Home > PLUMBING > ROUGH PLUMBING SUPPLIES > TUBING > PEX TUBING
Sort By:
Go
Page of 2
PIPE PEX-B 1/2IN X 2FT PIPE PEX-B 1/2IN X 2FT PIPE PEX STICK WHT 1/4IN X 5FT
PIPE PEX-B 1/2IN X 2FT
Our Price: $2.79
PIPE PEX-B 1/2IN X 2FT
Our Price: $2.79
Apollo Pipe, Nominal Size: 1/4 in, 5 ft L, Barb Connection, 160 psi, Temperature Rating: 200 deg F, Polyethylene, White
PEXTUBE STICK RED 1/2X 2FT PEXTUBE STICK BLUE 1/2X 2FT PIPE PEX A 1/2IN X 5FT WHITE
SharkBite? PEX pipe is a cross-linked polyethylene pipe for use in a wide range of residential and commercial plumbing applications. Manufactured without an oxygen barrier for potable water systems and with an oxygen barrier for radiant floor and hydronic heating applications. A repeating SharkBite? imprint pattern provides a visual aid to determine if the pipe has been inserted all the way into the SharkBite? push-to-connect fitting. This feature only works if the pipe is cut between the SharkBite? imprint pattern. PEX-A pipe is cross-linked, high-density polyethylene. All Apollo Expansion PEX is available in red, white and blue for easy identification of hot, cold, and main water lines. Apollo uses the high-pressure peroxide method of cross-linking which is also known as PEX-A. Apollo Expansion PEX pipe is produced using the high-pressure peroxide method for crosslinked polyethylene (PEXa) in accordance with ASTM F876, F877, CSA B137.5 and PPI TR-3, and is certified to NSF 14/61 standards. Apollo Expansion PEX pipe also meets the requirements of ASTM F2023 for chlorine resistance. Apollo Expansion PEX pipe is manufactured using a quality management system which has been certified to the latest version of ISO 9001.
Conbraco APPW512 Apollo PIPE PEX-B 1/2IN X 5FT PIPE PEX-B 1/2IN X 5FT
PIPE PEX-B 1/2IN X 5FT
Our Price: $3.49
PIPE PEX-B 1/2IN X 5FT
Our Price: $3.49
Apollo PEX? tubing is cross-linked, high density polyethylene. The silane method, also called the "moisture cure" method, results in PEX-B, where the cross-linking is performed in a secondary post-extrusion process, producing cross-links between a cross-linking agent. The process is accelerated with heat and moisture. The cross-linked bonds are formed through silanol condensation between two grafted vinyltrimethoxysilane (VTMS) units, connecting the polyethylene chains with C-C-Si-O-SiC-C bridges. PEX tubing is for use in hot and cold potable water distribution systems. PEX tubing can also be used in "continuously recirculating" plumbing systems up to 140 deg F while maintaining chlorine resistance. The tubing may be installed in concrete, gypsum based lightweight concrete, sand, asphalt, in or under wood flooring or behind wallboard or plaster.
TUBE PEX WHTE 1/2IN 10FT STICK PEXTUBE STICK BLUE 1/2X 10FT PEXTUBE STICK RED 1/2X 10FT
Watts Pipe, Nominal Size: 1/2 in, 10 ft L, PEX B Connection SharkBite? PEX pipe is a cross-linked polyethylene pipe for use in a wide range of residential and commercial plumbing applications. Manufactured without an oxygen barrier for potable water systems and with an oxygen barrier for radiant floor and hydronic heating applications. A repeating SharkBite? imprint pattern provides a visual aid to determine if the pipe has been inserted all the way into the SharkBite? push-to-connect fitting. This feature only works if the pipe is cut between the SharkBite? imprint pattern. SharkBite? PEX pipe is a cross-linked polyethylene pipe for use in a wide range of residential and commercial plumbing applications. Manufactured without an oxygen barrier for potable water systems and with an oxygen barrier for radiant floor and hydronic heating applications. A repeating SharkBite? imprint pattern provides a visual aid to determine if the pipe has been inserted all the way into the SharkBite? push-to-connect fitting. This feature only works if the pipe is cut between the SharkBite? imprint pattern.
PIPE FLEX PEX-A BLUE 1/2INX5FT PIPE FLEX PEX-A RED 1/2INX5FT Conbraco APPW1012 Apollo
SharkBite Straight Pipe, 1/2 in Nominal, 5/8 in OD, 0.07 in Wall Thickness, 5 ft Length, PEX-A Connection, 160 psi Pressure, 33 to 200 deg F, Polythethylene, Blue, Suitable for: PEX Expansion, Push-To-Connect, Plastic Crimp and Brass Crimp Fittings SharkBite Straight Pipe, 1/2 in Nominal, 5/8 in OD, 0.07 in Wall Thickness, 5 ft Length, PEX-A Connection, 160 psi Pressure, 33 to 200 deg F, Polythethylene, Red, Suitable for: EvoPEX Fittings, PEX Expansion, Push-To-Connect, Plastic Crimp and Brass Crimp Fittings Apollo PEX? tubing is cross-linked, high density polyethylene. The silane method, also called the "moisture cure" method, results in PEX-B, where the cross-linking is performed in a secondary post-extrusion process, producing cross-links between a cross-linking agent. The process is accelerated with heat and moisture. The cross-linked bonds are formed through silanol condensation between two grafted vinyltrimethoxysilane (VTMS) units, connecting the polyethylene chains with C-C-Si-O-SiC-C bridges. PEX tubing is for use in hot and cold potable water distribution systems. PEX tubing can also be used in "continuously recirculating" plumbing systems up to 140 deg F while maintaining chlorine resistance. The tubing may be installed in concrete, gypsum based lightweight concrete, sand, asphalt, in or under wood flooring or behind wallboard or plaster.
Conbraco APPW534 Apollo PIPE PEX-B 3/4IN X 5FT PIPE PEX-B 3/4IN X 5FT
PIPE PEX-B 3/4IN X 5FT
Our Price: $4.59
PIPE PEX-B 3/4IN X 5FT
Our Price: $4.59
Apollo PEX? tubing is cross-linked, high density polyethylene. The silane method, also called the "moisture cure" method, results in PEX-B, where the cross-linking is performed in a secondary post-extrusion process, producing cross-links between a cross-linking agent. The process is accelerated with heat and moisture. The cross-linked bonds are formed through silanol condensation between two grafted vinyltrimethoxysilane (VTMS) units, connecting the polyethylene chains with C-C-Si-O-SiC-C bridges. PEX tubing is for use in hot and cold potable water distribution systems. PEX tubing can also be used in "continuously recirculating" plumbing systems up to 140 deg F while maintaining chlorine resistance. The tubing may be installed in concrete, gypsum based lightweight concrete, sand, asphalt, in or under wood flooring or behind wallboard or plaster.
TUBE PEX WHITE 3/4IN 5FT STICK PIPE FLEX PEX-A BLU 1/2INX10FT PIPE FLEX PEX-A RED 1/2INX10FT
Cross-linked polyethylene pipe approved for use in residential and commercial installations. Has the flexibility to bend around corners, reducing the number of connection points needed. Faster installation compared to rigid pipe. Flexible pipe reduces the number of connection points while reducing cost, time and potential leak points. Freeze-resistant pipe can expand slightly if frozen and contract when thawed. Ideal for hot and cold potable water distribution, fire protection and municipal water service lines. Faster installation compared to rigid pipe. Flexible pipe reduces the number of connection points while reducing cost, time and potential leak points. Freeze-resistant pipe can expand slightly if frozen and contract when thawed. Ideal for hot and cold potable water distribution, fire protection and municipal water service lines.
PIPE PEX-B 3/8IN X 10FT PIPE PEX-B 3/4IN X 2FT PIPE PEX-B 3/4IN X 2FT
PIPE PEX-B 3/8IN X 10FT
Our Price: $5.09
PIPE PEX-B 3/4IN X 2FT
Our Price: $5.09
PIPE PEX-B 3/4IN X 2FT
Our Price: $5.09
PIPE PEX-B 3/4IN X 2FT PIPE PEX 3/4IN X 5FT WHITE Conbraco APPW51 Apollo
PIPE PEX-B 3/4IN X 2FT
Our Price: $5.09
PEX-A pipe is cross-linked, high-density polyethylene. All Apollo Expansion PEX is available in red, white and blue for easy identification of hot, cold, and main water lines. Apollo uses the high-pressure peroxide method of cross-linking which is also known as PEX-A. Apollo Expansion PEX pipe is produced using the high-pressure peroxide method for crosslinked polyethylene (PEXa) in accordance with ASTM F876, F877, CSA B137.5 and PPI TR-3, and is certified to NSF 14/61 standards. Apollo Expansion PEX pipe also meets the requirements of ASTM F2023 for chlorine resistance. Apollo Expansion PEX pipe is manufactured using a quality management system which has been certified to the latest version of ISO 9001. Apollo PEX? tubing is cross-linked, high density polyethylene. The silane method, also called the "moisture cure" method, results in PEX-B, where the cross-linking is performed in a secondary post-extrusion process, producing cross-links between a cross-linking agent. The process is accelerated with heat and moisture. The cross-linked bonds are formed through silanol condensation between two grafted vinyltrimethoxysilane (VTMS) units, connecting the polyethylene chains with C-C-Si-O-SiC-C bridges. PEX tubing is for use in hot and cold potable water distribution systems. PEX tubing can also be used in "continuously recirculating" plumbing systems up to 140 deg F while maintaining chlorine resistance. The tubing may be installed in concrete, gypsum based lightweight concrete, sand, asphalt, in or under wood flooring or behind wallboard or plaster.
U860W20 Straight Pex Tubing Without Oxygen Barrier Conbraco APPB2012 Apollo Conbraco APPR2012 Apollo
Apollo PEX? tubing is cross-linked, high density polyethylene. The silane method, also called the "moisture cure" method, results in PEX-B, where the cross-linking is performed in a secondary post-extrusion process, producing cross-links between a cross-linking agent. The process is accelerated with heat and moisture. The cross-linked bonds are formed through silanol condensation between two grafted vinyltrimethoxysilane (VTMS) units, connecting the polyethylene chains with C-C-Si-O-SiC-C bridges. PEX tubing is for use in hot and cold potable water distribution systems. PEX tubing can also be used in "continuously recirculating" plumbing systems up to 140 deg F while maintaining chlorine resistance. The tubing may be installed in concrete, gypsum based lightweight concrete, sand, asphalt, in or under wood flooring or behind wallboard or plaster. Apollo PEX? tubing is cross-linked, high density polyethylene. The silane method, also called the "moisture cure" method, results in PEX-B, where the cross-linking is performed in a secondary post-extrusion process, producing cross-links between a cross-linking agent. The process is accelerated with heat and moisture. The cross-linked bonds are formed through silanol condensation between two grafted vinyltrimethoxysilane (VTMS) units, connecting the polyethylene chains with C-C-Si-O-SiC-C bridges. PEX tubing is for use in hot and cold potable water distribution systems. PEX tubing can also be used in "continuously recirculating" plumbing systems up to 140 deg F while maintaining chlorine resistance. The tubing may be installed in concrete, gypsum based lightweight concrete, sand, asphalt, in or under wood flooring or behind wallboard or plaster. Apollo PEX? tubing is cross-linked, high density polyethylene. The silane method, also called the "moisture cure" method, results in PEX-B, where the cross-linking is performed in a secondary post-extrusion process, producing cross-links between a cross-linking agent. The process is accelerated with heat and moisture. The cross-linked bonds are formed through silanol condensation between two grafted vinyltrimethoxysilane (VTMS) units, connecting the polyethylene chains with C-C-Si-O-SiC-C bridges. PEX tubing is for use in hot and cold potable water distribution systems. PEX tubing can also be used in "continuously recirculating" plumbing systems up to 140 deg F while maintaining chlorine resistance. The tubing may be installed in concrete, gypsum based lightweight concrete, sand, asphalt, in or under wood flooring or behind wallboard or plaster.
TUBE PEX WHTE 3/4IN 10FT STICK PEX-A TUBING WHITE 1/2INX20FT PEX-A TUBING BLUE 1/2IN X 20FT
SharkBite Pipe, 3/4 in Nominal, 10 ft Length, PEX Connection, Suitable for: Pex B fittings PEX-A pipe is cross-linked, high-density polyethylene. All Apollo Expansion PEX is available in red, white and blue for easy identification of hot, cold, and main water lines. Apollo uses the high-pressure peroxide method of cross-linking which is also known as PEX-A. Apollo Expansion PEX pipe is produced using the high-pressure peroxide method for crosslinked polyethylene (PEXa) in accordance with ASTM F876, F877, CSA B137.5 and PPI TR-3, and is certified to NSF 14/61 standards. Apollo Expansion PEX pipe also meets the requirements of ASTM F2023 for chlorine resistance. Apollo Expansion PEX pipe is manufactured using a quality management system which has been certified to the latest version of ISO 9001. Expansion PEX tubing is cross-linked, high-density polyethylene. It's available in white, red or blue colors for easy identification of hot and cold water lines. The Apollo Expansion PEX tubing listed is type PEX-A (PEX-a, PEXa). PEX tubing is for use in hot and cold potable water distribution systems. PEX tubing can also be used in continuously recirculating plumbing systems up to 140 deg F while maintaining chlorine-resistance.
PEX-A TUBING RED 1/2IN X 20FT Conbraco APPW1034 Apollo PIPE FLEX PEX-A BLU 3/4INX10FT
Expansion PEX tubing is cross-linked, high-density polyethylene. It's available in white, red or blue colors for easy identification of hot and cold water lines. The Apollo Expansion PEX tubing listed is type PEX-A (PEX-a, PEXa). PEX tubing is for use in hot and cold potable water distribution systems. PEX tubing can also be used in continuously recirculating plumbing systems up to 140 deg F while maintaining chlorine-resistance. Apollo PEX? tubing is cross-linked, high density polyethylene. The silane method, also called the "moisture cure" method, results in PEX-B, where the cross-linking is performed in a secondary post-extrusion process, producing cross-links between a cross-linking agent. The process is accelerated with heat and moisture. The cross-linked bonds are formed through silanol condensation between two grafted vinyltrimethoxysilane (VTMS) units, connecting the polyethylene chains with C-C-Si-O-SiC-C bridges. PEX tubing is for use in hot and cold potable water distribution systems. PEX tubing can also be used in "continuously recirculating" plumbing systems up to 140 deg F while maintaining chlorine resistance. The tubing may be installed in concrete, gypsum based lightweight concrete, sand, asphalt, in or under wood flooring or behind wallboard or plaster. Faster installation compared to rigid pipe. Flexible pipe reduces the number of connection points while reducing cost, time and potential leak points. Freeze-resistant pipe can expand slightly if frozen and contract when thawed. Ideal for hot and cold potable water distribution, fire protection and municipal water service lines.
PIPE FLEX PEX-A RED 3/4INX10FT PIPE PEX 1IN X 5FT WHITE Conbraco APPB2034 Apollo
Faster installation compared to rigid pipe. Flexible pipe reduces the number of connection points while reducing cost, time and potential leak points. Freeze-resistant pipe can expand slightly if frozen and contract when thawed. Ideal for hot and cold potable water distribution, fire protection and municipal water service lines. PEX-A pipe is cross-linked, high-density polyethylene. All Apollo Expansion PEX is available in red, white and blue for easy identification of hot, cold, and main water lines. Apollo uses the high-pressure peroxide method of cross-linking which is also known as PEX-A. Apollo Expansion PEX pipe is produced using the high-pressure peroxide method for crosslinked polyethylene (PEXa) in accordance with ASTM F876, F877, CSA B137.5 and PPI TR-3, and is certified to NSF 14/61 standards. Apollo Expansion PEX pipe also meets the requirements of ASTM F2023 for chlorine resistance. Apollo Expansion PEX pipe is manufactured using a quality management system which has been certified to the latest version of ISO 9001. Apollo PEX? tubing is cross-linked, high density polyethylene. The silane method, also called the "moisture cure" method, results in PEX-B, where the cross-linking is performed in a secondary post-extrusion process, producing cross-links between a cross-linking agent. The process is accelerated with heat and moisture. The cross-linked bonds are formed through silanol condensation between two grafted vinyltrimethoxysilane (VTMS) units, connecting the polyethylene chains with C-C-Si-O-SiC-C bridges. PEX tubing is for use in hot and cold potable water distribution systems. PEX tubing can also be used in "continuously recirculating" plumbing systems up to 140 deg F while maintaining chlorine resistance. The tubing may be installed in concrete, gypsum based lightweight concrete, sand, asphalt, in or under wood flooring or behind wallboard or plaster.
Conbraco APPR2034 Apollo PIPE PEX COIL WHT 3/4IN X 25FT PIPE FLEX PEX-A WHITE 1INX10FT
Apollo PEX? tubing is cross-linked, high density polyethylene. The silane method, also called the "moisture cure" method, results in PEX-B, where the cross-linking is performed in a secondary post-extrusion process, producing cross-links between a cross-linking agent. The process is accelerated with heat and moisture. The cross-linked bonds are formed through silanol condensation between two grafted vinyltrimethoxysilane (VTMS) units, connecting the polyethylene chains with C-C-Si-O-SiC-C bridges. PEX tubing is for use in hot and cold potable water distribution systems. PEX tubing can also be used in "continuously recirculating" plumbing systems up to 140 deg F while maintaining chlorine resistance. The tubing may be installed in concrete, gypsum based lightweight concrete, sand, asphalt, in or under wood flooring or behind wallboard or plaster. Apollo PEX tubing is cross-linked, high-density polyethylene and is available for potable water distribution systems in red, white and blue colors for easy identification of hot, cold and main water lines. Apollo PEX can be used in continuously recirculating plumbing systems up to 140 deg F while maintaining chlorine resistance. Faster installation compared to rigid pipe. Flexible pipe reduces the number of connection points while reducing cost, time and potential leak points. Freeze-resistant pipe can expand slightly if frozen and contract when thawed. Ideal for hot and cold potable water distribution, fire protection and municipal water service lines.
PEX-A TUBING WHITE 3/4INX20FT PEX-A TUBING BLUE 3/4IN X 20FT PEX-A TUBING RED 3/4IN X 20FT
PEX-A pipe is cross-linked, high-density polyethylene. All Apollo Expansion PEX is available in red, white and blue for easy identification of hot, cold, and main water lines. Apollo uses the high-pressure peroxide method of cross-linking which is also known as PEX-A. Apollo Expansion PEX pipe is produced using the high-pressure peroxide method for crosslinked polyethylene (PEXa) in accordance with ASTM F876, F877, CSA B137.5 and PPI TR-3, and is certified to NSF 14/61 standards. Apollo Expansion PEX pipe also meets the requirements of ASTM F2023 for chlorine resistance. Apollo Expansion PEX pipe is manufactured using a quality management system which has been certified to the latest version of ISO 9001. Expansion PEX tubing is cross-linked, high-density polyethylene. It's available in white, red or blue colors for easy identification of hot and cold water lines. The Apollo Expansion PEX tubing listed is type PEX-A (PEX-a, PEXa). PEX tubing is for use in hot and cold potable water distribution systems. PEX tubing can also be used in continuously recirculating plumbing systems up to 140 deg F while maintaining chlorine-resistance. Expansion PEX tubing is cross-linked, high-density polyethylene. It's available in white, red or blue colors for easy identification of hot and cold water lines. The Apollo Expansion PEX tubing listed is type PEX-A (PEX-a, PEXa). PEX tubing is for use in hot and cold potable water distribution systems. PEX tubing can also be used in continuously recirculating plumbing systems up to 140 deg F while maintaining chlorine-resistance.
TUBE PEX WHITE 1/2IN 50FT COIL PEX-A TUBING WHITE 1IN X 20FT Conbraco APPB10012 Apollo
Cross-linked polyethylene pipe approved for use in residential and commercial installations. Has the flexibility to bend around corners, reducing the number of connection points needed. PEX-A pipe is cross-linked, high-density polyethylene. All Apollo Expansion PEX is available in red, white and blue for easy identification of hot, cold, and main water lines. Apollo uses the high-pressure peroxide method of cross-linking which is also known as PEX-A. Apollo Expansion PEX pipe is produced using the high-pressure peroxide method for crosslinked polyethylene (PEXa) in accordance with ASTM F876, F877, CSA B137.5 and PPI TR-3, and is certified to NSF 14/61 standards. Apollo Expansion PEX pipe also meets the requirements of ASTM F2023 for chlorine resistance. Apollo Expansion PEX pipe is manufactured using a quality management system which has been certified to the latest version of ISO 9001. Apollo PEX? tubing is cross-linked, high density polyethylene. The silane method, also called the "moisture cure" method, results in PEX-B, where the cross-linking is performed in a secondary post-extrusion process, producing cross-links between a cross-linking agent. The process is accelerated with heat and moisture. The cross-linked bonds are formed through silanol condensation between two grafted vinyltrimethoxysilane (VTMS) units, connecting the polyethylene chains with C-C-Si-O-SiC-C bridges. PEX tubing is for use in hot and cold potable water distribution systems. PEX tubing can also be used in "continuously recirculating" plumbing systems up to 140 deg F while maintaining chlorine resistance. The tubing may be installed in concrete, gypsum based lightweight concrete, sand, asphalt, in or under wood flooring or behind wallboard or plaster.
Conbraco APPR10012 Apollo Conbraco APPW10012 Apollo Conbraco APPW538 Apollo
Apollo PEX? tubing is cross-linked, high density polyethylene. The silane method, also called the "moisture cure" method, results in PEX-B, where the cross-linking is performed in a secondary post-extrusion process, producing cross-links between a cross-linking agent. The process is accelerated with heat and moisture. The cross-linked bonds are formed through silanol condensation between two grafted vinyltrimethoxysilane (VTMS) units, connecting the polyethylene chains with C-C-Si-O-SiC-C bridges. PEX tubing is for use in hot and cold potable water distribution systems. PEX tubing can also be used in "continuously recirculating" plumbing systems up to 140 deg F while maintaining chlorine resistance. The tubing may be installed in concrete, gypsum based lightweight concrete, sand, asphalt, in or under wood flooring or behind wallboard or plaster. Apollo PEX? tubing is cross-linked, high density polyethylene. The silane method, also called the "moisture cure" method, results in PEX-B, where the cross-linking is performed in a secondary post-extrusion process, producing cross-links between a cross-linking agent. The process is accelerated with heat and moisture. The cross-linked bonds are formed through silanol condensation between two grafted vinyltrimethoxysilane (VTMS) units, connecting the polyethylene chains with C-C-Si-O-SiC-C bridges. PEX tubing is for use in hot and cold potable water distribution systems. PEX tubing can also be used in "continuously recirculating" plumbing systems up to 140 deg F while maintaining chlorine resistance. The tubing may be installed in concrete, gypsum based lightweight concrete, sand, asphalt, in or under wood flooring or behind wallboard or plaster. Apollo PEX? tubing is cross-linked, high density polyethylene. The silane method, also called the "moisture cure" method, results in PEX-B, where the cross-linking is performed in a secondary post-extrusion process, producing cross-links between a cross-linking agent. The process is accelerated with heat and moisture. The cross-linked bonds are formed through silanol condensation between two grafted vinyltrimethoxysilane (VTMS) units, connecting the polyethylene chains with C-C-Si-O-SiC-C bridges. PEX tubing is for use in hot and cold potable water distribution systems. PEX tubing can also be used in "continuously recirculating" plumbing systems up to 140 deg F while maintaining chlorine resistance. The tubing may be installed in concrete, gypsum based lightweight concrete, sand, asphalt, in or under wood flooring or behind wallboard or plaster.
PIPE PEX A 1/2IN X 100FT RED PIPE PEX A 1/2IN X 100FT BLUE PIPE PEX A 1/2IN X 100FT WHITE
PEX-A tubing is cross-linked, high-density polyethylene. All Apollo? Expansion PEX is opaque in color and ensures easy identification of hot, cold and main water lines through different colored print lines. Apollo? Expansion PEX pipe is produced using the high-pressure peroxide method for crosslinked polyethylene (PEXa) in accordance with ASTM F876, F877, CSA B137.5 and PPI TR-3 and is certified to NSF 14/61 standards. Apollo? Expansion PEX pipe also meets the requirements of ASTM F2023 for chlorine resistance. Apollo? Expansion PEX pipe is manufactured using a quality management system which has been certified to the latest version of ISO 9001. Use of Apollo? Expansion PEX pipe in heating systems requires corrosion protection and/or isolation by using a heat exchanger or non-ferrous components throughout the system. PEX-A tubing is cross-linked, high-density polyethylene. All Apollo? Expansion PEX is opaque in color and ensures easy identification of hot, cold and main water lines through different colored print lines. Apollo? Expansion PEX pipe is produced using the high-pressure peroxide method for crosslinked polyethylene (PEXa) in accordance with ASTM F876, F877, CSA B137.5 and PPI TR-3 and is certified to NSF 14/61 standards. Apollo? Expansion PEX pipe also meets the requirements of ASTM F2023 for chlorine resistance. Apollo? Expansion PEX pipe is manufactured using a quality management system which has been certified to the latest version of ISO 9001. Use of Apollo? Expansion PEX pipe in heating systems requires corrosion protection and/or isolation by using a heat exchanger or non-ferrous components throughout the system. PEX-A pipe is cross-linked, high-density polyethylene. All Apollo Expansion PEX is available in red, white and blue for easy identification of hot, cold, and main water lines. Apollo uses the high-pressure peroxide method of cross-linking which is also known as PEX-A. Apollo Expansion PEX pipe is produced using the high-pressure peroxide method for crosslinked polyethylene (PEXa) in accordance with ASTM F876, F877, CSA B137.5 and PPI TR-3, and is certified to NSF 14/61 standards. Apollo Expansion PEX pipe also meets the requirements of ASTM F2023 for chlorine resistance. Apollo Expansion PEX pipe is manufactured using a quality management system which has been certified to the latest version of ISO 9001.
PIPE FLX PEX-A BLU 1/2INX100FT PIPE FLX PEX-A RED 1/2INX100FT APPR2012 Straight Pex Tubing
Faster installation compared to rigid pipe. Flexibility to bend pipe around corners. Available in coils up to 100 ft in length, allowing longer runs and fewer connections while reducing cost, time and potential leak points. Freeze-resistant pipe can expand slightly if frozen and contract when thawed. Ideal for hot and cold potable water distribution, fire protection and municipal water service lines. Faster installation compared to rigid pipe. Flexibility to bend pipe around corners. Available in coils up to 100 ft in length, allowing longer runs and fewer connections while reducing cost, time and potential leak points. Freeze-resistant pipe can expand slightly if frozen and contract when thawed. Ideal for hot and cold potable water distribution, fire protection and municipal water service lines. Apollo PEX? tubing is cross-linked, high density polyethylene. The silane method, also called the "moisture cure" method, results in PEX-B, where the cross-linking is performed in a secondary post-extrusion process, producing cross-links between a cross-linking agent. The process is accelerated with heat and moisture. The cross-linked bonds are formed through silanol condensation between two grafted vinyltrimethoxysilane (VTMS) units, connecting the polyethylene chains with C-C-Si-O-SiC-C bridges. PEX tubing is for use in hot and cold potable water distribution systems. PEX tubing can also be used in "continuously recirculating" plumbing systems up to 140 deg F while maintaining chlorine resistance. The tubing may be installed in concrete, gypsum based lightweight concrete, sand, asphalt, in or under wood flooring or behind wallboard or plaster.
Sharkbite APPB2012 Straight Pex Tubing Conbraco APPB10034 Apollo Conbraco APPR10034 Apollo
Apollo PEX? tubing is cross-linked, high density polyethylene. The silane method, also called the "moisture cure" method, results in PEX-B, where the cross-linking is performed in a secondary post-extrusion process, producing cross-links between a cross-linking agent. The process is accelerated with heat and moisture. The cross-linked bonds are formed through silanol condensation between two grafted vinyltrimethoxysilane (VTMS) units, connecting the polyethylene chains with C-C-Si-O-SiC-C bridges. PEX tubing is for use in hot and cold potable water distribution systems. PEX tubing can also be used in "continuously recirculating" plumbing systems up to 140 deg F while maintaining chlorine resistance. The tubing may be installed in concrete, gypsum based lightweight concrete, sand, asphalt, in or under wood flooring or behind wallboard or plaster. Apollo PEX? tubing is cross-linked, high density polyethylene. The silane method, also called the "moisture cure" method, results in PEX-B, where the cross-linking is performed in a secondary post-extrusion process, producing cross-links between a cross-linking agent. The process is accelerated with heat and moisture. The cross-linked bonds are formed through silanol condensation between two grafted vinyltrimethoxysilane (VTMS) units, connecting the polyethylene chains with C-C-Si-O-SiC-C bridges. PEX tubing is for use in hot and cold potable water distribution systems. PEX tubing can also be used in "continuously recirculating" plumbing systems up to 140 deg F while maintaining chlorine resistance. The tubing may be installed in concrete, gypsum based lightweight concrete, sand, asphalt, in or under wood flooring or behind wallboard or plaster. Apollo PEX? tubing is cross-linked, high density polyethylene. The silane method, also called the "moisture cure" method, results in PEX-B, where the cross-linking is performed in a secondary post-extrusion process, producing cross-links between a cross-linking agent. The process is accelerated with heat and moisture. The cross-linked bonds are formed through silanol condensation between two grafted vinyltrimethoxysilane (VTMS) units, connecting the polyethylene chains with C-C-Si-O-SiC-C bridges. PEX tubing is for use in hot and cold potable water distribution systems. PEX tubing can also be used in "continuously recirculating" plumbing systems up to 140 deg F while maintaining chlorine resistance. The tubing may be installed in concrete, gypsum based lightweight concrete, sand, asphalt, in or under wood flooring or behind wallboard or plaster.
Conbraco APPW10034 Apollo PIPE PEX A 3/4IN X 100FT WHITE PIPE PEX A 3/4IN X 100FT RED
Apollo PEX? tubing is cross-linked, high density polyethylene. The silane method, also called the "moisture cure" method, results in PEX-B, where the cross-linking is performed in a secondary post-extrusion process, producing cross-links between a cross-linking agent. The process is accelerated with heat and moisture. The cross-linked bonds are formed through silanol condensation between two grafted vinyltrimethoxysilane (VTMS) units, connecting the polyethylene chains with C-C-Si-O-SiC-C bridges. PEX tubing is for use in hot and cold potable water distribution systems. PEX tubing can also be used in "continuously recirculating" plumbing systems up to 140 deg F while maintaining chlorine resistance. The tubing may be installed in concrete, gypsum based lightweight concrete, sand, asphalt, in or under wood flooring or behind wallboard or plaster. PEX-A pipe is cross-linked, high-density polyethylene. All Apollo Expansion PEX is available in red, white and blue for easy identification of hot, cold, and main water lines. Apollo uses the high-pressure peroxide method of cross-linking which is also known as PEX-A. Apollo Expansion PEX pipe is produced using the high-pressure peroxide method for crosslinked polyethylene (PEXa) in accordance with ASTM F876, F877, CSA B137.5 and PPI TR-3, and is certified to NSF 14/61 standards. Apollo Expansion PEX pipe also meets the requirements of ASTM F2023 for chlorine resistance. Apollo Expansion PEX pipe is manufactured using a quality management system which has been certified to the latest version of ISO 9001. PEX-A tubing is cross-linked, high-density polyethylene. All Apollo? Expansion PEX is Red in color and ensures easy identification of hot, cold and main water lines through different colored print lines. Apollo? Expansion PEX pipe is produced using the high-pressure peroxide method for crosslinked polyethylene (PEXa) in accordance with ASTM F876, F877, CSA B137.5 and PPI TR-3 and is certified to NSF 14/61 standards. Apollo? Expansion PEX pipe also meets the requirements of ASTM F2023 for chlorine resistance. Apollo? Expansion PEX pipe is manufactured using a quality management system which has been certified to the latest version of ISO 9001. Use of Apollo? Expansion PEX pipe in heating systems requires corrosion protection and/or isolation by using a heat exchanger or non-ferrous components throughout the system.
PIPE PEXA 3/4IN X 100FT BLUE PIPE FLX PEX-A BLU 3/4INX100FT PIPE FLX PEX-A RED 3/4INX100FT
PEX-A tubing is cross-linked, high-density polyethylene. All Apollo? Expansion PEX is opaque in color and ensures easy identification of hot, cold and main water lines through different colored print lines. Apollo? Expansion PEX pipe is produced using the high-pressure peroxide method for crosslinked polyethylene (PEXa) in accordance with ASTM F876, F877, CSA B137.5 and PPI TR-3 and is certified to NSF 14/61 standards. Apollo? Expansion PEX pipe also meets the requirements of ASTM F2023 for chlorine resistance. Apollo? Expansion PEX pipe is manufactured using a quality management system which has been certified to the latest version of ISO 9001. Use of Apollo? Expansion PEX pipe in heating systems requires corrosion protection and/or isolation by using a heat exchanger or non-ferrous components throughout the system. Faster installation compared to rigid pipe. Flexibility to bend pipe around corners. Available in coils up to 100 ft in length, allowing longer runs and fewer connections while reducing cost, time and potential leak points. Freeze-resistant pipe can expand slightly if frozen and contract when thawed. Ideal for hot and cold potable water distribution, fire protection and municipal water service lines. Faster installation compared to rigid pipe. Flexibility to bend pipe around corners. Available in coils up to 100 ft in length, allowing longer runs and fewer connections while reducing cost, time and potential leak points. Freeze-resistant pipe can expand slightly if frozen and contract when thawed. Ideal for hot and cold potable water distribution, fire protection and municipal water service lines.
Conbraco APPW1001 Apollo PIPE PEX-B WHITE 1IN X 100FT PIPE PEX 1/2INCHX300FOOT WHITE
Apollo PEX? tubing is cross-linked, high density polyethylene. The silane method, also called the "moisture cure" method, results in PEX-B, where the cross-linking is performed in a secondary post-extrusion process, producing cross-links between a cross-linking agent. The process is accelerated with heat and moisture. The cross-linked bonds are formed through silanol condensation between two grafted vinyltrimethoxysilane (VTMS) units, connecting the polyethylene chains with C-C-Si-O-SiC-C bridges. PEX tubing is for use in hot and cold potable water distribution systems. PEX tubing can also be used in "continuously recirculating" plumbing systems up to 140 deg F while maintaining chlorine resistance. The tubing may be installed in concrete, gypsum based lightweight concrete, sand, asphalt, in or under wood flooring or behind wallboard or plaster. Cross-linked polyethylene pipe approved for use in residential and commercial installations. Has the flexibility to bend around corners, reducing the number of connection points needed. Apollo PEX? tubing is cross-linked, high density polyethylene. The silane method, also called the "moisture cure" method, results in PEX-B, where the cross-linking is performed in a secondary post-extrusion process, producing cross-links between a cross-linking agent. The process is accelerated with heat and moisture. The cross-linked bonds are formed through silanol condensation between two grafted vinyltrimethoxysilane (VTMS) units, connecting the polyethylene chains with C-C-Si-O-SiC-C bridges. PEX tubing is for use in hot and cold potable water distribution systems. PEX tubing can also be used in "continuously recirculating" plumbing systems up to 140 deg F while maintaining chlorine resistance. The tubing may be installed in concrete, gypsum based lightweight concrete, sand, asphalt, in or under wood flooring or behind wallboard or plaster.
CONBRACO APPB30012 CONBRACO APPR30012 U870R10 Straight Pex Tubing Without Oxygen Barrier
Apollo PEX? tubing is cross-linked, high density polyethylene. The silane method, also called the "moisture cure" method, results in PEX-B, where the cross-linking is performed in a secondary post-extrusion process, producing cross-links between a cross-linking agent. The process is accelerated with heat and moisture. The cross-linked bonds are formed through silanol condensation between two grafted vinyltrimethoxysilane (VTMS) units, connecting the polyethylene chains with C-C-Si-O-SiC-C bridges. PEX tubing is for use in hot and cold potable water distribution systems. PEX tubing can also be used in "continuously recirculating" plumbing systems up to 140 deg F while maintaining chlorine resistance. The tubing may be installed in concrete, gypsum based lightweight concrete, sand, asphalt, in or under wood flooring or behind wallboard or plaster. Apollo PEX? tubing is cross-linked, high density polyethylene. The silane method, also called the "moisture cure" method, results in PEX-B, where the cross-linking is performed in a secondary post-extrusion process, producing cross-links between a cross-linking agent. The process is accelerated with heat and moisture. The cross-linked bonds are formed through silanol condensation between two grafted vinyltrimethoxysilane (VTMS) units, connecting the polyethylene chains with C-C-Si-O-SiC-C bridges. PEX tubing is for use in hot and cold potable water distribution systems. PEX tubing can also be used in "continuously recirculating" plumbing systems up to 140 deg F while maintaining chlorine resistance. The tubing may be installed in concrete, gypsum based lightweight concrete, sand, asphalt, in or under wood flooring or behind wallboard or plaster. Apollo PEX? tubing is cross-linked, high density polyethylene. The silane method, also called the "moisture cure" method, results in PEX-B, where the cross-linking is performed in a secondary post-extrusion process, producing cross-links between a cross-linking agent. The process is accelerated with heat and moisture. The cross-linked bonds are formed through silanol condensation between two grafted vinyltrimethoxysilane (VTMS) units, connecting the polyethylene chains with C-C-Si-O-SiC-C bridges. PEX tubing is for use in hot and cold potable water distribution systems. PEX tubing can also be used in "continuously recirculating" plumbing systems up to 140 deg F while maintaining chlorine resistance. The tubing may be installed in concrete, gypsum based lightweight concrete, sand, asphalt, in or under wood flooring or behind wallboard or plaster.
Sharkbite U870B10 Straight Pex Tubing Without Oxygen Barrier Conbraco APPOB10034 Apollo Conbraco APPB1001 Apollo
Apollo PEX? tubing is cross-linked, high density polyethylene. The silane method, also called the "moisture cure" method, results in PEX-B, where the cross-linking is performed in a secondary post-extrusion process, producing cross-links between a cross-linking agent. The process is accelerated with heat and moisture. The cross-linked bonds are formed through silanol condensation between two grafted vinyltrimethoxysilane (VTMS) units, connecting the polyethylene chains with C-C-Si-O-SiC-C bridges. PEX tubing is for use in hot and cold potable water distribution systems. PEX tubing can also be used in "continuously recirculating" plumbing systems up to 140 deg F while maintaining chlorine resistance. The tubing may be installed in concrete, gypsum based lightweight concrete, sand, asphalt, in or under wood flooring or behind wallboard or plaster. Oxygen Barrier PEX tubing has been designed to prevent diffusion of oxygen into hydronic radiant heating systems. A layer of polymer is laminated to the outside surface which is highly resistant to the passage of oxygen. Oxygen Barrier PEX tubing is good for hydronic radiant heating, cooling and snow melting systems using water or water/glycol mix. The tubing may be installed in concrete, gypsum based lightweight concrete, sand, asphalt, in or under wood flooring or behind wallboard or plaster. Oxygen barrier PEX tubing may also be used as transfer lines for baseboard heating systems with a maximum operating temperature of 200 deg F at 100 psi. Apollo PEX? tubing is cross-linked, high density polyethylene. The silane method, also called the "moisture cure" method, results in PEX-B, where the cross-linking is performed in a secondary post-extrusion process, producing cross-links between a cross-linking agent. The process is accelerated with heat and moisture. The cross-linked bonds are formed through silanol condensation between two grafted vinyltrimethoxysilane (VTMS) units, connecting the polyethylene chains with C-C-Si-O-SiC-C bridges. PEX tubing is for use in hot and cold potable water distribution systems. PEX tubing can also be used in "continuously recirculating" plumbing systems up to 140 deg F while maintaining chlorine resistance. The tubing may be installed in concrete, gypsum based lightweight concrete, sand, asphalt, in or under wood flooring or behind wallboard or plaster.
Conbraco APPR1001 Apollo PIPE PEX A 1/2IN X 300FT WHITE PIPE PEX A 1/2IN X 300FT BLUE
Apollo PEX? tubing is cross-linked, high density polyethylene. The silane method, also called the "moisture cure" method, results in PEX-B, where the cross-linking is performed in a secondary post-extrusion process, producing cross-links between a cross-linking agent. The process is accelerated with heat and moisture. The cross-linked bonds are formed through silanol condensation between two grafted vinyltrimethoxysilane (VTMS) units, connecting the polyethylene chains with C-C-Si-O-SiC-C bridges. PEX tubing is for use in hot and cold potable water distribution systems. PEX tubing can also be used in "continuously recirculating" plumbing systems up to 140 deg F while maintaining chlorine resistance. The tubing may be installed in concrete, gypsum based lightweight concrete, sand, asphalt, in or under wood flooring or behind wallboard or plaster. PEX-A pipe is cross-linked, high-density polyethylene. All Apollo Expansion PEX is available in red, white and blue for easy identification of hot, cold, and main water lines. Apollo uses the high-pressure peroxide method of cross-linking which is also known as PEX-A. Apollo Expansion PEX pipe is produced using the high-pressure peroxide method for crosslinked polyethylene (PEXa) in accordance with ASTM F876, F877, CSA B137.5 and PPI TR-3, and is certified to NSF 14/61 standards. Apollo Expansion PEX pipe also meets the requirements of ASTM F2023 for chlorine resistance. Apollo Expansion PEX pipe is manufactured using a quality management system which has been certified to the latest version of ISO 9001. PEX-A tubing is cross-linked, high-density polyethylene. All Apollo? Expansion PEX is opaque in color and ensures easy identification of hot, cold and main water lines through different colored print lines. Apollo? Expansion PEX pipe is produced using the high-pressure peroxide method for crosslinked polyethylene (PEXa) in accordance with ASTM F876, F877, CSA B137.5 and PPI TR-3 and is certified to NSF 14/61 standards. Apollo? Expansion PEX pipe also meets the requirements of ASTM F2023 for chlorine resistance. Apollo? Expansion PEX pipe is manufactured using a quality management system which has been certified to the latest version of ISO 9001. Use of Apollo? Expansion PEX pipe in heating systems requires corrosion protection and/or isolation by using a heat exchanger or non-ferrous components throughout the system.
PIPE PEX A 1/2IN X 300FT RED PIPE PEX 1/2INCHX500FOOT BLUE PIPE PEX 1/2INCH X 500FOOT RED
PEX-A tubing is cross-linked, high-density polyethylene. All Apollo? Expansion PEX is opaque in color and ensures easy identification of hot, cold and main water lines through different colored print lines. Apollo? Expansion PEX pipe is produced using the high-pressure peroxide method for crosslinked polyethylene (PEXa) in accordance with ASTM F876, F877, CSA B137.5 and PPI TR-3 and is certified to NSF 14/61 standards. Apollo? Expansion PEX pipe also meets the requirements of ASTM F2023 for chlorine resistance. Apollo? Expansion PEX pipe is manufactured using a quality management system which has been certified to the latest version of ISO 9001. Use of Apollo? Expansion PEX pipe in heating systems requires corrosion protection and/or isolation by using a heat exchanger or non-ferrous components throughout the system. Apollo PEX? tubing is cross-linked, high density polyethylene. The silane method, also called the "moisture cure" method, results in PEX-B, where the cross-linking is performed in a secondary post-extrusion process, producing cross-links between a cross-linking agent. The process is accelerated with heat and moisture. The cross-linked bonds are formed through silanol condensation between two grafted vinyltrimethoxysilane (VTMS) units, connecting the polyethylene chains with C-C-Si-O-SiC-C bridges. PEX tubing is for use in hot and cold potable water distribution systems. PEX tubing can also be used in "continuously recirculating" plumbing systems up to 140 deg F while maintaining chlorine resistance. The tubing may be installed in concrete, gypsum based lightweight concrete, sand, asphalt, in or under wood flooring or behind wallboard or plaster. Apollo PEX? tubing is cross-linked, high density polyethylene. The silane method, also called the "moisture cure" method, results in PEX-B, where the cross-linking is performed in a secondary post-extrusion process, producing cross-links between a cross-linking agent. The process is accelerated with heat and moisture. The cross-linked bonds are formed through silanol condensation between two grafted vinyltrimethoxysilane (VTMS) units, connecting the polyethylene chains with C-C-Si-O-SiC-C bridges. PEX tubing is for use in hot and cold potable water distribution systems. PEX tubing can also be used in "continuously recirculating" plumbing systems up to 140 deg F while maintaining chlorine resistance. The tubing may be installed in concrete, gypsum based lightweight concrete, sand, asphalt, in or under wood flooring or behind wallboard or plaster.
PIPE PEX 1/2INCHX500FOOT WHITE PIPE PEX A 1IN X 100FT WHITE Conbraco APPOB30012 Apollo
Apollo PEX? tubing is cross-linked, high density polyethylene. The silane method, also called the "moisture cure" method, results in PEX-B, where the cross-linking is performed in a secondary post-extrusion process, producing cross-links between a cross-linking agent. The process is accelerated with heat and moisture. The cross-linked bonds are formed through silanol condensation between two grafted vinyltrimethoxysilane (VTMS) units, connecting the polyethylene chains with C-C-Si-O-SiC-C bridges. PEX tubing is for use in hot and cold potable water distribution systems. PEX tubing can also be used in "continuously recirculating" plumbing systems up to 140 deg F while maintaining chlorine resistance. The tubing may be installed in concrete, gypsum based lightweight concrete, sand, asphalt, in or under wood flooring or behind wallboard or plaster. PEX-A pipe is cross-linked, high-density polyethylene. All Apollo Expansion PEX is available in red, white and blue for easy identification of hot, cold, and main water lines. Apollo uses the high-pressure peroxide method of cross-linking which is also known as PEX-A. Apollo Expansion PEX pipe is produced using the high-pressure peroxide method for crosslinked polyethylene (PEXa) in accordance with ASTM F876, F877, CSA B137.5 and PPI TR-3, and is certified to NSF 14/61 standards. Apollo Expansion PEX pipe also meets the requirements of ASTM F2023 for chlorine resistance. Apollo Expansion PEX pipe is manufactured using a quality management system which has been certified to the latest version of ISO 9001. Oxygen Barrier PEX tubing has been designed to prevent diffusion of oxygen into hydronic radiant heating systems. A layer of polymer is laminated to the outside surface which is highly resistant to the passage of oxygen. Oxygen Barrier PEX tubing is good for hydronic radiant heating, cooling and snow melting systems using water or water/glycol mix. The tubing may be installed in concrete, gypsum based lightweight concrete, sand, asphalt, in or under wood flooring or behind wallboard or plaster. Oxygen barrier PEX tubing may also be used as transfer lines for baseboard heating systems with a maximum operating temperature of 200 deg F at 100 psi.
Conbraco APPR30034 PIPE PEX 3/4INCHX300FOOT WHITE Conbraco APPB30034
Apollo PEX? tubing is cross-linked, high density polyethylene. The silane method, also called the "moisture cure" method, results in PEX-B, where the cross-linking is performed in a secondary post-extrusion process, producing cross-links between a cross-linking agent. The process is accelerated with heat and moisture. The cross-linked bonds are formed through silanol condensation between two grafted vinyltrimethoxysilane (VTMS) units, connecting the polyethylene chains with C-C-Si-O-SiC-C bridges. PEX tubing is for use in hot and cold potable water distribution systems. PEX tubing can also be used in "continuously recirculating" plumbing systems up to 140 deg F while maintaining chlorine resistance. The tubing may be installed in concrete, gypsum based lightweight concrete, sand, asphalt, in or under wood flooring or behind wallboard or plaster. Apollo PEX? tubing is cross-linked, high density polyethylene. The silane method, also called the "moisture cure" method, results in PEX-B, where the cross-linking is performed in a secondary post-extrusion process, producing cross-links between a cross-linking agent. The process is accelerated with heat and moisture. The cross-linked bonds are formed through silanol condensation between two grafted vinyltrimethoxysilane (VTMS) units, connecting the polyethylene chains with C-C-Si-O-SiC-C bridges. PEX tubing is for use in hot and cold potable water distribution systems. PEX tubing can also be used in "continuously recirculating" plumbing systems up to 140 deg F while maintaining chlorine resistance. The tubing may be installed in concrete, gypsum based lightweight concrete, sand, asphalt, in or under wood flooring or behind wallboard or plaster. Apollo PEX? tubing is cross-linked, high density polyethylene. The silane method, also called the "moisture cure" method, results in PEX-B, where the cross-linking is performed in a secondary post-extrusion process, producing cross-links between a cross-linking agent. The process is accelerated with heat and moisture. The cross-linked bonds are formed through silanol condensation between two grafted vinyltrimethoxysilane (VTMS) units, connecting the polyethylene chains with C-C-Si-O-SiC-C bridges. PEX tubing is for use in hot and cold potable water distribution systems. PEX tubing can also be used in "continuously recirculating" plumbing systems up to 140 deg F while maintaining chlorine resistance. The tubing may be installed in concrete, gypsum based lightweight concrete, sand, asphalt, in or under wood flooring or behind wallboard or plaster.
PIPE PEX-B BLUE 3/4IN X 300FT U870W20 Straight Pex Tubing Without Oxygen Barrier PIPE PEX A 3/4IN X 300FT BLUE
SharkBite Pipe, Nominal Size: 3/4 in, 7/8 in Dia Outside, 300 ft L, PEX Connection, 80 to 160 psi, Temperature Rating: 33 to 200 deg F, Polyethylene, Blue Apollo PEX? tubing is cross-linked, high density polyethylene. The silane method, also called the "moisture cure" method, results in PEX-B, where the cross-linking is performed in a secondary post-extrusion process, producing cross-links between a cross-linking agent. The process is accelerated with heat and moisture. The cross-linked bonds are formed through silanol condensation between two grafted vinyltrimethoxysilane (VTMS) units, connecting the polyethylene chains with C-C-Si-O-SiC-C bridges. PEX tubing is for use in hot and cold potable water distribution systems. PEX tubing can also be used in "continuously recirculating" plumbing systems up to 140 deg F while maintaining chlorine resistance. The tubing may be installed in concrete, gypsum based lightweight concrete, sand, asphalt, in or under wood flooring or behind wallboard or plaster. PEX-A tubing is cross-linked, high-density polyethylene. All Apollo? Expansion PEX is opaque in color and ensures easy identification of hot, cold and main water lines through different colored print lines. Apollo? Expansion PEX pipe is produced using the high-pressure peroxide method for crosslinked polyethylene (PEXa) in accordance with ASTM F876, F877, CSA B137.5 and PPI TR-3 and is certified to NSF 14/61 standards. Apollo? Expansion PEX pipe also meets the requirements of ASTM F2023 for chlorine resistance. Apollo? Expansion PEX pipe is manufactured using a quality management system which has been certified to the latest version of ISO 9001. Use of Apollo? Expansion PEX pipe in heating systems requires corrosion protection and/or isolation by using a heat exchanger or non-ferrous components throughout the system.