Home > PLUMBING > ROUGH PLUMBING SUPPLIES > WATER HEATER PARTS & ACCESSORI > PRESSURE RELIEF VALVES
Sort By:
Page of 1
VALVE T-R 3-1/4IN STD SHANK VALVE PRS RLF W/TEST LVR 1/2IN Camco Mfg 10473 Pressure Relief Valve 3/4 In
Richmond Temperature and Pressure Relief Valve, Nominal Size: 3/4 in, NPT Connection, Setting Pressure: 150 psi, Dimensions: 7-1/4 in L, Temperature Rating: 210 deg F, Suitable for: Water Heater Used in residential applications to protect against excessive pressure on tankless water heaters and domestic storage tanks. It consists of a bronze body construction with 1/2 in NPT threaded male inlet and 1/2 in NPT threaded female (drain) outlet connections, test lever and stainless steel spring. It is ANSI Z21.22 approved, listed and certified by CSA. The pressure relief is set at 125 psi (8.6 BAR). Test lever included. Camco USA's 3/4 in temperature and pressure valve with 4 in probe will help protect your RV or home water heater from excessive temperature and water pressure. It's factory set at 150 psi and 210 deg F. It features epoxy-coated probe to prevent corrosion buildup.
VALVE T-R 5-1/4IN LONG SHANK Watts 100XL-8-125 Temperature and Pressure Relief Valve Camco 10493 Temperature and Pressure Relief Valves
Richmond Temperature and Pressure Relief Valve, Nominal Size: 3/4 in, NPT Connection, Setting Pressure: 150 psi, Dimensions: 7-1/4 in L, Temperature Rating: 210 deg F, Suitable for: Water Heater Used in water heater and hot water storage tank applications to provide automatic temperature and pressure protection to hot water supply tanks and hot water heaters up to 105,000 Btu/hr. Features a bronze body with NPT male inlet and NPT female outlet connections, unique thermostat with special thermo-bonded coating and a test lever. ASME rated and CSA listed. Temperature relief is 210 deg F (99 deg C), Pressure relief range is 75 to 150psi (5.2 to 10.3 bar). Setting: of 150 psi/210 deg F, stainless steel spring, all brass body, ANS Z21.22 design, AGA certified, epoxy coated extension probe.
VALVE TEMP/PRESS RELIEF 3/4IN Watts LL100XL-150/210 Temperature/Pressure Relief Valve VALVE TEMP/PRESS RELIEF 3/4IN
Used in water heater and hot water storage tank applications to provide automatic temperature and pressure protection to hot water supply tanks and hot water heaters up to 105,000 Btu/hr. It features a forged body with NPT male inlet and NPT female outlet connections, unique thermostat with special thermo-bonded coating and a test lever. It is ASME rated and CSA listed. Temperature relief is 210 deg F (99 deg C) and pressure relief is 125 psi (8.6 BAR). Test lever included. Used in water heater and hot water storage tank applications to provide automatic temperature and pressure protection to hot water supply tanks and hot water heaters up to 105,000 Btu/hr. Features a bronze body with NPT male inlet and NPT female outlet connections, unique thermostat with special thermo-bonded coating and a test lever. ASME rated and CSA listed. Temperature relief is 210 deg F (99 deg C), Pressure relief range is 75 to 150psi (5.2 to 10.3 bar). Used to provide automatic temperature and pressure protection to hot water supply tanks and hot water heaters up to 105,000 Btu/hr. It features a bronze body with NPT male inlet and NPT female outlet connections, unique thermostat with special thermo-bonded coating and a test lever. Model 100XL-8 is also available with 8 in (200 mm) extension thermostat. Series 100XL is ASME rated and CSA listed. Temperature relief is 210 deg F (99 deg C), Pressure relief range is 75 to 150 psi (5.2 to 10.3 bar). Standard pressure settings are 75, 100, 125 or 150 psi (5.27, 7.03, 8.79 or 10.55 bar).
VALVE T/P 3/4IN 3-5/16LS150PSI VALVE TEMP/PRESSURE LD/F 3/4IN Watts 100XL Temperature and Pressure Relief Valve
The Camco USA T and P relief valve safely relieves excess temperature and pressure in your water heater. The Camco USA T and P valve is safe for use up to 150 psi and/or to 210 deg F. It has a 3/4 in inlet or outlet and a 3-5/16 in long shank. Durable all copper alloy body. Designed to provide automatic temperature and pressure protection to hot water supply tanks and hot water heaters up to 80,000 Btu/hr. This two-in-one relief valve provides a proven and cost effective means to protect against excessive temperature and pressure emergency conditions. It features a lead-free copper alloy body with NPT male inlet and NPT female outlet connections, thermo-bonded coating thermostat and test lever. The temperature relief is 210 deg F and the pressure relief is set at 125 psi. Stainless steel spring. Used in water heater and hot water storage tank applications to provide automatic temperature and pressure protection to hot water supply tanks and hot water heaters up to 105,000 Btu/hr. Features a bronze body with NPT male inlet and NPT female outlet connections, unique thermostat with special thermo-bonded coating and a test lever. ASME rated and CSA listed. Temperature relief is 210 deg F (99 deg C), Pressure relief range is 75 to 150psi (5.2 to 10.3 bar).
Watts 100XL Temperature and Pressure Relief Valve TEMP & PRESS RLF VALVE 4-1/4IN TEMP & PRESS RLF VALVE 4-3/4IN
Used in water heater and hot water storage tank applications to provide automatic temperature and pressure protection to hot water supply tanks and hot water heaters up to 105,000 Btu/hr. Features a bronze body with NPT male inlet and NPT female outlet connections, unique thermostat with special thermo-bonded coating and a test lever. ASME rated and CSA listed. Temperature relief is 210 deg F (99 deg C), pressure relief range is 75 to 150psi (5.2 to 10.3 bar). The temperature and pressure relief valves are designed to protect water heaters from overheating and over-pressurization. It is a component that is integral to the safe operation of the water heater. The valve features a bronze body with 3/4 in NPT male inlet and 3/4 in NPT female outlet connections, unique thermostat with special thermo-bonded coating and a test lever. Temperature relief - 210 deg F (99 deg C), pressure relief range - 75 to 150 psi (5.2 to 10.3 bar). The temperature and pressure relief valves are designed to protect water heaters from overheating and over-pressurization. It is a component that is integral to the safe operation of the water heater. The valve features a bronze body with 3/4 in NPT male inlet and 3/4 in NPT female outlet connections, unique thermostat with special thermo-bonded coating and a test lever. Temperature relief - 210 deg F (99 deg C), pressure relief range - 75 to 150 psi (5.2 to 10.3 bar).
VALVE TMP/PRESSUR RELIEF 1/2IN Watts 100XL-8-150 Temperature and Pressure Relief Valve VALVE TEMP/PRESS RELIEF 3/4IN
Designed to provide automatic temperature and pressure protection to hot water supply tanks and hot water heaters up to 15,000 Btu/hr. This two in one relief valve provides the most proven and cost effective means to protect against excessive temperature and pressure emergency conditions. It features a bronze body construction, NPT male inlet and NPT female outlet connections, a unique extended thermostat with special thermo-bonded coating and test lever. The temperature relief is 99 deg C and the pressure relief is set at 150 psi (10.6 bar). Used in water heater and hot water storage tank applications to provide automatic temperature and pressure protection to hot water supply tanks and hot water heaters up to 105,000 Btu/hr. Features a bronze body with NPT male inlet and NPT female outlet connections, unique thermostat with special thermo-bonded coating and a test lever. ASME rated and CSA listed. Temperature Relief of 210 deg F (99 deg C), Pressure Relief Range of 75 to 150psi (5.2 to 10.3 bar). Used in water heater and hot water storage tank applications to provide automatic temperature and pressure protection to hot water supply tanks and hot water heaters up to 105,000 Btu/hr. It features an extended shank for installation on water heaters with extra thick insulation as well as a bronze body with NPT male inlet and NPT female outlet connections, unique thermostat with special thermo-bonded coating and a test lever. It is suitable for water heaters with up to 2 in (50.8 mm) of insulation. It is ASME rated and CSA listed. The temperature relief is 210 deg F (99 deg C), the pressure relief range is 75 to 150 psi (5.2 to 10.3 BARs) and the standard pressure setting is 150 psi (10.55 BAR).
VALVE TMP/PRESSUR RELIEF 3/4IN VALVE VACUUM RLF LD FREE 1/2IN
Extra extended shank temperature and pressure relief valve is used in water heater and hot water storage tank applications to provide automatic temperature and pressure protection to hot water supply tanks and hot water heaters up to 105,000 Btu/hr. It features an extended shank for installation on water heaters with extra thick insulation as well as a bronze body with NPT male inlet and NPT female outlet connections, unique thermostat with special thermo-bonded coating and a test lever. It is suitable for water heaters with up to 2-1/2 in (63-1/2 mm) of insulation. It is ASME rated and CSA listed. The temperature relief is 210 deg F, the pressure relief range is 75 to 150 psi and the standard pressure setting is 150 psi. This 1/2 in lead-free vacuum relief valve is suitable for low pressure steam and water service and is ideal for use in domestic water heaters and supply tanks. This valve automatically allows air to enter into the piping system to prevent vacuum conditions that could siphon water from the system and damage water equipment. It consists of a lead-free body construction with NPT male inlet connection and a protective cap. The maximum working pressure is 200 psi.