|
|
|
|
|
|
|
|
|
|
|
Eco-Flo Sump Pump Check Valve, 1-1/2 x 1-1/4 or 1-1/2 in Connection, MPT x Barb or Spigot Connection, Body Material: Plastic
|
Certified to NSF 61 requirements.
|
Water Source Check Valve, 3/4 in Nominal, Media: Gas, Oil, Water, Brass Body, 200 psi Pressure
|
|
|
|
|
|
|
|
|
|
|
|
|
Certified to NSF 61 requirements.
|
Boshart Check Valve, Nominal Size: 3/4 in, Body Material: Brass, Softgoods Material: NBR, 200 psi, Temperature Rating: 180 deg F
|
The 1 in two-hole brass control center check valve gives full engagement of accessories without reducing water flow or poppet operation. This piece is mainly used where space is limited. It is easy to install.
|
|
|
|
|
|
|
|
|
|
|
|
|
The 1-1/4 in two hole brass control center check valve gives full engagement of accessories without reducing water flow or poppet operation. This piece is mainly used where space is limited. It is easy to install.
|
Boshart Check Valve, Nominal Size: 1 in, Body Material: Brass, Softgoods Material: NBR, 200 psi, Temperature Rating: 180 deg F
|
Certified to NSF 61 requirements.
|
|
|
|
|
|
|
|
|
|
|
|
|
Water Source Check Valve, Nominal Size: 1-1/4 in, Body Material: Brass, 200 psi, Suitable for: Jet, Submersible and Centrifugal Pumps
|
Water Source Check Valve, Nominal Size: 1-1/2 in, Body Material: Brass, 200 psi, Suitable for: Jet, Submersible and Centrifugal Pumps
|
Boshart Check Valve, Nominal Size: 1-1/4 in, Body Material: Brass, Softgoods Material: NBR, 200 psi, Temperature Rating: 180 deg F
|
|
|
|
|
|
|
|
|
|
|
|
|
Certified to NSF 61 requirements.
|
Boshart Check Valve, Nominal Size: 1-1/2 in, Body Material: Brass, Softgoods Material: NBR, 200 psi, Temperature Rating: 180 deg F
|
Certified to NSF 61 requirements.
|
|
|
|
|
|
|
|
|
|
|
|
|
Water Source Check Valve, Nominal Size: 2 in, Media: Cold Water, Gas, Oil, Body Material: Brass, 200 psi
|
Silicon bronze cast body and poppet contain less than 0.05% Lead. Furnished with Buna-N O-ring, stainless steel spring, washer and locknut. All valves 1/2 in through 1-1/2 in have a working pressure of 400 psi. All valves 2 in and larger have a working pressure of 600 psi.
|
Silicon bronze cast body and poppet contain less than 0.05% lead. Furnished with Buna-N O-ring, stainless steel spring, washer and locknut. All valves 1/2 in through 1-1/2 in have a working pressure of 400 psi. All valves 2 in and larger have a working pressure of 600 psi.
|
|
|
|
|
|
|
|
|
|
|
|
|
Silicon bronze cast body and poppet contain less than 0.05% Lead. Furnished with Buna-N O-ring, stainless steel spring, washer and locknut. All valves 1/2 in through 1-1/2 in have a working pressure of 400 psi. All valves 2 in and larger have a working pressure of 600 psi.
|
Certified to NSF 61 requirements.
|
Silicon bronze cast body and poppet contain less than 0.05% lead. Furnished with Buna-N O-ring, stainless steel spring, washer and locknut. All valves 1/2 in through 1-1/2 in have a working pressure of 400 psi. All valves 2 in and larger have a working pressure of 600 psi.
|
|
|
|
|
|
|
|
|
|
|
|
|
This 3/4 by 3/4 in lead-free dual check valve prevents the reverse flow of polluted water from entering into the drinking water supply at the service entrance or at individual outlets. The valve consists of a lead-free brass body construction, with two plastic replaceable check valves and stainless steel springs. It is designed for non-health hazard residential water system containment, continuous pressure applications and is to be installed immediately downstream of the residential water meter, in a vertical or horizontal position. The minimum working pressure is 10 psi and maximum working pressure is 175 psi.
|
Silicon bronze cast body and poppet contain less than 0.05% lead. Furnished with Buna-N O-ring, stainless steel spring, stainless steel washer and stainless steel locknut. 400 psi working pressure.
|
Silicon bronze cast body and poppet contain less than 0.05% lead. Furnished with Buna-N O-ring, stainless steel spring, washer and locknut. All valves 1/2 in through 1-1/2 in have a working pressure of 400 psi. All valves 2 in and larger have a working pressure of 600 psi.
|
|
|
|
|
|
|
|
|
Silicon bronze cast body and poppet contain less than 0.05% lead. Furnished with Buna-N O-ring, stainless steel spring, washer and locknut. All valves 1/2 in through 1-1/2 in have a working pressure of 400 psi. All valves 2 in and larger have a working pressure of 600 psi.
|
|