measure of comfort and performance. Series 3 harnesses feature durable water repellant, contrasting core webbing that makes any damage easy to see, greatly improving the inspection process. Snap-on shoulder pads increase comfort and are removable for washing. The SRL connector loop allows you to mount a personal SRL while keeping the D-ring free for incidental tie-offs. An available waist belt is articulated for an ergonomic fit, helping to support heavy tools or just providing extra support for a long day's work and the laminated waist belt will not fold during use. Webbing ends are folded and stitched with rubber tabs for durability and rubber web keepers prevent loose straps from interfering with your work. Dual lanyard keepers safely store unused lanyard legs and the spring loaded torso adjusters make fitting the harness fast and precise. Available with or without side, shoulder or sternal D-rings and with quick-connect, pass-through or tongue and grommet buckles.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Expanding upon the wide array of features offered by the Series 1, the Guardian Series 3 full body harness offers the worker at height an extra measure of comfort and performance. Series 3 harnesses feature durable water repellant, contrasting core webbing that makes any damage easy to see, greatly improving the inspection process. Snap-on shoulder pads increase comfort and are removable for washing. The SRL connector loop allows you to mount a personal SRL while keeping the D-ring free for incidental tie-offs. An available waist belt is articulated for an ergonomic fit, helping to support heavy tools or just providing extra support for a long day's work and the laminated waist belt will not fold during use. Webbing ends are folded and stitched with rubber tabs for durability and rubber web keepers prevent loose straps from interfering with your work. Dual lanyard keepers safely store unused lanyard legs and the spring loaded torso adjusters make fitting the harness fast and precise. Available with or without side, shoulder or sternal D-rings and with quick-connect, pass-through or tongue and grommet buckles.
|
Qualcraft Removable Rope Grab With Attached 18 in Extension Lanyard
|
The Guardian GR6 is so lightweight, you'll almost forget you are wearing it. At a mere 1.7 lb and 3.3 x 2.5 x 2.5 in, the GR6 is the smallest and lightest SRL in its class but weight is the only thing it gives up. The GR6's housing is constructed from UV stabilized, high-strength polycarbonate/ABS and surrounds an incredibly strong steel load bearing chassis. The sealed housing helps keep out dirt and other contaminants, providing extra protection for the internal components. Its HMPE webbing is ultra lightweight and abrasion-resistant for a long life and is perfect for applications like solar that benefit from a more supple lifeline. Available with steel or aluminum snap or rebar hooks, the GR6 is a perfect fit in general industry, maintenance and rebar applications.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Safety Works Roof Kit with Rope, Specifications: 25 ft Rope Length
|
The Guardian Fall Protection Halo series web self-retracting lifeline (SRL), formerly the edge series web SRL, is designed with a specialized quick action braking system and is manufactured from non-corrosive, lightweight components. Extremely durable and compact, Halo SRLs will stand up to even the harshest working conditions.
|
Qualcraft Industries Disposable Snappy Anchor, Stainless Steel, Includes: Nails
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The new velocity SRL Series from Qualcraft Industries includes models with lengths ranging from 16 to 100 ft and is available with lifelines composed of either galvanized cable or webbing. Velocity SRLs feature swivel tops and swivel snap hooks as well as lightweight and durable glass-filled nylon housing.
|
The Guardian Fall Protection Halo series self-retracting lifeline (SRL) is designed with a specialized quick action braking system and is manufactured from non-corrosive, lightweight components. Extremely durable and available with a variety of connector options, Halo SRLs will stand up to even the harshest working conditions.
|
|
|
VIEW MAP & PHOTO GALLERY | CALL US: 406-466-3100
