Home > PLUMBING > ROUGH PLUMBING SUPPLIES > PIPE
Choose a sub category:
STEEL PIPE- GALVANIZED STEEL PIPE-BLACK COPPER TUBING-RIGID
COPPER TUBING-COILS PVC PRESSURE PIPE PVC-DWV PIPE
PVC-SEWER & DRAIN CPVC PIPE / CPVC TUBING ABS PIPE
CORRUGATED DRAIN
Sort By:
Page of 3
Cardel Industries REF-1/4 Refrigeration Copper Tubing Cardel Industries REF-1/8 Refrigeration Copper Tubing Cardel REF-3/16 Refrigeration Copper Tubing
Streamline? copper tube provides the strength, precision and cleanliness needed for the demanding conditions of HVAC and refrigeration applications. Preferred throughout the industry, our products have set the benchmark for HVACR copper tube. Streamline? Nitrogenized? ACR copper tube is pressurized with nitrogen to provide maximum protection against the formation of harmful oxides normally formed during brazing operations. Reduction of these oxides greatly reduces system contamination. Streamline? refrigeration service tube is of a consistent dead soft temper, bright, thoroughly dried or dehydrated and packed in shrink wrapping plus individual cartons for the highest level of protection. Streamline? copper tube provides the strength, precision and cleanliness needed for the demanding conditions of HVAC and refrigeration applications. Preferred throughout the industry, our products have set the benchmark for HVACR copper tube. Streamline? Nitrogenized? ACR copper tube is pressurized with nitrogen to provide maximum protection against the formation of harmful oxides normally formed during brazing operations. Reduction of these oxides greatly reduces system contamination. Streamline? refrigeration service tube is of a consistent dead soft temper, bright, thoroughly dried or dehydrated and packed in shrink wrapping plus individual cartons for the highest level of protection. Streamline? copper tube provides the strength, precision and cleanliness needed for the demanding conditions of HVAC and refrigeration applications. Preferred throughout the industry, our products have set the benchmark for HVACR copper tube. Streamline? Nitrogenized? ACR copper tube is pressurized with nitrogen to provide maximum protection against the formation of harmful oxides normally formed during brazing operations. Reduction of these oxides greatly reduces system contamination. Streamline? refrigeration service tube is of a consistent dead soft temper, bright, thoroughly dried or dehydrated and packed in shrink wrapping plus individual cartons for the highest level of protection.
Cardel Industries 1/4X60L Copper Tubing Cardel Industries REF-5/16 Refrigeration Copper Tubing Cardel Industries REF-3/8 Refrigeration Copper Tubing
Streamline? copper tube sets the standard for quality, consistency and service in the plumbing industries. With a full line of copper tube products to support most all plumbing supply and DWV applications, Streamline? copper tube is available in all common types including K-type, L-type, M-type and DWV. Each piece of tube is incised marked and color coded for easy, long-lasting identity. Manufactured in accordance with applicable standards, our ongoing commitment to quality continues to make Streamline? copper tube the preferred and specified brand of industry professionals. Streamline? copper tube provides the strength, precision and cleanliness needed for the demanding conditions of HVAC and refrigeration applications. Preferred throughout the industry, our products have set the benchmark for HVACR copper tube. Streamline? Nitrogenized? ACR copper tube is pressurized with nitrogen to provide maximum protection against the formation of harmful oxides normally formed during brazing operations. Reduction of these oxides greatly reduces system contamination. Streamline? refrigeration service tube is of a consistent dead soft temper, bright, thoroughly dried or dehydrated and packed in shrink wrapping plus individual cartons for the highest level of protection. Streamline? copper tube provides the strength, precision and cleanliness needed for the demanding conditions of HVAC and refrigeration applications. Preferred throughout the industry, our products have set the benchmark for HVACR copper tube. Streamline? Nitrogenized? ACR copper tube is pressurized with nitrogen to provide maximum protection against the formation of harmful oxides normally formed during brazing operations. Reduction of these oxides greatly reduces system contamination. Streamline? refrigeration service tube is of a consistent dead soft temper, bright, thoroughly dried or dehydrated and packed in shrink wrapping plus individual cartons for the highest level of protection.
Genova 500052 Solid Cut Pipe Cardel Industries REF-1/2 Refrigeration Copper Tubing Cardel Industries 3/8X60L Copper Tubing
Charlotte Pipe Cut Pipe, Nominal Size: 1/2 in, 5/8 in Dia Outside, 2 ft L, CPVC Streamline? copper tube provides the strength, precision and cleanliness needed for the demanding conditions of HVAC and refrigeration applications. Preferred throughout the industry, our products have set the benchmark for HVACR copper tube. Streamline? Nitrogenized? ACR copper tube is pressurized with nitrogen to provide maximum protection against the formation of harmful oxides normally formed during brazing operations. Reduction of these oxides greatly reduces system contamination. Streamline? refrigeration service tube is of a consistent dead soft temper, bright, thoroughly dried or dehydrated and packed in shrink wrapping plus individual cartons for the highest level of protection. Streamline? copper tube sets the standard for quality, consistency and service in the plumbing industries. With a full line of copper tube products to support most all plumbing supply and DWV applications, Streamline? copper tube is available in all common types including K-type, L-type, M-type and DWV. Each piece of tube is incised marked and color coded for easy, long-lasting identity. Manufactured in accordance with applicable standards, our ongoing commitment to quality continues to make Streamline? copper tube the preferred and specified brand of industry professionals.
Namasco BLK 1/2 Steel Pipe Cardel Industries REF-5/8 Refrigeration Copper Tubing Genova 3100572 Solid Wall Cold Water Cut Pipe 2 ft
Standard weight, coupled and threaded for ordinary uses in steam, water, gas and air lines. Not for drinking water use. Ordered by the length only. Streamline? copper tube provides the strength, precision and cleanliness needed for the demanding conditions of HVAC and refrigeration applications. Preferred throughout the industry, our products have set the benchmark for HVACR copper tube. Streamline? Nitrogenized? ACR copper tube is pressurized with nitrogen to provide maximum protection against the formation of harmful oxides normally formed during brazing operations. Reduction of these oxides greatly reduces system contamination. Streamline? refrigeration service tube is of a consistent dead soft temper, bright, thoroughly dried or dehydrated and packed in shrink wrapping plus individual cartons for the highest level of protection. Charlotte Pipe Pipe, Nominal Size: 1/2 in, 2 ft L, 600 psi, Operating Temperature: 32 to 140 deg F, Schedule Rating: SCH 40, PVC, White
Cardel Industries 1/2X20L Copper Tubing Namasco GALV 1/2 Steel Pipe Cardel Industries 1/2X60L Copper Tubing
Streamline? copper pipe sets the standard for quality, consistency and service in the plumbing industries. With a full line of copper pipe products to support most all plumbing supply and DWV applications, Streamline? copper pipe is available in all common types including K-type, L-type, M-type and DWV. Each piece of pipe is incised marked and color coded for easy, long-lasting identity. Manufactured in accordance with applicable standards, our ongoing commitment to quality continues to make Streamline? copper pipe the preferred and specified brand of industry professionals. Standard weight, coupled and threaded for steam and water working pressure up to 150 lb. Ordered by the length only. Streamline? copper pipe sets the standard for quality, consistency and service in the plumbing industries. With a full line of copper pipe products to support most all plumbing supply and DWV applications, Streamline? copper pipe is available in all common types including K-type, L-type, M-type and DWV. Each piece of pipe is incised marked and color coded for easy, long-lasting identity. Manufactured in accordance with applicable standards, our ongoing commitment to quality continues to make Streamline? copper pipe the preferred and specified brand of industry professionals.
Genova 500072 Solid Cut Pipe Namasco BLK 3/4 Steel Pipe PIPE PLN END SCH 40 1/2INX5FT
Charlotte Pipe Cut Pipe, Nominal Size: 3/4 in, 7/8 in Dia Outside, 2 ft L, CPVC Standard weight, coupled and threaded for ordinary uses in steam, water, gas and air lines. Not for drinking water use. Ordered by the length only.
Cardel Industries REF-3/4 Refrigeration Copper Tubing Genova 300 Cold Water Pressure Pipe 10 ft Genova 3100772 Solid Wall Cold Water Cut Pipe 2 ft
Streamline? copper tube provides the strength, precision and cleanliness needed for the demanding conditions of HVAC and refrigeration applications. Preferred throughout the industry, our products have set the benchmark for HVACR copper tube. Streamline? Nitrogenized? ACR copper tube is pressurized with nitrogen to provide maximum protection against the formation of harmful oxides normally formed during brazing operations. Reduction of these oxides greatly reduces system contamination. Streamline? refrigeration service tube is of a consistent dead soft temper, bright, thoroughly dried or dehydrated and packed in shrink wrapping plus individual cartons for the highest level of protection. Charlotte Pipe, Plain End, Solid Wall, Nominal Size: 1/2 in, 10 ft L, 315 psi, PVC Charlotte Pipe Pipe, Nominal Size: 3/4 in, 2 ft L, 480 psi, Operating Temperature: 140 deg F, Schedule Rating: SCH 40, PVC, White
Genova 300 Pipe Namasco GALV 3/4 Steel Pipe Genova 31007 Cold Water Pressure Pipe 10 ft
Charlotte Pipe, Plain End, Solid Wall, Nominal Size: 1/2 in, 10 ft L, 600 psi, Operating Temperature: 140 deg F, Schedule Rating: SCH 40, PVC, White Standard weight, coupled and threaded for steam and water working pressure up to 150 pounds. Ordered by the length only. Charlotte Pipe, Plain End, Solid Wall, Nominal Size: 3/4 in, 1-1/20 in Dia Outside, 10 ft L, 200 psi, Schedule Rating: SDR 21, PVC, White
Cardel Industries 1/2X60K Copper Tubing Cardel Industries 3/4X20L Copper Tubing Genova 700 Dwv Cut Pipe
Streamline? copper tube sets the standard for quality, consistency and service in the plumbing industries. With a full line of copper tube products to support most all plumbing supply and DWV applications, Streamline? copper tube is available in all common types including K-type, L-type, M-type and DWV. Each piece of tube is incised marked and color coded for easy, long-lasting identity. Manufactured in accordance with applicable standards, our ongoing commitment to quality continues to make Streamline? copper tube the preferred and specified brand of industry professionals. Streamline? copper pipe sets the standard for quality, consistency and service in the plumbing industries. With a full line of copper pipe products to support most all plumbing supply and DWV applications, Streamline? copper pipe is available in all common types including K-type, L-type, M-type and DWV. Each piece of pipe is incised marked and color coded for easy, long-lasting identity. Manufactured in accordance with applicable standards, our ongoing commitment to quality continues to make Streamline? copper pipe the preferred and specified brand of industry professionals. Charlotte Pipe Cut Pipe, Nominal Size: 1-1/2 in, 2 ft L, 330 psi, Operating Temperature: 140 deg F, Schedule Rating: SCH 40, PVC, White
Namasco BLK 1 Steel Pipe PIPE PLN END SCH 40 3/4INX5FT Cardel Industries 3/4X60L Copper Tubing
Standard weight, coupled and threaded for ordinary uses in steam, water, gas and air lines. Not for drinking water use. Ordered by the length only. Streamline? copper tube sets the standard for quality, consistency and service in the plumbing industries. With a full line of copper tube products to support most all plumbing supply and DWV applications, Streamline? copper tube is available in all common types including K-type, L-type, M-type and DWV. Each piece of tube is incised marked and color coded for easy, long-lasting identity. Manufactured in accordance with applicable standards, our ongoing commitment to quality continues to make Streamline? copper tube the preferred and specified brand of industry professionals.
Genova 300 Pipe Genova 3101072 Solid Wall Cold Water Cut Pipe 2 ft Namasco GALV 1 Steel Pipe
Charlotte Pipe, Plain End, Solid Wall, Nominal Size: 3/4 in, 10 ft L, 480 psi, Schedule Rating: SCH 40, PVC Charlotte Pipe Pipe, Nominal Size: 1 in, 2 ft L, 450 psi, Operating Temperature: 32 to 140 deg F, Schedule Rating: SCH 40, PVC, White Standard weight, coupled and threaded for steam and water working pressure up to 150 pounds. Ordered by the length only.
Genova 3101172 Solid Wall Cold Water Cut Pipe 2 ft Genova 700 Dwv Cut Pipe PP CELLCORE 1-1/2INX3FT ABS
Charlotte Pipe Pipe, Nominal Size: 1-1/4 in, 2 ft L, 370 psi, Operating Temperature: 32 to 140 deg F, Schedule Rating: SCH 40, PVC, White Charlotte Pipe Cut Pipe, Nominal Size: 2 in, 2 ft L, 280 psi, Operating Temperature: 140 deg F, Schedule Rating: SCH 40, PVC, White IPEX Pipe, Cellular Core, Nominal Size: 1-1/2 in, 1-1/2 in Dia Outside, 3 ft L, Schedule Rating: SCH 40, ABS
Genova 31010 Cold Water Pressure Pipe 10 ft PIPE PLAIN END SCH 40 1INX5FT Namasco BLK 11/4 Steel Pipe
Charlotte Pipe, Plain End, Solid Wall, Nominal Size: 1 in, 10 ft L, 200 psi, Operating Temperature: 23 deg C, Schedule Rating: SDR 21, PVC Standard weight, coupled and threaded for ordinary uses in steam, water, gas and air lines. Not for drinking water use. Ordered by the length only.
PIPE PLN END SCH40 1-1/4INX5FT PIPE DWV SCH 40 1-1/2IN X 5FT DRAIN PIPE PERF FLEX 4INX8FT
Exceeds ASTM standards and is made with no-break copolymers for professional-grade strength and integrity. Proprietary peak and valley design offers greater surface area and a 30% higher load-bearing rating than standard corrugated pipe. Perforated pipe with sock is ideal for French drain application in fine soil. Fittings available to adapt to 3 or 4 in, corrugated pipe and 4 in PVC. Ideal for tight spaces and curvy places, taping joints is not necessary. This pipe has spaced slits, so water drains in stages. It's also ideal for applications such as French drains or dispersing water from flower beds, but works even better in locations where surrounding soil or sand is fine and requires filtration or where debris is considerable.
DRAIN PIPE SOLID FLEX 4INX8FT Genova 300 Pipe Cardel 1/2X2 Copper Tubing
Great for diverting water from one place to another, water will not seep out until it reaches the end of the pipe. Charlotte Pipe Pipe, Plain End, Solid Wall, 1 in Nominal, 10 ft Length, 450 psi Pressure, SCH 40 Schedule, PVC Streamline? copper pipe sets the standard for quality, consistency and service in the plumbing industries. With a full line of copper pipe products to support most all plumbing supply and DWV applications, Streamline? copper pipe is available in all common types including K-type, L-type, M-type and DWV. Each piece of pipe is incised marked and color coded for easy, long-lasting identity. Manufactured in accordance with applicable standards, our ongoing commitment to quality continues to make Streamline? copper pipe the preferred and specified brand of industry professionals.
Genova 300 Cold Water Pressure Pipe 20 ft Namasco GALV 11/4 Steel Pipe Genova 300 Cold Water Pressure Pipe 20 ft
Charlotte Pipe Pipe, Bell End, Nominal Size: 1/2 in, 20 ft L, Schedule Rating: SCH 40, PVC Standard weight, coupled and threaded for steam and water working pressure up to 150 lb. Ordered by the length only. Charlotte Pipe Pipe, Bell End, Solid Wall, Nominal Size: 1/2 in, 0.84 in Dia Outside, Wall Thickness: 0.062 in, 20 ft L, 315 psi, Operating Temperature: 23 deg C, Schedule Rating: SDR 13.5, PVC
Namasco BLK 11/2 Steel Pipe Cardel Industries 3/4X60K Copper Tubing Genova 30007 Cold Water Pressure Pipe 20 ft
Standard weight, coupled and threaded for ordinary uses in steam, water, gas and air lines. Not for drinking water use. Ordered by the length only. Streamline? copper tube sets the standard for quality, consistency and service in the plumbing industries. With a full line of copper tube products to support most all plumbing supply and DWV applications, Streamline? copper tube is available in all common types including K-type, L-type, M-type and DWV. Each piece of tube is incised marked and color coded for easy, long-lasting identity. Manufactured in accordance with applicable standards, our ongoing commitment to quality continues to make Streamline? copper tube the preferred and specified brand of industry professionals. Charlotte Pipe Pipe, Bell End, Solid Wall, Nominal Size: 3/4 in, 20 ft L, 200 psi, Schedule Rating: SCH 21, PVC
PP CELLCORE 2INX3FT ABS TO DWV Cardel Industries RC2510 Copper Tubing Namasco GALV 11/2 Steel Pipe
IPEX Pipe, Cellular Core, Nominal Size: 2 in, 2 in Dia Outside, 3 ft L, Schedule Rating: SCH 40, ABS Streamline Copper Tubing, 10 ft L, General-Purpose, Copper Pipe Shape: Coil, 1/4 in Dia Outside, Copper Standard weight, coupled and threaded for steam and water working pressure up to 150 lb. Ordered by the length only.
PIPE DWV SCH 40 2IN X 5FT Genova 700 Cellular Core Solvent Weld Dwv Pipe Genova 300 Cold Water Pressure Pipe 20 ft
Charlotte Pipe, Cellular Core, Foam Core, Plain End, Nominal Size: 1-1/2 in, 10 ft L, Schedule Rating: SCH 40, PVC Charlotte Pipe Pipe, Bell End, Nominal Size: 3/4 in, 1.05 in Dia Outside, Wall Thickness: 0.113 in, 20 ft L, 480 psi, Schedule Rating: SCH 40, PVC, White
Genova 300 Pipe Genova 31011 Cold Water Pressure Pipe 10 ft Namasco BLK 2 Steel Pipe
JM Eagle solvent weld Schedule Series pipes are suitable for use in both pressure and drain, waste and vent applications. JM Eagle's wide line of solvent weld includes PVC schedule 40 and 80 for both pressure and non-pressure applications. The pipes are available in 10 or 20 ft lengths, in 1/2 to 16 in Dia in schedule 40, bell end and 1/2 to 12 in Dia in schedule 80, plain end. JM Eagle's ASTM 1785 product also comes in a specially formulated PVC material to increase resistance to ultraviolet rays. Called SolarBlok, it comes in IPS, 20 ft lengths, in brown. Solvent weld joints are designed to provide a rigid joint connection and the schedule-rated products are specifically engineered for use in partial support systems above ground. A 20 ft length of solvent weld schedule 40 PVC water pipe weighs approximately 72 lb. Used in cold water pressure applications only, such as irrigation and underground residential sprinkler systems; also used to make outdoor furniture. Pipe sizes are the same as iron pipe sizes. Meets ASTM-D2241. Approved for potable water piping systems. Solvent weld, use with pressure fittings. 200 PSI rating at 73 degrees Fahrenheit. Standard weight, coupled and threaded for ordinary uses in steam, water, gas and air lines. Not for drinking water use. Ordered by the length only.
Genova 700 Pipe Cardel 1/2X2 Copper Tubing PP CELLCORE 1-1/2INX6FT ABS
JM Eagle solvent weld Schedule Series pipes are suitable for use in both pressure and drain, waste and vent applications. JM Eagle's wide line of solvent weld includes PVC schedule 40 and 80 for both pressure and non-pressure applications. The pipes are available in 10 or 20 ft lengths, in 1/2 to 16 in Dia in schedule 40, bell end and 1/2 to 12 in Dia in schedule 80, plain end. JM Eagle's ASTM 1785 product also comes in a specially formulated PVC material to increase resistance to ultraviolet rays. Called SolarBlok, it comes in IPS, 20 ft lengths, in brown. Solvent weld joints are designed to provide a rigid joint connection and the schedule-rated products are specifically engineered for use in partial support systems above ground. A 20 ft length of solvent weld schedule 40 PVC water pipe weighs approximately 72 lb. Streamline? copper pipe sets the standard for quality, consistency and service in the plumbing industries. With a full line of copper pipe products to support most all plumbing supply and DWV applications, Streamline? copper pipe is available in all common types including K-type, L-type, M-type and DWV. Each piece of pipe is incised marked and color coded for easy, long-lasting identity. Manufactured in accordance with applicable standards, our ongoing commitment to quality continues to make Streamline? copper pipe the preferred and specified brand of industry professionals. IPEX Pipe, Cellular Core, Nominal Size: 1-1/2 in, 1-1/2 in Dia Outside, 6 ft L, Schedule Rating: SCH 40, ABS
Hancor 03510010 Regular Solid Single Wall Pipe 10 ft Namasco GALV 2 Steel Pipe Cardel 3/4X2 Copper Tubing
Our heavy-duty pipe for use in non-pressure drainage applications. Made of high-density polyethylene. CSA approved. Standard weight, coupled and threaded for steam and water working pressure up to 150 lb. Ordered by the length only. Streamline? copper pipe sets the standard for quality, consistency and service in the plumbing industries. With a full line of copper pipe products to support most all plumbing supply and DWV applications, Streamline? copper pipe is available in all common types including K-type, L-type, M-type and DWV. Each piece of pipe is incised marked and color coded for easy, long-lasting identity. Manufactured in accordance with applicable standards, our ongoing commitment to quality continues to make Streamline? copper pipe the preferred and specified brand of industry professionals.
Genova 700 Cellular Core Solvent Weld Dwv Pipe Genova 700 Dwv Cut Pipe Cardel Industries 1/2X5 Copper Tubing
PVC SCH 40 is highly durable, with high tensile and impact strength. It is easy to install and has better sound deadening qualities than PVC SCH 40 DWV foam core. Installation requires the use of primer and solvent cement. For pressure applications, sharply angled pressure fittings must be used. Charlotte Pipe Cut Pipe, Nominal Size: 3 in, 2 ft L, 260 psi, Operating Temperature: 140 deg F, Schedule Rating: SCH 40, PVC, White Mueller Copper Tubing, Type M, 1/2 in Nominal, 5 ft Length, Copper
Genova FlowGuard Water Pipe Genova 30010 Cold Water Pressure Pipe 20 ft PP PVC 1/2INX10FT CSA APRVD
Highly resistant to corrosion and energy efficient. Offers reduced condensation, quiet operation and no scale build-up. Meets ANSI/NSF 61 requirements regardless of the pH of the water. Charlotte Pipe Pipe, Bell End, Solid Wall, Nominal Size: 1 in, 1.315 in Dia Outside, Wall Thickness: 0.063 in, 20 ft L, 200 psi, Operating Temperature: 23 deg C, Schedule Rating: SDR 21, PVC PVC SCH 40 pipe and fittings are commonly used in assembling condensate drainage systems for condensing gas appliances and central air conditioners.
Genova 31012 Cold Water Pressure Pipe 10 ft Cardel 12033 Copper Tubing Genova Products 80011F ABS-DWV Foam Core Pipe
Used in cold water pressure applications only, such as irrigation and underground residential sprinkler systems; also used to make outdoor furniture. Pipe sizes are the same as iron pipe sizes. Meets ASTM-D2241. Approved for potable water piping systems. Solvent weld, use with pressure fittings. 200 PSI rating at 73 degrees Fahrenheit. Streamline? copper tube provides the strength, precision and cleanliness needed for the demanding conditions of HVAC and refrigeration applications. Preferred throughout the industry, our products have set the benchmark for HVACR copper tube. Streamline? Nitrogenized? ACR copper tube is pressurized with nitrogen to provide maximum protection against the formation of harmful oxides normally formed during brazing operations. Reduction of these oxides greatly reduces system contamination. Streamline? refrigeration service tube is of a consistent dead soft temper, bright, thoroughly dried or dehydrated and packed in shrink wrapping plus individual cartons for the highest level of protection. JM Eagle's wide line of solvent weld ABS pipe is available in 5, 10 and 20 ft lengths in Dia of 1-1/2 to 6 in. ABS pipes are available in both solid and cellular core. Solvent weld joints are designed to provide a rigid (or restrained) joint connection.
Genova 300 Cold Water Pressure Pipe 20 ft Genova 700 Pipe PIPE SEWER PVC 3X10 PERF
Charlotte Pipe, Type 1, Plain End, Solid Wall, Nominal Size: 1/2 in, 20 ft L, 850 psi, Schedule Rating: SCH 80, PVC, Gray Charlotte Pipe, Nominal Size: 2 in, 2-3/8 in Dia Outside, Wall Thickness: 0.154 in, 10 ft L, 280 psi, Operating Temperature: 140 deg F, Schedule Rating: SCH 40, PVC, White IPEX Sewer Pipe, Perforated, Nominal Size: 3 in, 10 ft L, PVC
Genova 400 Perforated Solvent Weld Sewer and Drain Pipe Genova 300 Cold Water Pressure Pipe 20 ft Cardel Industries RC3810 Copper Tubing
JM Eagle's makes PVC ASTM D3034 SDR 35 sewer pipe in 10 and 20 ft lengths, bell end, in 3, 4 and 6 in Dia and PVC ASTM D2729 drain pipe in 10 ft lengths, bell end, in 3, 4 and 6 in Dia. They are available perforated and non-perforated. Solvent weld joints are designed to provide a rigid (or restrained) joint connection and the schedule-rated products are specifically engineered for use in partial support systems above ground. Charlotte Pipe Pipe, Bell End, Solid Wall, Nominal Size: 1 in, 20 ft L, 450 psi, Schedule Rating: SCH 40, PVC Streamline? copper tube provides the strength, precision and cleanliness needed for the demanding conditions of HVAC and refrigeration applications. Preferred throughout the industry, our products have set the benchmark for HVACR copper tube. Streamline? Nitrogenized? ACR copper tube is pressurized with nitrogen to provide maximum protection against the formation of harmful oxides normally formed during brazing operations. Reduction of these oxides greatly reduces system contamination. Streamline? refrigeration service tube is of a consistent dead soft temper, bright, thoroughly dried or dehydrated and packed in shrink wrapping plus individual cartons for the highest level of protection.
Hancor HY-PF1-04-0010 Perforated Single Wall Pipe Hancor 04540010H Solid Single Wall Pipe Hancor 3550010 Triplewall Pipe 10 ft
Heavy-duty pipe is ideal for field drainage, foundation or window well drainage, downspout or landscape and pond overflow. Hancor heavy duty pipe for use in non-pressure drainage applications. Made of high density polyethylene. CSA approved. Our 3000 triple-wall HDPE pipe is triple-bonded polyethylene for exceptional pipe stiffness. With smooth inner and outer walls and a corrugated structural core, our 3000 triple-wall HDPE pipe is designed to have excellent pipe stiffness to that of PVC sewer and drain pipe.
Hancor 3520010 2-Hole Perforated Triplewall Pipe 10 ft PP CELLCORE 2INX6FT ABS TO DWV PIPE SEWER PVC 3X10 PLAIN
Our 3000 triple-wall HDPE pipe is triple-bonded polyethylene for exceptional pipe stiffness. With smooth inner and outer walls and a corrugated structural core, our 3000 triple-wall HDPE pipe is designed to have excellent pipe stiffness to that of PVC sewer and drain pipe. IPEX Pipe, Cellular Core, Nominal Size: 2 in, 2 in Dia Outside, 6 ft L, Schedule Rating: SCH 40, ABS IPEX Sewer Pipe, Nominal Size: 3 in, 10 ft L, PVC
PP CELLCORE 3INX3FT ABS TO DWV Cardel Industries 1/2X5 Copper Tubing Genova 700 Dwv Cut Pipe
IPEX Pipe, Cellular Core, Nominal Size: 3 in, 3 in Dia Outside, 3 ft L, Schedule Rating: SCH 40, ABS Streamline? copper pipe sets the standard for quality, consistency and service in the plumbing industries. With a full line of copper pipe products to support most all plumbing supply and DWV applications, Streamline? copper pipe is available in all common types including K-type, L-type, M-type and DWV. Each piece of pipe is incised marked and color coded for easy, long-lasting identity. Manufactured in accordance with applicable standards, our ongoing commitment to quality continues to make Streamline? copper pipe the preferred and specified brand of industry professionals. Charlotte Pipe Cut Pipe, Nominal Size: 4 in, 2 ft L, 220 psi, Operating Temperature: 140 deg F, Schedule Rating: SCH 40, PVC, White