|
|
|
|
|
|
|
|
|
|
|
|
|
|
Fittings manufactured in white polypropylene with food-grade EPDM O-ring. For use in out of the wall applications such as connecting ice makers, water treatment equipment, automatic coffee equipment.
|
Fittings manufactured in white polypropylene with food-grade EPDM O-ring. For use in out-of-the-wall applications such as connecting ice makers, water treatment equipment, automatic coffee equipment.
|
Fittings manufactured in white polypropylene with food-grade EPDM O-ring. For use in out of the wall applications such as connecting ice makers, water treatment equipment, automatic coffee equipment.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The polypropylene range of inch-size push-in fittings is offered for tube sizes 1/4 to 1/2 in OD. The fittings are manufactured in white polypropylene with food-grade EPDM O-ring. They have been developed to satisfy the filtered pure water market and wide range of applications.
|
Fittings manufactured in white polypropylene with food-grade EPDM O-ring. For use in out of the wall applications such as connecting ice makers, water treatment equipment, automatic coffee equipment.
|
Fittings manufactured in white polypropylene with food-grade EPDM O-ring. For use in out of the wall applications such as connecting ice makers, water treatment equipment, automatic coffee equipment.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Fittings manufactured in white polypropylene with food-grade EPDM O-ring. For use in out-of-the-wall applications such as connecting ice makers, water treatment equipment, automatic coffee equipment.
|
Fittings manufactured in white polypropylene with food-grade EPDM O-ring. For use in out-of-the-wall applications such as connecting ice makers, water treatment equipment, automatic coffee equipment.
|
Fittings manufactured in white polypropylene with food-grade EPDM O-ring. For use in out of the wall applications such as connecting ice makers, water treatment equipment, automatic coffee equipment.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Boshart Pipe Adapter, Nominal Size: 1/4 in, FPT Connection, 100 psi, Operating Temperature: 150 deg F, Polyethylene, White
|
The polypropylene range of inch-size push-in fittings is offered for tube sizes 1/4 to 1/2 in OD. The fittings are manufactured in white polypropylene with food-grade EPDM O-ring. They have been developed to satisfy the filtered pure water market and wide range of applications.
|
Boshart Pipe Adapter, Nominal Size: 1/4 in, MPT Connection, 100 psi, Operating Temperature: 150 deg F, Polyethylene, White
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The polypropylene range of inch-size push-in fittings is offered for tube sizes 1/4 to 1/2 in OD. The fittings are manufactured in white polypropylene with food-grade EPDM O-ring. They have been developed to satisfy the filtered pure water market and wide range of applications.
|
Fittings manufactured in white polypropylene with food-grade EPDM O-ring. For use in out of the wall applications such as connecting ice makers, water treatment equipment, automatic coffee equipment.
|
Fittings manufactured in white polypropylene with food-grade EPDM O-ring. For use in out of the wall applications such as connecting ice makers, water treatment equipment, automatic coffee equipment.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
ProBite's lead-free push connect? stop end connectors are easy to install and easy to remove. Using Push Connect? technology, our stop ends can be installed in seconds without the use of glues, calks and special plumbing tools. Great for pressure testing, central heating systems or any application where the flow of water might need to be interrupted. ProBite's lead-free push connect? stop ends are great for direct or indirect cold water systems, unvented and vented hot water systems and more.
|
Incorporates stainless steel gripping teeth in the collets. These corrosion-resistant teeth allow the connectors to interconnect with multiple materials without the need for special tools or tube inserts. It works with copper, CPVC, PEX, LPDE, MPDE, HDPE and polybutylene tubing.
|
Push-fit fitting for the connection of plastic, copper and CPVC pipe. Designed, manufactured and assembled by John Guest Speedfit. A must for any tool bag. The unique feature of the Speedfit concept, the ability to disconnect the fitting at will, means that the end cap provides a leak-proof seal and can be removed at any stage in order to allow work to restart or allow an extension to the system. This makes the fitting the ideal tool for when water needs to be turned back on, overnight for instance or if a job suffers an interruption. End caps are also useful when pressure testing a system before appliances are connected. Simply push the fitting fully on to the pipe. Should the need arise to demount the connection push the collet towards the body of the fitting and pull the pipe to release.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Boshart Reducing Pipe Coupling, Nominal Size: 3/8 x 1/4 in, 250 psi, Polyethylene
|
John Guest Pipe Connector, Nominal Size: 3/4 in, CTS Connection, 160 psi, Operating Temperature: 200 deg F, Plastic, Suitable for: CPVC, Copper and PEX Pipe
|
B & K ProLine Adapter, Nominal Size: 1/2 in, Push-Fit x FPT Connection, 200 psi, Operating Temperature: 200 deg F, Brass, Suitable for: Copper, CPVC and PEX Tubing
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
B & K ProLine Adapter, Nominal Size: 1/2 in, Push-Fit x Male Connection, 200 psi, Brass
|
Boshart Tube Coupling, Nominal Size: 3/8 in, 250 psi, Polyethylene
|
ProBite's lead-free push connect? stop end connectors are easy to install and easy to remove. Using Push Connect? technology, our stop ends can be installed in seconds without the use of glues, calks and special plumbing tools. Great for pressure testing, central heating systems or any application where the flow of water might need to be interrupted. ProBite's lead-free push connect? stop ends are great for direct or indirect cold water systems, unvented and vented hot water systems and more.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The speed-fit secure range of fittings including the male connector ensures a secure connection when adapting Speedfit pipe or copper to threaded applications. To install, always use PTFE tape when preparing thread, working up the full thread length. The fitting can be tightened using a spanner on the hexagon area at the middle of the component.
|
The coupler is a push-fit plastic fitting for the connection of plastic, copper and CPVC pipe. It was designed, manufactured and assembled by John Guest Speedfit. It can be installed by simply pushing the fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. Should the need arise to demount the connection unlock the nut and push the collet towards the body of the fitting and pull the pipe to release. The coupler fitting ensures an easier working environment in confined places, is approved for behind the wall installations and removes the need for hot works on site. Installation can be reduced by around 40% when compared to traditional fixing methods.
|
Push-fit fitting for the connection of plastic, copper and CPVC pipe. Designed, manufactured and assembled by John Guest Speedfit. A must for any tool bag. The unique feature of the Speedfit concept, the ability to disconnect the fitting at will, means that the end cap provides a leak-proof seal and can be removed at any stage in order to allow work to restart or allow an extension to the system. This makes the fitting the ideal tool for when water needs to be turned back on, overnight for instance or if a job suffers an interruption. End caps are also useful when pressure testing a system before appliances are connected. Simply push the fitting fully on to the pipe. Should the need arise to demount the connection push the collet towards the body of the fitting and pull the pipe to release.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Speedfit secure fittings manufactured from high-quality engineered plastic with EPDM O-ring. Suitable for hot and cold water plumbing applications. Can be used with Copper, PEX and CPVC pipe. Approved for behind the wall installation.
|
ProBite's lead-free straight couplings are the answer for a fast, leak-free pipe installation. Installable in seconds without requiring glues, solder or flux, our lead-free straight couplings provide solid connections on PEX, CPVC or copper pipe.
|
Plastic quick-connect fittings are made from polysulfone, a high-performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, PEX, CPVC and polybutylene pipe. Product meets all National Plumbing Codes.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Plastic quick-connect fittings are made from polysulfone, a high-performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, PEX, CPVC and polybutylene pipe. Product meets all National Plumbing Codes.
|
Plastic quick-connect fittings are made from polysulfone, a high-performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, PEX, CPVC and polybutylene pipe. Product meets all National Plumbing Codes.
|
This quick-connect elbow fitting works with copper, CPVC, PEX, LPDE, MPDE, HDPE and polybutylene tubings. It is easy-to-install no tools or tube inserts are required. The fitting can be used for hot and cold water applications. The unique O-ring guide feature insures zero-leak connections. Unlike barb fittings, this fitting joins the tubing on the outside, increasing the flow capacity. After a connection has been made even under maximum pressure, the tubing is able to swivel, making it ideal for vibrating and dynamic applications.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Boshart Pipe Tee, Nominal Size: 3/8 x 1/8 in, 250 psi, Polyethylene
|
Plastic quick-connect fittings are made from polysulfone, a high-performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, PEX, CPVC and polybutylene pipe. Product meets all National Plumbing Codes.
|
Plastic quick-connect fittings are made from polysulfone, a high-performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, PEX, CPVC and polybutylene pipe. Product meets all National Plumbing Codes.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The reducer fitting ensures an easier working environment in confined places, is approved for behind the wall installations and removes the need for hot works on site. Installation can be reduced by around 40% when compared to traditional fixing methods. To install the reducer, simply push the fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. Should the need arise to demount the connection unlock the nut and push the collet towards the body of the fitting and pull the pipe to release.
|
Works with copper, CPVC, PEX, LPDE, MPDE, HDPE and polybutylene tubing in hot and cold water applications. Incorporates stainless steel gripping teeth in the collets, allowing the connectors to interconnect with multiple materials without special tools or tube inserts. Exclusive O-ring guide insures zero-leak connections. Tube orientation can be changed by a simple twist, reducing the amount of tubing required to plumb a water system. Reusable, approved for use behind walls and underground.
|
Plastic quick-connect fittings are made from polysulfone, a high-performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, PEX, CPVC and polybutylene pipe. Product meets all National Plumbing Codes.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Plastic quick-connect fittings are made from polysulfone, a high-performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, PEX, CPVC and polybutylene pipe. Product meets all National Plumbing Codes.
|
Plastic quick-connect fittings are made from polysulfone, a high-performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, PEX, CPVC and polybutylene pipe. Product meets all National Plumbing Codes.
|
Connects to copper, CPVC, PEX, LPDE, MPDE, HDPE and polybutylene tubing.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
It requires you to simply push the fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. Should the need arise to demount the connection unlock the nut and push the collet towards the body of the fitting and pull the pipe to release. The fitting ensures an easier working environment in confined places, is approved for behind the wall installations and removes the need for hot works on site. Installation can be reduced by around 40% when compared to traditional fixing methods.
|
B & K ProLine Adapter, Nominal Size: 3/4 in, Push-Fit x MPT Connection, 200 psi, Operating Temperature: 200 deg F, Brass, Suitable for: Copper, CPVC and PEX Tubing
|
Plastic quick-connect fittings are made from polysulfone, a high-performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, PEX, CPVC and polybutylene pipe. Product meets all National Plumbing Codes.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Watts? quick-connect connectors are designed and manufactured for many years of trouble-free service. Produced of off-white polysulfone, a high-performance thermal plastic material, the Watts? quick-connect design allows for quick and easy connections without the use of installation tools.
|
Connects to copper, PEX or CPVC, no glue, soldering, crimping or special tools, approved for in-wall and underground burial, approved for potable water, radiant and hydronic heating, easily repositioned or removed.
|
Incorporates stainless steel gripping teeth in the collets. These corrosion-resistant teeth allow the connectors to interconnect with multiple materials without the need for special tools or tube inserts. It works with copper, CPVC, PEX, LPDE, MPDE, HDPE and polybutylene tubing.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Watts? quick-connect connectors are designed and manufactured for many years of trouble-free service. Produced of off-white polysulfone, a high-performance thermal plastic material, the Watts? quick-connect design allows for quick and easy connections without the use of installation tools.
|
The speed-fit secure range of fittings including the male connector ensures a secure connection when adapting Speedfit pipe or copper to threaded applications. To install, always use PTFE tape when preparing thread, working up the full thread length. The fitting can be tightened using a spanner on the hexagon area at the middle of the component.
|
Boshart Tube Coupling, Nominal Size: 3/4 in, Polyethylene
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The reducing coupler is a push-fit plastic fitting for the connection of plastic, copper and CPVC pipe. It was designed, manufactured and assembled by John Guest Speedfit. To install, simply push the fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. Should the need arise to demount the connection unlock the nut and push the collet towards the body of the fitting and pull the pipe to release. The reducing coupler fitting ensures an easier working environment in confined places, is approved for behind the wall installations and removes the need for hot works on site. Installation can be reduced by around 40% when compared to traditional fixing methods.
|
The speed-fit secure range of fittings including the male connector ensures a secure connection when adapting Speedfit pipe or copper to threaded applications. To install, always use PTFE tape when preparing thread, working up the full thread length. The fitting can be tightened using a spanner on the hexagon area at the middle of the component.
|
Boshart Pipe Tee, Nominal Size: 1/2 in, Push-Fit Connection, Polyethylene
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Plastic quick-connect fittings are made from polysulfone, a high-performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, PEX, CPVC and polybutylene pipe. Product meets all National Plumbing Codes.
|
Plastic quick-connect fittings are made from polysulfone, a high-performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, PEX, CPVC and polybutylene pipe. Product meets all National Plumbing Codes.
|
Plastic quick-connect fittings are made from polysulfone, a high-performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, PEX, CPVC and polybutylene pipe. Product meets all National Plumbing Codes.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The coupler is a push-fit plastic fitting for the connection of plastic, copper and CPVC pipe. It was designed, manufactured and assembled by John Guest Speedfit. It can be installed by simply pushing the fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. Should the need arise to demount the connection unlock the nut and push the collet towards the body of the fitting and pull the pipe to release. The coupler fitting ensures an easier working environment in confined places, is approved for behind the wall installations and removes the need for hot works on site. Installation can be reduced by around 40% when compared to traditional fixing methods.
|
Plastic quick-connect fittings are made from polysulfone, a high-performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, PEX, CPVC and polybutylene pipe. Product meets all National Plumbing Codes.
|
Plastic quick-connect fittings are made from polysulfone, a high-performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, PEX, CPVC and polybutylene pipe. Product meets all National Plumbing Codes.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This 1/4 in x 1/8 in MIP quick-connect elbow works with copper, CPVC, PEX, LPDE, MPDE, HDPE and polybutylene tubings. It is easy-to-install, no tools or tube inserts are required. The fitting can be used for hot and cold water applications. The unique O-ring guide feature insures zero-leak connections. Unlike barb fittings, this fitting joins the tubing on the outside, increasing the flow capacity. After a connection has been made even under maximum pressure, the tubing is able to swivel, making the fitting ideal for vibrating and dynamic applications.
|
Plastic quick connect fittings are made from polysulfone, a high performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, PEX, CPVC and polybutylene pipe. Product meets all National Plumbing Codes.
|
ProBite's lead-free reducing coupling connects copper, CPVC and PEX tubing in any combination, for long-lasting full flow connections. Easy to install, easy to remove, reusable, long-lasting and backed by a 75 years warranty.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Plastic quick connect fittings are made from polysulfone, a high performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, PEX, CPVC and polybutylene pipe. Product meets all National Plumbing Codes.
|
Twist and Lock manufactured from high-quality engineered plastic with EPDM O-ring. Suitable for hot and cold water plumbing applications. Can be used with copper, PEX and CPVC pipe. Approved for behind the wall installation.
|
Twist and Lock manufactured from high-quality engineered plastic with EPDM O-ring. Suitable for hot and cold water plumbing applications. Can be used with copper, PEX and CPVC pipe. Approved for behind the wall installation.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Watts? quick-connect connectors are designed and manufactured for many years of trouble-free service. Produced of off-white polysulfone, a high-performance thermal plastic material, the Watts? quick-connect design allows for quick and easy connections without the use of installation tools.
|
Plastic quick connect fittings are made from polysulfone, a high performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, PEX, CPVC and polybutylene pipe. Product meets all National Plumbing Codes.
|
The SharkBite? push-to-connect toilet connector is the fastest and easiest way to connect copper, PEX, CPVC, PE-RT or SRD9 HDPE pipe. These fittings are push-to-connect on one end and come with a 7/8 in ballcock thread on the other end. The fittings are available in either straight connections or as an elbow 90 deg connection. They are also easily rotatable after installation for easy installation even in tight spaces.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Watts? quick-connect connectors are designed and manufactured for many years of trouble-free service. Produced of off-white polysulfone, a high-performance thermal plastic material, the Watts? quick-connect design allows for quick and easy connections without the use of installation tools.
|
Plastic quick connect fittings are made from polysulfone, a high performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, PEX, CPVC and polybutylene pipe. Product meets all National Plumbing Codes.
|
Plastic quick-connect fittings are made from polysulfone, a high-performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, PEX, CPVC and polybutylene pipe. Product meets all National Plumbing Codes.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Plastic quick-connect fittings are made from polysulfone, a high-performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, PEX, CPVC and polybutylene pipe. Product meets all National Plumbing Codes.
|
ProBite's lead-free straight couplings are the answer for a fast, leak-free pipe installation. Installable in seconds without requiring glues, solder or flux, our lead-free straight couplings provide solid connections on PEX, CPVC or copper pipe.
|
Plastic quick-connect fittings are made from polysulfone, a high-performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, PEX, CPVC and polybutylene pipe. Product meets all National Plumbing Codes.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This quick-connect male elbow fitting is designed for use in potable water applications. It is made of polysulfone plastic and is tested, certified and approved for drinking water. This 1/2 in CTS x 1/2 in NPT fitting rotates fully under pressure, connects to multiple materials without the use of installation tools and features an integral collet with stainless steel gripping teeth and patented O-ring guide design. The pressure rating is 100 psi at 180 deg F (6.9 bar at 82 deg C) or 250 psi at 75 deg F (17.2 bar at 24 deg C).
|
Plastic quick connect fittings are made from polysulfone, a high performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, PEX, CPVC and polybutylene pipe. Product meets all National Plumbing Codes.
|
Connects to copper, PEX or CPVC, no glue, soldering, crimping or special tools, approved for in-wall and underground burial, approved for potable water, radiant and hydronic heating, easily repositioned or removed.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
An innovative push-fit fitting which provides a quick and easy method of replacing burst or damaged pipe without the need to alter existing pipe work. See below for a step by step installation guide.
|
The SharkBite? straight coupling is the easiest plumbing fitting to join any combination of Copper, PEX, CPVC, PE-RT or SRD9 HDPE pipe together. With no soldering, clamps, unions or glue required, it's as simple as inserting the pipe into the fitting deep enough to be sealed by our specially formulated O-ring. Once inserted, the stainless steel teeth bite down and grip the pipe. This push to connect fitting is designed for potable water and radiant heating (including underground or behind the wall) applications with no access panels required. It is rated up to 200 deg F and 200 psi.
|
Plastic quick-connect fittings are made from polysulfone, a high-performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, PEX, CPVC and polybutylene pipe. Product meets all National Plumbing Codes.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Plastic quick connect fittings are made from polysulfone, a high performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, PEX, CPVC and polybutylene pipe. Product meets all National Plumbing Codes.
|
Watts? quick-connect connectors are designed and manufactured for many years of trouble-free service. Produced of off-white polysulfone, a high-performance thermal plastic material, the Watts? quick-connect design allows for quick and easy connections without the use of installation tools.
|
Connects to copper, PEX or CPVC, no glue, soldering, crimping or special tools, approved for in-wall and underground burial, approved for potable water, radiant and hydronic heating, easily repositioned or removed.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This quick-connect elbow fitting is designed for use in potable water applications. It is made of polysulfone plastic and is tested, certified and approved for drinking water. This 3/8 in CTS fitting rotates fully under pressure, connects to multiple materials without the use of installation tools and features an integral collet with stainless steel gripping teeth and patented O-ring guide design. The pressure rating is 100 psi at 180 deg F (6.9 bar at 82 deg C) or 250 psi at 75 deg F (17.2 bar at 24 deg C).
|
The SharkBite? stop valve connectors allow you to easily connect 1/4 in (3/8 in OD) copper tube sized pipe (CTS) to either a 1/4 or 3/8 in compression connection, which are primarily used for refrigerators or ice makers. The push-to-connect connection is the fastest and easiest way to connect to copper, PEX, CPVC or PE-RT pipe and requires no soldering, clamps, unions or glue.
|
The SharkBite Connection System is an instant push-fit connection that connects copper tubing, CTS CPVC and PEX pipe in an combination - no soldering, clamps, unions or glue required. Certified to 200 PSI and 200DegF. Compact, robust DZR brass body. Foundation of a strong, corrosion resistant, durable fitting. Design certified to ANSI/NSF-61 and ASSE 1061 product standard for use in potable water and hydronic heating water distribution.Approved to be used underground and behind walls without access panels. Lead Free Complaint.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
SharkBite? elbows allow the user to connect any combination of copper, PEX CPVC or PE-RT pipe together to form a 90 deg connection. With no soldering, clamps, unions or glue required, it's as simple as inserting the pipe into the fitting deep enough to be sealed by our specially formulated O-ring. Once inserted, the stainless steel teeth bite down and grip the pipe. This push-to-connect fitting is designed for potable water and radiant heating (including underground or behind the wall) applications with no access panels required. It is rated up to 200 deg F and 200 psi.
|
The SharkBite? push-to-connect faucet connector is the fastest and easiest way to connect copper, PEX, CPVC, PE-RT or SRD9 HDPE pipe. These fittings are push-to-connect on one end and come with a 1/2 in threaded connection on the other end. They are also easily rotatable after installation for easy installation even in tight spaces.
|
SharkBite? female connectors combine innovative push-to-connect design with a standard FNPT adapter on the opposite end. The push-fit end is compatible with copper, PEX, CPVC or PE-RT pipes and can be installed with no solder, glue, unions or tools required.
|
|
|
VIEW MAP & PHOTO GALLERY | CALL US: 406-466-3100
