Home > HEATING & COOLING > FIREPLACES & STOVES > STOVE PIPE & ACCESSORIES > PELLET PIPE FITTINGS
Sort By:
Page of 1
Pellet Pipe 243810 Storm Collar Selkirk 243430 Tee Support Selkirk 243502 Trim Plate
Type L pellent vent storm collar used at the top of the flashing to assist in shedding water from the assembly. Selkirk Tee Support, Dimensions: 3 in Dia Selkirk Trim Plate, Black, Dimensions: 3 in Dia
Selkirk 243520 Wall Bracket Pellet Pipe 243800 Vertical Termination Stove Pipe Cap 8 in OD Selkirk 243243 Adjustable Pipe Connector
For use on the exterior to support pipe to wall. Use only with Selkirk pellet stove pipe. Hold pipe 3 in from wall. UL listed. Vertical round top/termination cap. Type L pellet vent. Cap provides necessary protection of the vent system from rain and other elements. UL listed. Adjustable pipe connector will connect to 3 in appliance outlet and is securely fastened with a hose clamp, while the male end adapts to the standard inlet end of 3 in VP pipe, elbow or tee. UL listed.
Selkirk A 243825 Adjustable Pellet Vent Roof Flashing Pellet Pipe 243215 Type L Vent Stove Pipe Elbow Pellet Pipe 243230 Type L Vent Stove Pipe Elbow
Type L pellet vent. Flashings are used for keeping water and other debris from entering between the pipe and roof. Adjustable pitch. UL Listed. Selkirk Pellet Adjustable Stove Elbow, Angle: 45 deg, Dimensions: 3 in Dia Type L vent systems for pellet stove applications. For use in accommodating unusual offsets and configurations. Up to 90 deg maximum. Rated for flue temperatures up to 570 deg F. Model VP may be installed with a minimum 1 in air space clearance to combustible surfaces, framing lumber, drywall and plywood. UL listed.
Pellet Pipe 243805 Horizontal Termination Stove Pipe Cap 8 in OD Selkirk 243410 Ceiling Support Pellet Pipe 243460 Wall Thimble
Horizontal termination cap is designed specifically for use on installations in which the Type L vent terminates in a horizontal orientation on the outside of a structure. UL listed. Type L pellet vent ceiling support/firestop. Type L pellet vent wall thimble must be used in all thru-the-wall installations involving combustible construction. UL listed.
Pellet Pipe 243246 Insulated Type L Chimney Adapter Pellet Pipe 243248 Insulated Type L Chimney Adapter Pellet Pipe 243100 Stove Pipe Tee With Cap
Type L Pellet Vent to Selkirk Insulated Chimney Adapters are for use in connecting a Model VP Vent System into an existing Selkirk Chimney system. Type L Pellet Vent to Selkirk insulated chimney adapters are for use in connecting a Model VP vent system into an existing Selkirk chimney system. Type L air insulated pellet vent tee with cap designed for use in changing the orientation of the vent from horizontal to vertical and making inspection and cleaning of pellet stove system easier. UL listed.
Selkirk 243424 Cathedral Ceiling Support Selkirk 283870 Thru-The-Wall Stove Vent Kit
Used in cathedral-style installations. Painted black for decorative finish. For pellet and corn appliances. Kit contains 3 in horizontal cap, 3 in 90 deg elbow, 3 in wall bracket, five 3 in 1 ft pipe lengths, 3 in tee with cleanout, 3 in wall thimble and 3 in pipe connector. System rated for flue temperatures up to 570 deg. Proven coupling joint connects in seconds to assure joint integrity. Gasketed joint design. Inner wall is 304 stainless steel, outer wall is paintable galvanized. Rolled-over male end eliminates sharp edges. 1 in clearance to combustibles. Removable tee cap for inspection and cleaning. Internal spacing bead assures uniform insulating air space between pipe walls. Meets UL-641 and UL-103.