Home > PLUMBING > ROUGH PLUMBING SUPPLIES > PIPE FITTINGS > IRON PIPE FITTINGS- GALVANIZED
Choose a sub category:
GALVANIZED TEE GALVANIZED REDUCING TEE GALVANIZED SIDE OUTLET TEE
GALVANIZED CROSS GALVANIZED LOCK NUTS GALVANIZED COUPLING
GALVANIZED REDUCING COUPLING GALVANIZED PIPE BUSHING GALVANIZED FLOOR FLANGE
GALVANIZED 90 DEG ELBOW GALVANIZ REDUCING 90 DEG ELBOW GALVANIZED 45 DEG ELBOW
GALVANIZED 90 DEG STREET ELBOW GALVANIZED SIDE OUTLET ELBOW GALVANIZED 45 DEG STREET ELBOW
GALVANIZED CAP GALVANIZED UNION GALVANIZED PLUG
GALVANIZED EXTENSION PIECE
Sort By:
Page of 3
Worldwide Sourcing 2A-1/2G Galvanized Pipe 90 Degree Elbow Worldwide Sourcing 18-1/2G Galvanized Pipe Malleable Cap Worldwide Sourcing 31-1/2G Galvanized Pipe Malleable Plug
ProSource Pipe Elbow, Nominal Size: 1/2 in, Threaded Connection, Angle: 90 deg The galvanized cap is a class 150 malleable iron pipe fitting that is used for closing and terminating the male end of a pipe or fitting. For steam and water working pressure up to 150 lb. Squared head, right hand threads.
Worldwide Sourcing 31-1/4G Galvanized Pipe Malleable Plug Worldwide Sourcing 31-3/8G Galvanized Pipe Malleable Plug World Wide Sourcing 18-1/4G Galvanized Malleable Cap
For steam and water working pressure up to 150 lb. Squared head, right hand threads. Use for closing and terminating the end of a pipe or fitting. Corrosion-resistant galvanized finish. The galvanized cap is a class 150 malleable iron pipe fitting that is used for closing and terminating the male end of a pipe or fitting.
Worldwide Sourcing 21-1/2G Galvanized Pipe Malleable Coupling World Wide Sourcing 24-1/2X1/4G Galv. Pipe Fitting Worldwide Sourcing 24-1/2X3/8G Galvanized Pipe Reducing Coupling
ProSource Pipe Coupling, Nominal Size: 1/2 in, Threaded Connection, Wall Thickness: 0.1 in, 300 psi, Operating Temperature: -4 to 572 deg F, Schedule Rating: SCH 40, Malleable Steel, 1.34 in L The galvanized reducing coupling is used in connecting galvanized pipes, which are ideal for transporting water; they are also used to join fence posts and rails, as well as scaffolding and protective railings. Its designed for a tight joint at the pipe. Female threads at both ends. The galvanized reducing coupling is used in connecting galvanized pipes, which are ideal for transporting water; they are also used to join fence posts and rails, as well as scaffolding and protective railings. Its designed for a tight joint at the pipe. Female threads at both ends.
Worldwide Sourcing 2A-3/4G Galvanized Pipe 90 Degree Elbow World Wide Sourcing 18-3/8G Galvanized Malleable Cap B&K 510-903HC Lock Nut
ProSource Pipe Elbow, Nominal Size: 3/4 in, Threaded Connection, Angle: 90 deg The galvanized cap is a class 150 malleable iron pipe fitting that is used for closing and terminating the male end of a pipe or fitting. Meets the following specifications: Material: ANSI/ASTM A-197, Dimensions of ANSI/ASME B.16.3.
World Wide Sourcing 3/8GM Galvanized Malleable Coupling World Wide Sourcing 35-1/2X1/8G Galvanized Hex Bushing Worldwide Sourcing 35-1/2X1/4G Galvanized Pipe Hex Bushing
ProSource Pipe Coupling, Nominal Size: 3/8 in, NPT Connection, Wall Thickness: 0.1 in, 300 psi, Operating Temperature: -4 to 572 deg F, Schedule Rating: SCH 40, Malleable Steel, 1.16 in L The galvanized bushing are used in connecting galvanized pipes, which are ideal for transporting water; they are also used to join fence posts and rails, as well as scaffolding and protective railings. Connects two different diameters of nipples and pipes. The galvanized bushing are used in connecting galvanized pipes, which are ideal for transporting water; they are also used to join fence posts and rails, as well as scaffolding and protective railings. Connects two different diameters of nipples and pipes.
Worldwide Sourcing 35-1/2X3/8G Galvanized Pipe Hex Bushing World Wide Sourcing 2A-3/8G Galvanized 90 Deg Elbow World Wide Sourcing 4-1/2G Galvanized 45 Deg Elbow
The galvanized bushing are used in connecting galvanized pipes, which are ideal for transporting water; they are also used to join fence posts and rails, as well as scaffolding and protective railings. Connects two different diameters of nipples and pipes. ProSource Pipe Elbow, Nominal Size: 3/8 in, Threaded Connection, Angle: 90 deg This galvanized 45 degree elbow is used to change direction in piping. It's suitable for use with water or steam. Flat banded, right hand threads.
Worldwide Sourcing 31-3/4G Galvanized Pipe Malleable Plug World Wide Sourcing 2A-1/4G Galvanized 90 Deg Elbow World Wide Sourcing 18-1/8G Galvanized  Malleable Cap
For steam and water working pressure up to 150 lb. Squared head, right hand threads. ProSource Pipe Elbow, Nominal Size: 1/4 in, Threaded Connection, Angle: 90 deg ProSource Hex Pipe Cap, Nominal Size: 1/8 in, Threaded Connection, Wall Thickness: 0.09 in, 300 psi, Operating Temperature: -4 to 572 deg F, Schedule Rating: SCH 40, Steel, 0.53 in L
Worldwide Sourcing 18-3/4G Galvanized Pipe Malleable Cap Worldwide Sourcing 21-1/4G Galvanized Pipe Malleable Coupling Worldwide Sourcing 21-3/4G Galvanized Pipe Malleable Coupling
The galvanized cap is a class 150 malleable iron pipe fitting that is used for closing and terminating the male end of a pipe or fitting. ProSource Pipe Coupling, Nominal Size: 1/4 in, FNPT Connection, Wall Thickness: 0.09 in, 300 psi, Operating Temperature: -4 to 572 deg F, Schedule Rating: SCH 40, Malleable Steel, 1.06 in L ProSource Pipe Coupling, Nominal Size: 3/4 in, Threaded Connection, Wall Thickness: 0.12 in, 300 psi, Operating Temperature: -4 to 572 deg F, Schedule Rating: SCH 40, Malleable Steel, 1.52 in L
World Wide Sourcing 21-1/8G Galvanized Malleable Coupling World Wide Sourcing PPG240-10X6 Galv. Pipe Fitting Worldwide Sourcing 11A-1/2G Galvanized Pipe Tee
ProSource Pipe Coupling, Nominal Size: 1/8 in, Threaded Connection, Wall Thickness: 0.19 in, 300 psi, Operating Temperature: -4 to 572 deg F, Schedule Rating: SCH 40, Malleable Steel, 0.96 in L The galvanized reducing coupling is used in connecting galvanized pipes, which are ideal for transporting water; they are also used to join fence posts and rails, as well as scaffolding and protective railings. Its designed for a tight joint at the pipe. Female threads at both ends. This galvanized tee is used to change direction in piping for use with water or steam. It meets ANSI standard with flat banded, right hand threads standard screw.
World Wide Sourcing 35-1/4X1/8G Galvanized Hex Bushing Worldwide Sourcing 6-1/2G Galvanized Pipe 90 Degree Elbow World Wide Sourcing 31-1/8G Galvanized Malleable Plug
The galvanized bushing are used in connecting galvanized pipes, which are ideal for transporting water; they are also used to join fence posts and rails, as well as scaffolding and protective railings. Connects two different diameters of nipples and pipes. This galvanized 90 degree elbow is used to change direction in piping. It's suitable for use with water or steam. Flat banded, right hand threads. For steam and water working pressure up to 150 lb. Squared head, right hand threads.
Worldwide Sourcing 31-1G Galvanized Pipe Malleable Plug World Wide Sourcing 4-1/4G Galvanized 45 Deg Elbow World Wide Sourcing 24-1/4X1/8G Galvanized Red Coupling
For steam and water working pressure up to 150 lb. Squared head, right hand threads. This galvanized 45 degree elbow is used to change direction in piping. It's suitable for use with water or steam. Flat banded, right hand threads. The galvanized reducing coupling is used in connecting galvanized pipes, which are ideal for transporting water; they are also used to join fence posts and rails, as well as scaffolding and protective railings. Its designed for a tight joint at the pipe. Female threads at both ends.
Worldwide Sourcing 24-3/8X1/4G Galvanized Pipe Reducing Coupling Worldwide Sourcing 24-3/4X1/2G Galvanized Pipe Reducing Coupling World Wide Sourcing 2B-1/2X3/8G Galvanized 90 Degree Elbow
The galvanized reducing coupling is used in connecting galvanized pipes, which are ideal for transporting water; they are also used to join fence posts and rails, as well as scaffolding and protective railings. Its designed for a tight joint at the pipe. Female threads at both ends. The galvanized reducing coupling is used in connecting galvanized pipes, which are ideal for transporting water; they are also used to join fence posts and rails, as well as scaffolding and protective railings. Its designed for a tight joint at the pipe. Female threads at both ends. ProSource Reducing Pipe Elbow, Nominal Size: 1/2 x 3/8 in, FIPT Connection, Angle: 90 deg, 300 psi, Operating Temperature: -20 to 150 deg F, Iron
Worldwide Sourcing 11A-1/4G Galvanized Pipe Tee World Wide Sourcing 11A-3/8G Galvanized Malleable Tee World Wide Sourcing 35-3/8X1/8G Galvanized Hex Bushing
This galvanized tee is used to change direction in piping for use with water or steam. It meets ANSI standard with flat banded, right hand threads standard screw. This galvanized tee is used to change direction in piping for use with water or steam. It meets ANSI standard with flat banded, right hand threads standard screw. The galvanized bushing are used in connecting galvanized pipes, which are ideal for transporting water; they are also used to join fence posts and rails, as well as scaffolding and protective railings. Connects two different diameters of nipples and pipes.
Worldwide Sourcing 35-3/8X1/4G Galvanized Pipe Hex Bushing World Wide Sourcing 18-1G Galv. Pipe Fitting Worldwide Sourcing 35-3/4X1/4G Galvanized Pipe Hex Bushing
The galvanized bushing are used in connecting galvanized pipes, which are ideal for transporting water; they are also used to join fence posts and rails, as well as scaffolding and protective railings. Connects two different diameters of nipples and pipes. The galvanized cap is a class 150 malleable iron pipe fitting that is used for closing and terminating the male end of a pipe or fitting. The galvanized bushing are used in connecting galvanized pipes, which are ideal for transporting water; they are also used to join fence posts and rails, as well as scaffolding and protective railings. Connects two different diameters of nipples and pipes.
World Wide Sourcing 35-3/4X3/8G Galvanized Hex Bushing Worldwide Sourcing 35-3/4X1/2G Galvanized Pipe Hex Bushing World Wide Sourcing 2B-3/4X1/2G Galvanized 90 Degree Elbow
The galvanized bushing are used in connecting galvanized pipes, which are ideal for transporting water; they are also used to join fence posts and rails, as well as scaffolding and protective railings. Connects two different diameters of nipples and pipes. The galvanized bushing are used in connecting galvanized pipes, which are ideal for transporting water; they are also used to join fence posts and rails, as well as scaffolding and protective railings. Connects two different diameters of nipples and pipes. ProSource Reducing Pipe Elbow, Nominal Size: 3/4 x 1/2 in, Threaded Connection, Angle: 90 deg
Worldwide Sourcing 6-1/4G Galvanized Pipe 90 Degree Elbow World Wide Sourcing 6-3/8G Galvanized 90 Deg St Elbow Worldwide Sourcing 6-3/4G Galvanized Pipe 90 Degree Elbow
This galvanized 90 degree elbow is used to change direction in piping. It's suitable for use with water or steam. Flat banded, right hand threads. This galvanized 90 degree elbow is used to change direction in piping. It's suitable for use with water or steam. Flat banded, right hand threads. This galvanized 90 degree elbow is used to change direction in piping. It's suitable for use with water or steam. Flat banded, right hand threads.
Worldwide Sourcing 2A-1G Galvanized Pipe 90 Degree Elbow World Wide Sourcing PPG120-10 Galvanized 45 Deg Elbow World Wide Sourcing 4-3/4G Galvanized 45 Deg Elbow
ProSource Pipe Elbow, Nominal Size: 1 in, Threaded Connection, Angle: 90 deg ProSource Pipe Elbow, Nominal Size: 3/8 in, Threaded Connection, Angle: 45 deg, 150 psi This galvanized 45 degree elbow is used to change direction in piping. It's suitable for use with water or steam. Flat banded, right hand threads.
Worldwide Sourcing 11A-3/4G Galvanized Pipe Tee World Wide Sourcing 11A-1/8G Galvanizedanize Malleable Tee World Wide Sourcing 21-1G Galv. Pipe Fitting
This galvanized tee is used to change direction in piping for use with water or steam. It meets ANSI standard with flat banded, right hand threads standard screw. This galvanized tee is used to change direction in piping for use with water or steam. It meets ANSI standard with flat banded, right hand threads standard screw. ProSource Pipe Coupling, Nominal Size: 1 in, Threaded Connection, Wall Thickness: 0.13 in, 300 psi, Operating Temperature: -4 to 572 deg F, Schedule Rating: SCH 40, Malleable Steel, 1.67 in L
World Wide Sourcing 24-3/4X1/4G Galvanized Red Coupling World Wide Sourcing 35-1X1/2G Galv. Pipe Fitting Worldwide Sourcing 35-1X3/4G Galvanized Pipe Hex Bushing
The galvanized reducing coupling is used in connecting galvanized pipes, which are ideal for transporting water; they are also used to join fence posts and rails, as well as scaffolding and protective railings. Its designed for a tight joint at the pipe. Female threads at both ends. The galvanized bushing are used in connecting galvanized pipes, which are ideal for transporting water; they are also used to join fence posts and rails, as well as scaffolding and protective railings. Connects two different diameters of nipples and pipes. The galvanized bushing are used in connecting galvanized pipes, which are ideal for transporting water; they are also used to join fence posts and rails, as well as scaffolding and protective railings. Connects two different diameters of nipples and pipes.
World Wide Sourcing PPG120-6 Galv. Pipe Fitting World Wide Sourcing 24-3/4X3/8G Galvanized Red Coupling Worldwide Sourcing 24-1X3/4G Galvanized Pipe Reducing Coupling
This galvanized 45 degree elbow is used to change direction in piping. It's suitable for use with water or steam. Flat banded, right hand threads. The galvanized reducing coupling is used in connecting galvanized pipes, which are ideal for transporting water; they are also used to join fence posts and rails, as well as scaffolding and protective railings. Its designed for a tight joint at the pipe. Female threads at both ends. The galvanized reducing coupling is used in connecting galvanized pipes, which are ideal for transporting water; they are also used to join fence posts and rails, as well as scaffolding and protective railings. Its designed for a tight joint at the pipe. Female threads at both ends.
World Wide Sourcing 2A-1/8G Galvanized 90 Deg Elbow World Wide Sourcing PPG90R-10X8 Galv Pipe Fitting World Wide Sourcing 4-1G Galvanized 45 Deg Elbow
ProSource Pipe Elbow, Nominal Size: 1/8 in, Threaded Connection, Angle: 90 deg ProSource Reducing Pipe Elbow, Nominal Size: 3/8 x 1/4 in, Threaded Connection, Angle: 90 deg This galvanized 45 degree elbow is used to change direction in piping. It's suitable for use with water or steam. Flat banded, right hand threads.
World Wide Sourcing 31-1-1/4G Galv. Pipe Fitting World Wide Sourcing 24-1X1/2G Galvanized Red Coupling World Wide Sourcing PPG121-15 Galvanized 45 Deg St Elbow
For steam and water working pressure up to 150 lb. Squared head, right hand threads. The galvanized reducing coupling is used in connecting galvanized pipes, which are ideal for transporting water; they are also used to join fence posts and rails, as well as scaffolding and protective railings. Its designed for a tight joint at the pipe. Female threads at both ends. This galvanized 45 degree elbow is used to change direction in piping. It's suitable for use with water or steam. Flat banded, right hand threads.
World Wide Sourcing 11A3/4X3/4X1/2G Galvanized Tee B and K 511-613 Galvanized Malleable Iron Extension Piece World Wide Sourcing 18-1-1/4G Galvanized  Malleable Cap
This galvanized tee is used to change direction in piping for use with water or steam. It meets ANSI standard with flat banded, right hand threads standard screw. B & K Pipe Extension Piece, Nominal Size: 1/2 in, FIP x MIP Connection, 150 lb, Iron The galvanized cap is a class 150 malleable iron pipe fitting that is used for closing and terminating the male end of a pipe or fitting.
World Wide Sourcing PPG130R-15X10 Galv. Pipe Fitting Worldwide Sourcing 11A-1G Galvanized Pipe Tee World Wide Sourcing PPG240-25X10 Galv Pipe Fitting
This galvanized tee is used to change direction in piping for use with water or steam. It meets ANSI standard with flat banded, right hand threads standard screw. This galvanized tee is used to change direction in piping for use with water or steam. It meets ANSI standard with flat banded, right hand threads standard screw. The galvanized reducing coupling is used in connecting galvanized pipes, which are ideal for transporting water; they are also used to join fence posts and rails, as well as scaffolding and protective railings. Its designed for a tight joint at the pipe. Female threads at both ends.
World Wide Sourcing PPG90R-20X10 Galv Pipe Fitting World Wide Sourcing 2B1X3/4G Galvanized 90 Deg Elbow Worldwide Sourcing 6-1G Galvanized Pipe 90 Degree Elbow
ProSource Reducing Pipe Elbow, Nominal Size: 3/4 x 3/8 in, Threaded Connection, Angle: 90 deg Reducing elbow, 90 deg angle, 1 in, 3/4 in, with female NPT threads for connecting to a male pipe or fitting. This galvanized 90 degree elbow is used to change direction in piping. It's suitable for use with water or steam. Flat banded, right hand threads.
World Wide Sourcing 6-1/8G Galvanized 90 Deg St Elbow World Wide Sourcing 7-3/4G Galvanized 45 Deg St Elbow World Wide Sourcing PPG130R-20X15X15 Galv Pipe Fitting
This galvanized 90 degree elbow is used to change direction in piping. It's suitable for use with water or steam. Flat banded, right hand threads. This galvanized 45 degree elbow is used to change direction in piping. It's suitable for use with water or steam. Flat banded, right hand threads. This galvanized tee is used to change direction in piping for use with water or steam. It meets ANSI standard with flat banded, right hand threads standard screw.
World Wide Sourcing 35-1-1/4X3/4G Galv. Pipe Fitting Worldwide Sourcing 35-1-1/4X1G Galvanized Pipe Hex Bushing World Wide Sourcing 18-1-1/2G Galv. Pipe Fitting
The galvanized bushing are used in connecting galvanized pipes, which are ideal for transporting water; they are also used to join fence posts and rails, as well as scaffolding and protective railings. Connects two different diameters of nipples and pipes. The galvanized bushing are used in connecting galvanized pipes, which are ideal for transporting water; they are also used to join fence posts and rails, as well as scaffolding and protective railings. Connects two different diameters of nipples and pipes. The galvanized cap is a class 150 malleable iron pipe fitting that is used for closing and terminating the male end of a pipe or fitting.
World Wide Sourcing 31-1-1/2G Galvanized Malleable Plug World Wide Sourcing 35-1-1/4X1/2G Galvanized Bushing B and K Industries 511-614 Galv. Pipe Fitting
For steam and water working pressure up to 150 lb. Squared head, right hand threads. The galvanized bushing are used in connecting galvanized pipes, which are ideal for transporting water; they are also used to join fence posts and rails, as well as scaffolding and protective railings. Connects two different diameters of nipples and pipes. Meets the following specifications for material ANSI/ASTM A-197, for dimensions ANSI/ASME B.16.3, for threads ANSI B1.20.1.
World Wide Sourcing 21-1 1/4G Galv. Pipe Fitting World Wide Sourcing 24-11/4X1G Galv Pipe Fitting World Wide Sourcing 35-1-1/2X1G Galv. Pipe Fitting
ProSource Pipe Coupling, Nominal Size: 1-1/4 in, Threaded Connection, Wall Thickness: 0.14 in, 300 psi, Operating Temperature: -4 to 572 deg F, Schedule Rating: SCH 40, Malleable Steel, 1.93 in L The galvanized reducing coupling is used in connecting galvanized pipes, which are ideal for transporting water; they are also used to join fence posts and rails, as well as scaffolding and protective railings. Its designed for a tight joint at the pipe. Female threads at both ends. ProSource Reducing Hex Pipe Bushing, Nominal Size: 1-1/2 x 1 in, Female x Male Connection, 300 psi, Operating Temperature: -4 to 572 deg F, Schedule Rating: SCH 40, Hex Size: 2 in, Steel, 1.14 in L
World Wide Sourcing 35-1-1/2X1-1/4G Galv. Pipe  Malleable Bushing World Wide Sourcing PPG121-8 Galvanized 45 Deg Elbow World Wide Sourcing PPG121-10 Galvanized 45 Deg Elbow
The galvanized bushing are used in connecting galvanized pipes, which are ideal for transporting water; they are also used to join fence posts and rails, as well as scaffolding and protective railings. Connects two different diameters of nipples and pipes. This galvanized 45 degree elbow is used to change direction in piping. It's suitable for use with water or steam. Flat banded, right hand threads. This galvanized 45 degree elbow is used to change direction in piping. It's suitable for use with water or steam. Flat banded, right hand threads.