Home > PLUMBING > ROUGH PLUMBING SUPPLIES > SOLVENTS & SEALERS
Choose a sub category:
PIPE CEMENTS PIPE CLEANERS & PRIMERS THREAD SEALANT COMPOUNDS
THREAD SEALANT TAPES GAS LEAK DETECTORS PLUMBERS PUTTY
PLUMBING EPOXYS
Sort By:
Page of 3
Harvey's 017072B-500 Pipe Thread Seal Tape Harvey's 017117B Pipe Thread Seal Tape ProSource PMB-445 Pipe Seal Tape
0.4 density, 0.003 in thick. Over 50% elongation and chemically inert. Provides a strong tight seal for any threaded joint and permits easy disassembly. Tolerates -400 to 500 deg F. Non-toxic and non-flammable. Meets Federal Specification T-27730A. Harvey Thread Seal Tape, PTFE, Red/White, 520 in L, 1/2 in W, 0.003 in Thick, Density: 0.4 g/cc, Temperature Rating: -400 to 500 deg F, Elongation: 50 % The plumber tape is adhesive tape that is usable on a variety of plumbing fixtures. It fixes leaks and loose pipes for smoother water flow.
Plumb Pak 04151 Pipe Thread Seal Tape Oatey 31199 Pipe Thread Seal Tape TAPE PTFE GRAY 1/2IN X 260FT
Plumb Pak Thread Seal Tape, PTFE, 520 in L, 1/2 in W Oatey? PTFE white general-purpose thread seal tape provides a clean, positive seal on threaded connections. White thread seal tape is an all-purpose thread sealing tape and can be used with plastic, brass, copper, aluminum, galvanized steel or black iron piping. Hercules Mega tape is an all-purpose, professional-grade PTFE thread-sealing tape designed for use on a wide range of threaded pipes.
Harvey's 017252-144 Pipe Thread Seal Tape Harvey's 017209B Pipe Thread Seal Tape Oatey 31166 Plumbers Putty
Harvey Thread Seal Tape, PTFE, White, 520 in L, 3/4 in W, 0.003 in Thick, Density: 0.4 +/- 0.1 g/cc, Temperature Rating: -400 to 500 deg F, Elongation: 50 % 0.4 density, 0.003 in thick. Over 50% elongation and chemically inert. Provides a strong tight seal for any threaded joint and permits easy disassembly. Tolerates -400 to 500 deg F. Non-toxic and non-flammable. Meets Federal Specification T-27730A. Ideal for use on natural surface materials found in sinks, countertops, strainers and shower bases. Remains flexible, so it is easy to work with and cleans up easily.
Harvey's 023015-48 Pipe Joint Compound Oatey 48005 Great White Harvey's 043010 Plumbers Putty
White thread lubricant and sealant. Brushable paste dries slowly, non-hardening, withstands up to 3000 psi on gases at temps from -50 to 500 deg F. Use on water, steam, natural and LP gas, oils, fuels, dilute acids. Apply to metals, PVC, CPVC, ABS, polypropylene and nylon. all purpose sealant for heavy-duty applications. Warning, never use any pipe thread sealant paste or stick on halogens or oxygen, use PTFE pipe thread tape. Oatey? pipe joint compound is a firm, smooth sealing compound formulated for most metal threads to create tight joints on lines carrying water, steam or air. Harvey? plumber's putty is an easy-to-use and long-lasting putty widely used for setting bowls, rims, strainers and faucets. It remains flexible and will not harden, shrink, crack or crumble even if the cup is left open.
Oatey 31202 Pipe Thread Seal Tape Oatey 48003 Plumbers Putty Harvey 030005-144 Pipe Thread Compound
Oatey? PTFE white general-purpose thread seal tape provides a clean, positive seal on threaded connections. White thread seal tape is an all-purpose thread sealing tape and can be used with plastic, brass, copper, aluminum, galvanized steel or black iron piping. Oatey? plumber's putty is a stainless, long-lasting, easy-to-use fixture setting compound for frames, faucets and basket strainers. It provides a waterproof seal between two rigid surfaces that remains flexible and will not harden, shrink, crack or crumble. Harvey? pipe thread stick is a non-hardening gray thread compound designed to lubricate and seal threaded joints on metal pipe.
Oatey 31489 Primer/Cleaner Harvey's 017065 Pipe Thread Seal Tape Oatey 31229 Great White
Oatey Primer/Cleaner, Series: 31489, 118 ml Capacity, Can Packing, Liquid, Purple, Ether-Like Odor/Scent, Composition: Tetrahydrofuran, Methyl Ethyl Ketone, Acetone, Cyclohexanone, 0.81 at 20 deg C Specific Gravity, 14 - 23 deg F Flash Point, 550 g/l VOC, Applicable Materials: PVC and CPVC, 2.5 Vapor Density, For Pipe and Fittings Extra heavy, full density tape especially for gas lines. Recommended leak-proof sealant for lines carrying natural gas, propane, butane, water, oil and chemical installations. Use on plastic, stainless steel, aluminum and all metals, ceramic, synthetic rubber, monel and carbon pipe, conduit, valves, bolts, anything with a thread. Permits easy disassembly. Pressure rating of 10,000 psi 0.0035 mil thick, tolerates up to -450 to 500 deg F. Meets Federal Specification T-27730A. UL listed. Lubricates and seals all threaded joints. White. Non-hardening, non-separating, non-toxic paste. Withstands up to 3000 psi on gases from -50 to 400 deg F and 10,000 psi on liquids from -50 to 500 deg F. For use with water, steam, Ammonia and Nitrogen gas, oil, caustics or dilute acid lines of PVC, CPVC, ABS, Polypropylene, iron, steel or copper. NSF and IAPMO listed.
Oatey 31403 Gas Line Thread Tape Harvey's 044010 Epoxy Putty Oatey 31212 Pipe Thread Seal Tape
Manufactured especially for natural gas, propane, butane, water, oil and chemical lines. Heavier than white tape with density of 1.35 to 1.5 g/cu-cm and 4 mil thick. Complies with MIL-T-22230A (ASG), UL 31 RO, AGA 3226 and CAN/ULC-S642. Spool - dispenser box. Hardens like steel in 20 mins. For use on plumbing, underwater, bathroom, auto, electrical and most any place in the home. Stops leaks, easy mix, makes repairs fast. Plugs, seals, mends, patches and is non-toxic. Patches holes, cracks and mends almost anything that is broken. Excellent to rebuild or fabricate parts and as an all-purpose adhesive for metals, wood, glass, masonry, ceramics and many plastics. Do not use with polyethylene or polypropylene. Can be drilled, tapped, filed, sanded and painted like metal. You must press until trapped water is forced out from under putty when repairing leaking pipes. Wet putty will require longer cure time. Oatey? PTFE white general-purpose thread seal tape provides a clean, positive seal on threaded connections. White thread seal tape is an all-purpose thread sealing tape and can be used with plastic, brass, copper, aluminum, galvanized steel or black iron piping.
TAPE SEAL PTFE 1X520 Oatey 48007 Great White Harvey's 017165-144 Pipe Thread Seal Tape
0.4 density, 0.003 in thick. Over 50% elongation and chemically inert. Provides a strong tight seal for any threaded joint and permits easy disassembly. Tolerates -400 to 500 deg F. Non-toxic and non-flammable. Meets Federal Specification T-27730A. Oatey? Great White? pipe joint compound with PTFE is a non-hardening, non-separating, non-toxic paste that lubricates and seals all threaded joints. 0.4 density, 0.003 in thick. Over 50% elongation and chemically inert. Provides a strong tight seal for any threaded joint and permits easy disassembly. Tolerates -400 to 500 deg F. Non-toxic and non-flammable. Meets Federal Specification T-27730A.
CEM CLNR ABS CLR 118ML Oatey 31402D Water Line Thread Seal Tape Oatey 31177 Stain-Free Plumbers Putty
Oatey Pipe Cleaner, 118 mL, Translucent Liquid, Clear, Solvent, Compositions: Acetone, Cyclohexanone, Viscosity: <10 cPs, VOC Content: 20 g/L, Flash Point: 4 deg F, Boiling Point: 151 deg F, Density: 2.5 Provides fast positive seal for water lines, sewage lines and sprinkler systems. Effective on metal or plastic threads. 3 mil thick and density of 1.35 to 1.5 g/cu-cm. Complies with MIL-T-27730A and UL 31 RO. Spool- display carton. Ideal for use on natural surface materials found in sinks, countertops, strainers and shower bases. Remains flexible, so it is easy to work with and cleans up easily.
Harvey's 039300 Gas Leak Detectors Harvey's 029035 Pipe Thread Compound TAPE PTFE GRAY 3/4 X 1000IN
Detects any gas leak in just a few seconds on all types of tubing, valve, cylinders, pressurized tanks or any system under air, gas or oxygen pressure. May be used at temperatures between -50 to 160 deg F. Non-toxic, biodegradable, user friendly, non-corrosive and non-irritating to most skin. Gray, non-drip paste for pipe joint threads on lines carrying water, steam, air or natural gas. Prevents corrosion to threads. Never hardens, joints separate easily. Contains no lead, non-toxic. Do not apply to plastic threads. Use Harvey? TFE Paste or PTFE Tape made of Teflon on plastic threaded joints. Brushtop bottle. Hercules? MEGATAPE is an all-purpose, professional-grade PTFE thread-sealing tape designed for use on a wide range of threaded pipes.
Oatey 31012 PVC Cement Oatey 48008 Great White PRIMER PVC CLEAR 118ML
Regular-bodied clear cement recommended for use on PVC pipe and fittings up to 4 in for schedule 40 and up to 2 in for SCH 80 potable water pressure pipe, gas, conduit, drain waste and vent pipe. Flows freely. Sets up quickly. Apply at temperature 40 to 110 deg F. NSF and UPC listed. Exceeds ASTM D-2564. Oatey? Great White? pipe joint compound with PTFE is a non-hardening, non-separating, non-toxic paste that lubricates and seals all threaded joints. Oatey Primer, Net Content: 118 mL, Liquid, Clear, Odor/Scent: Ether-Like, Compositions: Tetrahydrofuran, Methyl Ethyl Ketone, Acetone, Cyclohexanone, VOC Content: 550 g/L, Flash Point: -10 to -5 deg C, Boiling Point: 151 deg F, Flammability Rating: 3, Density: 2.5, Specific Gravity: 0.84
CLEANER ABS/PVC 236ML Oatey 30999 ABS Cement CEMENT ABS SOLVENT 118ML
Low-VOC, flows freely and evaporates quickly, fast-acting cleaner removes surface dirt, grease and grime. All schedules and all diameters. Child-resistant cap. Medium-bodied black cement for use on all schedules and classes of ABS pipe and fittings up to 6 in Dia with interference fit. Lo-VOC solvent cement meets California South Coast Air Quality Management District 1168/316A or BAAQMD Method 40 and various environmental requirements. For all non-pressure applications. Medium-bodied yellow colored cement for ABS pipe and fittings. Up to 6 in Dia. For all types and grades of ABS pipe and fittings for DWV. Low-VOC, for all non-pressure applications. Meets ASTM D2235.
Oatey 31540 ABS Cement Oatey 30755 PVC/CPVC Primer Plumb Pak PP854-2 Pipe Joint Compound
Oatey Pipe Cement, Net Content: 118 mL, Liquid, Yellow, Compositions: Methyl Ethyl Ketone, ABS Resin, Acetone, Specific Gravity: 0.88, Flash Point: 14 to 23 deg F, VOC Content: <325 g/L, Boiling Point: 151 deg F, Temperature Rating: 40 to 110 deg F, Applicable Materials: ABS Oatey purple primer is an NSF listed, aggressive primer for use on PVC and CPVC pipe and fittings. Plumb Pak Pipe Joint Compound, Net Content: 2 oz, Tube
Rectorseal 23710 T-Plus 2 Pipe Thread Sealant Rectorseal 25790 Pipe Thread Sealant Christy's RH.RHBV.QP.48 PVC Cement
Rectorseal T Plus 2? pipe thread sealant is a non-setting, multi-purpose compound which contains PTFE, plus synthetic fibers to create a stronger seal. Recommended for use on threaded galvanized steel, iron, brass, copper, aluminum, stainless steel, polyethylene, fiberglass reinforced, PVC, CPVC and ABS pipe. Rectorseal No 5? pipe thread sealant is a soft-set, slow drying compound which seals, lubricates and protects threaded pipe and fittings. It can be pressurized immediately for piping up through 2 in and 100 psi (for natural gas, air and water only) and is ideal for application with a wide variety of fluids and gases, including potable water applications. Recommended for use on threaded galvanized steel, iron, brass, copper, aluminum, stainless steel, polyethylene, fiberglass reinforced and PVC pipe. Christy's? Red Hot Blue Glue? is a very aggressive, deep blue, medium bodied, very fast setting PVC solvent cement. Christy's? Red Hot Blue Glue? is the industry's high quality blue glue, from the leading producer of high performance solvent cements.
Oatey 30818 All-Purpose Cement COMP PP JNT PASTE 8OZ BTL CEMENT PVC 118ML CLEAR
Medium bodied milky clear cement for ABS, PVC or CPVC up to 6 in Dia. Recommended for pipe and fittings SCH 40 and 80, potable water, pressure pipe, gas, conduit and DWV. Recommended application temperature 40 to 110 deg F. Meets performance requirements of ASTM D-2564, D-2235, F-493. Check local codes for acceptability of this product. Oatey? Great White? pipe joint compound with PTFE is a non-hardening, non-separating, non-toxic paste that lubricates and seals all threaded joints. Oatey Pipe Cement, Net Content: 118 mL, Liquid, Clear, Compositions: Tetrahydro- Furan, Acetone, Methyl Ethyl Ketone, chloro- homopolymer Ethene, Polyvinyl Chloride, Cyclohexanone, Fumed Silica, Viscosity: 1200 to 2500 cPs, VOC Content: <510 g/L, Flash Point: 14 to 23 deg F, Boiling Point: 151 deg F, Temperature Rating: 40 to 110 deg F, Density: 2.5, Applicable Materials: PVC
Oatey 31532 Abs/PVC Transition Cement Oatey 30890 Rain-R-Shine CEMENT ABS SOLVENT 236ML
Oatey Transition Cement, Net Content: 118 mL, Liquid, Odor/Scent: Solvent, White, Compositions: Tetrahydro- Furan, Acetone, Methyl Ethyl Ketone, Polyvinyl Chloride, Cyclohexanone, Amorphous Fumed Silica, Specific Gravity: 2.5, Boiling Point: 151 deg F, Flash Point: 14 to 23 deg F, VOC Content: <510 g/L, Viscosity: 1000 to 2100 cPs, Temperature Rating: 40 to 110 deg F, Applicable Materials: ABS, PVC Medium bodied, fast setting, colored cement recommended for PVC pipe and fittings of diameter up to 6 in. Formulated for wet conditions and when quick pressurization and fast installation is needed. For SCH 40 and Schedule 80 potable water pressure pipe, irrigation, gas, conduit and drain waste and vent pipe. Flows freely and covers with a thicker layer than regular PVC cement. Apply at 40 to 110 deg F. Medium-bodied yellow colored cement for ABS pipe and fittings. Up to 6 in Dia. For all types and grades of ABS pipe and fittings for DWV. Low-VOC, for all non-pressure applications. Meets ASTM D2235.
Oatey 31515 CPVC Cement Harvey's 019050-24 PVC/CPVC Purple Primer Oatey 30883 PVC Cement
Oatey Solvent Cement, Net Content: 118 mL, Liquid, Clear, Compositions: Tetrahydro- Furan, Chloro- Homopolymer Chlorinated Ethene, Methyl Ethyl Ketone, Acetone, Cyclohexanone, Viscosity: 500 to 1500 cPs, VOC Content: <490 g/L, Flash Point: 14 to 23 deg F, Boiling Point: 151 deg F, Temperature Rating: 40 to 110 deg F, Density: 2.5 Harvey? purple primer is a professional-grade purple primer for use on all schedules and classes of CPVC and PVC pipe and fittings. Medium bodied gray cement for use on all schedules and classes of PVC pipe and fittings up to 6 in Dia with interference fit. Low VOC solvent cement meets California south coast air quality management district 1168/316A or BAAQMD Method 40 and various environmental requirements. Recommended for potable water, pressure pipe, conduit and DWV. Recommended application temperature of 40 to 110 deg.
CEMENT PVC 236ML CLEAR Oatey 31910 Flow-Guard Gold Harvey's 023030 Pipe Joint Compound
Oatey Pipe Cement, Net Content: 237 mL, Liquid, Clear, Compositions: Tetrahydro- Furan, Acetone, Methyl Ethyl Ketone, chloro- homopolymer Ethene, Polyvinyl Chloride, Cyclohexanone, Fumed Silica, Viscosity: 1200 to 2500 cPs, VOC Content: <510 g/L, Flash Point: 14 to 23 deg F, Boiling Point: 151 deg F, Temperature Rating: 40 to 110 deg F, Density: 2.5, Applicable Materials: PVC Medium bodied CPVC resin in solvent solution formula for copper tube size (CTS) CPVC hot and cold potable water pipe and fittings up to 2 in Dia interference fit only and systems up to 180 deg F. Faster cure time/reduced installation time. May be used without primer where local codes permit. Low VOC with reduced solvent emissions. Exceeds new environmental requirements, meets various California district rules and ASTM F-493. White thread lubricant and sealant. Brushable paste dries slowly, non-hardening, withstands up to 3000 psi on gases at temps from -50 to 500 deg F. Use on water, steam, natural and LP gas, oils, fuels, dilute acids. Apply to metals, PVC, CPVC, ABS, polypropylene and nylon. all purpose sealant for heavy-duty applications. Warning, never use any pipe thread sealant paste or stick on halogens or oxygen, use PTFE pipe thread tape.
Oatey 31506 PVC Cement SOLV CEM PVC 118ML GRY Harvey 019100-24 All Purpose Pipe Cleaner
Oatey Cement, Net Content: 236 mL, Liquid, Gray, Compositions: Tetrahydro- Furan, Acetone, Methyl Ethyl Ketone, Polyvinyl Chloride, Cyclohexanone, Fumed Silica, Viscosity: 1200 to 2500 cPs, VOC Content: <510 g/L, Flash Point: 14 to 23 deg F, Boiling Point: 151 deg F, Temperature Rating: 40 to 110 deg F, Density: 2.5, Applicable Materials: PVC, Curing Time: 2 hr Oatey One-Step Cement, Net Content: 118 mL, Liquid, Gray, Compositions: Tetrahydro- Furan, Acetone, Methyl Ethyl Ketone, Polyvinyl Chloride, Cyclohexanone, Fumed Silica, Viscosity: 1200 to 2500 cPs, VOC Content: <510 g/L, Flash Point: 14 to 23 deg F, Boiling Point: 151 deg F, Temperature Rating: 40 to 110 deg F, Density: 2.5, Applicable Materials: PVC Harvey? pipe cleaner is a fast-acting, all-purpose clear cleaner for ABS, CPVC and PVC pipe and fittings.
Oatey 31230 Great White Oatey 31128 CPVC Pipe and Fitting Cement PC-Plumbing 025598 2-Part Hand Moldable Epoxy Putty
Lubricates and seals all threaded joints. White. Non-hardening, non-separating, non-toxic paste. Withstands up to 3000 psi on gases from -50 to 400 deg F and 10,000 psi on liquids from -50 to 500 deg F. For use with water, steam, natural and LP gas, oil, caustics or dilute acid lines of PVC, CPVC, ABS, Cycolac, Polypropylene, iron, steel or copper. NSF and IAPMO listed. Brush included. Medium bodied, fast setting formula for use on CPVC pipe and tubing with interference fits only. 40 to 110 deg F optimum temperature. For use on smallest diameter through 6 in Dia. Particularly suited to hot water pipe applications up to 200 deg. Meets ASTM-F-493. NSF, UPC and IAPMO listed. PC-Plumbing? epoxy putty is for pipes. use PC-Plumbing? to stop leaks in less than 60 mins. Pre-measured and easy to use and two-part epoxy putty does not require tools. Hand mix and apply. NSF? approved for plumbing repairs and for contact with potable water supply pipes.
CEMENT PVC GREY 118ML Harvey's 018100-24 P-4 Oatey 31505 PVC Cement
Medium-bodied gray colored cement for PVC pipe and fittings. Up to 6 in Dia. Fast-setting cement formulated for wet conditions and/or quick pressurization and fast installation. Recommended for all grades and types of PVC pipe and fittings, potable water and DWV. Low-VOC solvent cement meets SCAQMD 1168/316A or BAAQMD Method 40 and various environmental requirements. Both SCH 40 and 80. Pool/Irrigation. Recommended application temperature 40 to 110 deg F/4 to 43 deg C. No primer needed on non-pressure DWV, up to 4 in where local codes permit. Meets ASTM D 2564. Regular-bodied, fast set PVC solvent cement designed for use on PVC pressure pipe and fittings up to 4 in. NSF certified for use in potable water, sewer and drain, waste and vent systems and should be applied at temperatures 40 to 110 deg F. UPC listed. Meets requirements of ASTM D-2564. Dauber can. Oatey Cement, Net Content: 118 mL, Liquid, Gray, Compositions: Tetrahydro- Furan, Acetone, Methyl Ethyl Ketone, Polyvinyl Chloride, Cyclohexanone, Fumed Silica, Viscosity: 1200 to 2500 cPs, VOC Content: <510 g/L, Flash Point: 14 to 23 deg F, Boiling Point: 151 deg F, Temperature Rating: 40 to 110 deg F, Density: 2.5, Applicable Materials: PVC, Curing Time: 2 hr
TAPE SEAL THRD SS 1/2INX260FT Oatey 31575 All-Purpose Cement Harvey's 018400-24 PVC Cement
Oatey Solvent Cement, All-Purpose, Medium Bodied, 118 ml Capacity, Can, 490 g/l VOC, 500 cPs Viscosity, Liquid, Milky Clear, 5 - 6 Min at 30 - 50 Deg F, 3 - 4 Min at 50 - 70 Deg F, 1 - 2 Min at 70 - 90 Deg F Setting, 2 hr Functional Cure, Ether Like Odor/Scent, 14 - 23 Deg F Flash Point, Media: Dry Chemical, Carbon Dioxide, Foam and Water, Composition: Tetrahydrofuran, Methyl Ethyl Ketone, Acetone, PVC Resin, CPVC Resin, Cyclohexanone, Amorphous Fumed Silica, Flammability Rating: 1.8 LFL, 11.8 UFL, 0.94 Specific Gravity, 40 - 110 Deg F Application, Applicable Materials: ABS, PVC and CPVC, Application Method: Bristle Brush or Roller, 250 psi For 2 hr, 500 psi For 16 hr, 900 psi For 72 hr Shear, Standards: ASTM D2564/D2235/F493, SCAQMD 1168/316A, BAAQMD Method 40, For Potable Water, Pressure Pipe, Conduit and DWV Fast setting, medium bodied PVC solvent cement specifically recommended for wet conditions or when quick pressurization is needed. Recommended for pressure pipes such as SCH 40 and 80 Types I and II, up to 6 in. NSF certified for use in potable water, sewer, drain, waste and vent systems. Effective temperature range is 40 to 110 deg F. UPC listed. Meets performance requirements of ASTM D-2564. Dauber can.
Oatey 30889 ABS Cement Brass Craft PS1087 Seal 'N Check Kit Oatey 31013 PVC Cement
Medium-bodied black cement for use on all schedules and classes of ABS pipe and fittings up to 6 in Dia with interference fit. Lo-VOC solvent cement meets California South Coast Air Quality Management District 1168/316A or BAAQMD Method 40 and various environmental requirements. For all non-pressure applications. Pipe thread sealant is used to seal male to female pipe threads. The leak detection solution is applied (poured) on the joints of a gas installation to detect unsafe seals in the component-to-component connections (shut-off valve to adapter to gas connector and gas connector to adapter to appliance regulator). Bubbles in the solution will indicate a leak. The pipe thread sealant is preferred over gas PTFE tape because of its fluidity - it seals up the crevices of the Male to Female thread engagement and provides a better seal. The leak detection solution does not contain soap or detergents, eliminating a false reading. Regular-bodied clear cement recommended for use on PVC pipe and fittings up to 4 in for schedule 40 and up to 2 in for SCH 80 potable water pressure pipe, gas, conduit, drain waste and vent pipe. Flows freely. Sets up quickly. Apply at temperature 40 to 110 deg F. NSF and UPC listed. Exceeds ASTM D-2564.
Harvey's 043050 Plumbers Putty Harvey's 018500-24 A-6 Harvey's 025020 Pipe Thread Compound
Harvey? plumber's putty is an easy-to-use and long-lasting putty widely used for setting bowls, rims, strainers and faucets. It remains flexible and will not harden, shrink, crack or crumble even if the cup is left open. Medium-bodied, medium set, ABS solvent cement designed for use on non-pressure ABS pipe and fittings, SCH 40, Types I and II, up to 6 in. Apply at temperatures 40 to 110 deg F. NSF certified and UPC listed. Meets requirements of ASTM D-2235. Dauber can. Use on all metals, plastic PVC, CPVC, ABS and nylon threads. Tolerates -50 to 400 deg F, gas to 3000 psi, liquid to 6000 psi. Soft, slow drying, never seizes, allows easy disassembly. SEALANT for all types of gas lines. Brushtop bottle.
Oatey 31129 CPVC Pipe and Fitting Cement Oatey 30779 All Purpose Pipe Cleaner Rectorseal 25631 Pipe Thread Sealant
Medium bodied, fast setting formula for use on CPVC pipe and tubing with interference fits only. 40 to 110 deg F optimum temperature. For use on smallest diameter through 6 in Dias. Particularly suited to hot water pipe applications up to 200 deg. Meets ASTM-F-493. NSF, UPC and IAPMO listed. Oatey Clear Cleaner is a simple and effective cleaner formulated for ABS, PVC and CPVC pipe and fittings that flows freely and evaporates quickly. Rectorseal No 5? pipe thread sealant is a soft-set, slow drying compound which seals, lubricates and protects threaded pipe and fittings. It can be pressurized immediately for piping up through 2 in and 100 psi (for natural gas, air and water only) and is ideal for application with a wide variety of fluids and gases, including potable water applications. Recommended for use on threaded galvanized steel, iron, brass, copper, aluminum, stainless steel, polyethylene, fiberglass reinforced and PVC pipe.
Harvey's 044150-12 Epoxy Putty Oatey Fix-It Epoxy Putty CEM PVC&CPVC 236ML CLR
Hardens like steel in 20 mins. For use on plumbing, underwater, bathroom, auto, electrical and most any place in the home. Stops leaks, easy mix, makes repairs fast. Plugs, seals, mends, patches and is non-toxic. Patches holes, cracks and mends almost anything that is broken. Excellent to rebuild or fabricate parts and as an all-purpose adhesive for metals, wood, glass, masonry, ceramics and many plastics. Do not use with polyethylene or polypropylene. Can be drilled, tapped, filed, sanded and painted like metal. You must press until trapped water is forced out from under putty when repairing leaking pipes. Wet putty will require longer cure time. For sealing, patching and mending compounds. Repairs anything that leaks or is broken. Steel filled, mixes in your hands and hardens in minutes. Ideal for fabricating or rebuilding parts. May be drilled, tapped, filed, sealed and painted. Resists abrasion and a variety of chemicals. Contains no solvents, is non-toxic and will not shrink. Oatey Primer, Net Content: 236 mL, Liquid, Clear, Odor/Scent: Ether-Like, Compositions: Tetrahydrofuran, Methyl Ethyl Ketone, Acetone, Cyclohexanone, VOC Content: 550 g/L, Flash Point: -10 to -5 deg C, Boiling Point: 151 deg F, Flammability Rating: 3, Density: 2.5, Specific Gravity: 0.84
Rectorseal 23631 T-Plus 2 Oatey 30780 PVC/CPVC Primer/Cleaner Harvey 019110-24 All Purpose Pipe Cleaner
Rectorseal T Plus 2? pipe thread sealant is a non-setting, multi-purpose compound which contains PTFE, plus synthetic fibers to create a stronger seal. Recommended for use on threaded galvanized steel, iron, brass, copper, aluminum, stainless steel, polyethylene, fiberglass reinforced, PVC, CPVC and ABS pipe. Oatey Purple primer/cleaner is a dual-purpose primer and cleaner for use on all schedules and classes of CPVC and PVC pipe and fittings. Harvey? pipe cleaner is a fast-acting, all-purpose clear cleaner for ABS, CPVC and PVC pipe and fittings.
Plumb Pak PP854-1 Pipe Thread Sealant Oatey 30850 PVC Cement Harvey's 018450-24 P-6E
Plumb Pak Pipe Thread Sealant, Net Content: 2 oz, Tube, Applicable Materials: TFE Heavy bodied clear cement for PVC pipe and fittings. Up to 12 in Dia for SCH 40 and 80. Recommended for all grades and types of PVC pipe and fittings, potable water, pressure pipe, gas, conduit and DWV. Helps fill gaps in larger diameter pipe and loose fitting joints. Apply at temperatures 40 to 110 deg F. Exceeds ASTM D-2564. NSF and UPC listed. For electrical PVC conduit and plumbing PVC applications. Medium bodied, medium set, designed for use on all duct and conduit applications through 6 in Dia. Apply at temperatures 40 to 110 deg F. NSF certified for use in potable water, sewer, drain and waste and vent systems. UPC listed. Meet requirements of ASTM D-2564. Dauber can.
CEMENT PVC CLEAR MEDIUM 8OZ Rectorseal 55910 PVC/CPVC Primer/Cleaner CEM CPVC 236ML CLR
Oatey? PVC Medium Bodied Fast Set Clear Cement is recommended for DWV, pressure pipe, potable water and electrical applications. Its medium body has excellent gap filling properties and is easy to apply with included in-lid dauber. This clear, fast set cement can be used to solvent weld all schedules and classes of PVC pipe and fittings up to 6 in. diameter with interference fit. Oatey products have earned the trust of plumbing professionals for over 100 years. Hi-etch primer specifically formulated for all PVC and CPVC pipe applications such as potable water, pressure pipe, gas, conduit, sewers and drain, waste and vent (DWV). Fast acting, hi-etch primer prepares the surfaces for excellent bonding strength, purple color ensures easy visual check for complete coverage. For use on all sizes and classes in both SCH 40 and 80. NSF approved, LEED compliant, UPC (IAPMO) listed, meets ASTM F 656 specifications. Dauber can. Oatey Pipe Cement, Net Content: 236 mL, Liquid, Clear, Compositions: Furan, Tetrahydro, Ethene, Chloro, Homopolymer, Chlorinated, Methyl Ethyl Ketone, Acetone, Cyclohexanone, Viscosity: 500 to 1500 cPs, VOC Content: 490 g/L, Flash Point: 14 to 23 deg F, Boiling Point: 151 deg F, Density: 0.95
Oatey 30246 Primer/Cement Pack Oatey 30756 PVC/CPVC Primer Oatey 31541 Abs Cement
Contains one can of regular clear PVC cement and one can of NSF purple primer. Ideal size for most pipe installations. Oatey purple primer is an NSF listed, aggressive primer for use on PVC and CPVC pipe and fittings. Oatey Pipe Cement, Net Content: 236 mL, Liquid, Yellow, Compositions: Methyl Ethyl Ketone, ABS Resin, Acetone, Specific Gravity: 0.88, Flash Point: 14 to 23 deg F, VOC Content: <325 g/L, Boiling Point: 151 deg F, Temperature Rating: 40 to 110 deg F, Applicable Materials: ABS