|
|
|
|
|
|
|
|
|
|
|
|
|
|
Reverse Osmosis storage tank valve. Produced in polypropylene and fitted with EPDM O-ring, more chemical-resistant than acetal. Use in potable water applications. Not to be used with compressed air, explosive gases, petroleum spirits and other fuels or for heating systems. Sizes indicated are Tube OD x Thread NPTF.
|
Boshart Stop Valve, 1/2 x 3/8 in Connection, Push x Compression Connection
|
ProBite's lead-free quarter turn straight push connect? ball valve connect to copper, CPVC and PEX tubing without the use of glues, clamping or other plumbing tools. With only your hands you can connect our ball valves in a matter of seconds. The 1/2 in x 3/8 in straight stop valve is the ideal solution for a variety of plumbing applications.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Our lead-free 1/4 turn angle ball valve provides a leak-free long-lasting connection to copper, CPVC and PEX tubing. With easy push connect technology, our lead-free ball valves can be installed in seconds. The 1/2 in angle stop valve allows for connection to a variety of plumbing applications and is great for connecting toilets and sinks. No special tools, glues or crimping are required. You can connect our ball valves with your hands. If you ever need to remove a plumbing fitting you can simply use the ProBite disconnect tool.
|
BrassCraft? 1/2 in nominal push connect inlet x 3/8 in OD compression outlet 1/4-turn straight valve controls water flow to household plumbing fixtures like faucets, toilets, dishwashers, icemakers, washing machines. The straight valve is most often used where the water pipe enters the room from the floor. With a 90 deg turn of the valve handle, you are able to stop the flow of water leading to the plumbing fixture, allowing for maintenance and repair without shutting off the water to the entire home.
|
Sea Tech? 35 Series products are designed and manufactured to be trouble-free for many years of service life. 35 Series products are designed and manufactured in polysulfone, a high-performance thermal plastic material. 35 Series products are available in standard imperial inch sizes and interconnect with all Sea Tech? 24 Series fittings. The Sea Tech? quick-connect design allows for quick and easy connections without installation tools. Simply cut the plastic, copper or CPVC piping and snap a Sea Tech? fitting in place for a zero leak connection.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Sea Tech? 35 Series products are designed and manufactured to be trouble-free for many years of service life. 35 Series products are designed and manufactured in polysulfone, a high-performance thermal plastic material. 35 Series products are available in standard imperial inch sizes and interconnect with all Sea Tech? 24 Series fittings. The Sea Tech? quick-connect design allows for quick and easy connections without installation tools. Simply cut the plastic, copper or CPVC piping and snap a Sea Tech? fitting in place for a zero leak connection.
|
BrassCraft? 1/2 in nominal push connect inlet x 3/8 in OD compression outlet 1/4-turn angle valve controls water flow to household plumbing fixtures like faucets, toilets, dishwashers, icemakers, washing machines. The angle valve is most often used where the water pipe enters the room from the wall. With a 90 deg turn of the valve handle, you are able to stop the flow of water leading to the plumbing fixture, allowing for maintenance and repair without shutting off the water to the entire home. push connect valves are installation ready requiring no special tools, soldering or glue for a water-tight seal.
|
Sea Tech? 35 Series products are designed and manufactured to be trouble-free for many years of service life. 35 Series products are designed and manufactured in polysulfone, a high-performance thermal plastic material. 35 Series products are available in standard imperial inch sizes and interconnect with all Sea Tech? 24 Series fittings. The Sea Tech? quick-connect design allows for quick and easy connections without installation tools. Simply cut the plastic, copper or CPVC piping and snap a Sea Tech? fitting in place for a zero leak connection.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Sea Tech? 35 Series products are designed and manufactured to be trouble-free for many years of service life. 35 Series products are designed and manufactured in polysulfone, a high-performance thermal plastic material. 35 Series products are available in standard imperial inch sizes and interconnect with all Sea Tech? 24 Series fittings. The Sea Tech? quick-connect design allows for quick and easy connections without installation tools. Simply cut the plastic, copper or CPVC piping and snap a Sea Tech? fitting in place for a zero leak connection.
|
SharkBite? angle stops combine push-fit technology with an angle stop quarter turn valve. This allows the valve to control water flow to household plumbing fixtures and provides easy shut-off of water flow for maintenance and repair, if necessary. These valves require no solder, clamps, unions or glue. The push-to-connect end allows you to push on to copper, PEX, CPVC or PE-RT pipe easily. This product can be easily rotated after assembly for easy installation, even in tight spaces.
|
SharkBite? straight stops combine push-fit technology with a straight stop quarter turn valve. This allows the valve to control water flow to household plumbing fixtures and provides easy shut-off of water flow for maintenance and repair, if necessary. These valves require no solder, clamps, unions or glue. The push-to-connect end allows you to push on to copper, PEX, CPVC or PE-RT pipe easily. This product can be easily rotated after assembly for easy installation, even in tight spaces.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Apollo Stop Valve, 1/2 x 3/8 in Connection, Push-Fit x Compression Connection, Temperature Rating: 180 deg F, Body Material: Brass, Chrome
|
5/8 in OD Compression x 3/8 in OD. Valve pushes on to PEX, CPVC or copper, double O-ring seal, safety clip, Use for tight spots, a shorter stub out or finished wall/floor.
|
Sea Tech? 35 Series products are designed and manufactured to be trouble-free for many years of service life. 35 Series products are designed and manufactured in polysulfone, a high-performance thermal plastic material. 35 Series products are available in standard imperial inch sizes and interconnect with all Sea Tech? 24 Series fittings. The Sea Tech? quick-connect design allows for quick and easy connections without installation tools. Simply cut the plastic, copper or CPVC piping and snap a Sea Tech? fitting in place for a zero leak connection.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Featuring solid brass chrome-plated quick lock valves with simple push fit application that connects to copper, CPVC or PEX.
|
Featuring solid brass chrome-plated quick lock valves with simple push fit application that connects to copper, CPVC or PEX.
|
Sea Tech? 35 Series products are designed and manufactured to be trouble-free for many years of service life. 35 Series products are designed and manufactured in polysulfone, a high-performance thermal plastic material. 35 Series products are available in standard imperial inch sizes and interconnect with all Sea Tech? 24 Series fittings. The Sea Tech? quick-connect design allows for quick and easy connections without installation tools. Simply cut the plastic, copper or CPVC piping and snap a Sea Tech? fitting in place for a zero leak connection.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
5/8 x 3/8 in OD. Valve pushes on to PEX, CPVC or copper, double O-ring seal, safety clip, Use for tight spots, a shorter stub out or finished wall/floor.
|
Works with copper, CPVC, Pex, LPDE, MPDE, HDPE and polybutylene tubing in hot and cold water applications. Incorporates stainless steel gripping teeth in the collets, allowing the connectors to interconnect with multiple materials without special tools or tube inserts. Exclusive O-ring guide insures zero-leak connections. Tube orientation can be changed by a simple twist, reducing the amount of tubing required to plumb a water system. Reusable, approved for use behind walls and underground. 1/2 in CTS x 3/8 ODC.
|
Works with copper, CPVC, Pex, LPDE, MPDE, HDPE and polybutylene tubing in hot and cold water applications. Incorporates stainless steel gripping teeth in the collets, allowing the connectors to interconnect with multiple materials without special tools or tube inserts. Exclusive O-ring guide insures zero-leak connections. Tube orientation can be changed by a simple twist, reducing the amount of tubing required to plumb a water system. Reusable, approved for use behind walls and underground.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Sea Tech? 35 Series products are designed and manufactured to be trouble-free for many years of service life. 35 Series products are designed and manufactured in polysulfone, a high-performance thermal plastic material. 35 Series products are available in standard imperial inch sizes and interconnect with all Sea Tech? 24 Series fittings. The Sea Tech? quick-connect design allows for quick and easy connections without installation tools. Simply cut the plastic, copper or CPVC piping and snap a Sea Tech? fitting in place for a zero leak connection.
|
Apollo Stop Valve, 1/2 x 3/8 in Connection, Push-Fit x Compression Connection, Temperature Rating: 180 deg F, Body Material: Brass, Chrome
|
Water supply stop valve with quarter turn brass ball. Used for faucet, water cooler, refrigerator, dishwasher and instantaneous hot water dispenser. Constructed of high copper content brass body, brass stem, crack-resistant brass nuts, brass ferrule, handle or loose key for public access fixtures.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1/2. x 3/8 in OD. Valve pushes on to PEX, CPVC or copper, double O-ring seal, safety clip, Use for tight spots, a shorter stub out or finished wall/floor.
|
Push fit application valve fits 1/2 in CTS, PEX, CPVC.
|
Featuring solid brass chrome-plated quick lock valves with simple push fit application that connects to copper, CPVC or PEX.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Featuring solid brass chrome-plated quick lock valves with simple push fit application that connects to copper, CPVC or PEX.
|
Keeney Quick Lock Valve, 5/8 in Connection, Compression Connection, Number of Ports/Ways: 1, 125 psi, Temperature Rating: 160 deg F, Media: Water, Body Material: Stainless Steel, Includes: Pre-Connected Supply Line
|
Push fit application valve fits 1/2 in CTS, PEX, CPVC.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Includes SharkBite? 1/2 in x 1/4 in (3/8 in OD) push-to-connect angle stop valve, 5 ft coil of 1/4 in PEX tubing, 1/4 in (3/8 in OD) SharkBite? x 7/8 in ballcock swivel toilet connector, 1/2 in and 1/4 in disconnect clip.
|
Keeney Quick Lock Valve, 5/8 in Connection, Compression Connection, Number of Ports/Ways: 1, 125 psi, Temperature Rating: 160 deg F, Media: Water, Body Material: Stainless Steel, Includes: Pre-Connected Supply Line
|
Includes two SharkBite? push connect angle stop, two connectors and two 1/4 x 5 ft PEX tubing.
|
|
|
VIEW MAP & PHOTO GALLERY | CALL US: 406-466-3100
