|
|
|
|
|
|
|
|
|
|
|
Bolted water pipe clamps made of zinc die-cast. Wire range 8 solid to 2 stranded. UL listed. Connects grounding wire to the grounding rod.
|
Indoor or outdoor applications. Use to secure the grounding wire to a 1/2 in through 1 in pipe. UL listed. Wire size fits #10 to 2 AWG.
|
Green round washer head screw for switch and outlet boxes.
|
|
|
|
|
|
|
|
|
|
|
|
|
Connects grounding wire to the grounding rod.
|
GB offers a convenient grounding accessories line of products suitable for most job requirements. This grounding pig tail is made from #12 AWG stranded wire. One end is terminated with a bare fork terminal. The other end is a captured screw.
|
Connects grounding wire to the grounding rod.
|
|
|
|
|
|
|
|
|
|
|
|
|
Connects grounding wire to the grounding rod. UL and CSA listed for 1/2 in and 5/8 in ground rods and number 4 rebar and accept a conductor range from number 10 solid to number 2 stranded.
|
Connects grounding wire to the grounding rod.
|
Convenient grounding accessories include products suitable for most job requirements.
|
|
|
|
|
|
|
|
|
|
|
|
|
Indoor or outdoor applications. Use to secure the grounding wire to a 1/2 in through 1 in pipe. UL listed. Wire size fits #10 to 2 AWG.
|
Indoor or outdoor applications. Use to secure the grounding wire to a 1/2 in through 1 in pipe. UL listed. Wire size fits #10 to 2 AWG.
|
Bolted water pipe clamps made from high-strength corrosion-resistant copper alloy. Connects grounding wire to the grounding rod. Range 10 solid to 2 stranded. UL listed.
|
|
|
|
|
|
|
|
|
|
|
|
|
Bolted water pipe grounding clamp. UL listed. Made of corrosion-resistant copper alloy.
|
Hex head grounding screws. Indoor or outdoor applications. Use to ground a wiring device to a steel outlet box. RoHS Compliant.
|
Indoor or outdoor applications. Use to ground a wiring device to a steel outlet box. Green color.
|
|
|
|
|
|
|
|
|
|
|
|
|
Wire size fits #10 to 2 AWG. Use to secure the grounding wire to a 1-1/4 to 2 in or 2-1/2 to 4 in pipe. Bronze. UL listed.
|
Bronze alloy grounding clamp with bronze screws. Used for rebar, ground rods, water pipes and direct-burial water pipe. Lay-in feature cuts installation time. Approved for direct burial in earth and concrete. Pipe range from 1/2 in (12.7 mm) to 1 in (25.4 mm). Rebar range from #4 (10 mm) to #8 (25 mm). Ground rod range from 1/2 in (12.7 mm) to 1 in (25.4 mm). Conductor range from #10 (5.5 sq-mm) to #2 (25 sq-mm). UL listed.
|
Bronze alloy grounding clamp with bronze screws. Used for rebar, ground rods, water pipes and direct-burial water pipe. Lay-in feature cuts installation time. Approved for direct burial in earth and concrete. Pipe range from 1/2 in (12.7 mm) to 1 in (25.4 mm). Rebar range from #4 (10 mm) to #8 (25 mm). Ground rod range from 1/2 in (12.7 mm) to 1 in (25.4 mm). Conductor range from #10 (5.5 sq-mm) to #2 (25 sq-mm). UL listed.
|
|
|
|
|
|
|
|
|
|
|
|
|
Raco Wire Pigtail, Wire Size: 12 AWG, Copper, Green, Dimensions: 0.5 in H x 8 in L x 0.4 in W, Includes: 4-Way Combo Head Ground Screw
|
Zinc-coated exteriors are hot-dip galvanized for solid protection against corrosion in accordance with ASTM specification A153-78. Surfaces are rigidly inspected to eliminate seams, slivers and other defects. Meet EEI-NEMA TDJ-30 and are REA listed. 15 year service life in most soils. Galvanized plated steel.
|
Copper bonded, resists corrosion better than galvanized rods, allowing for a 30 year service life in most soils. Uniform plating thickness, average tensile strength of 80000 psi and straightness tolerance of 0.010 in per linear foot. Exceeds the requirements of ANSI/UL 467-1984, CSA and ANSI/NEMA GR-1.
|
|
|
|
|
|
|
|
|
|
|
|
|
Zinc-coated exteriors are hot-dip galvanized for solid protection against corrosion in accordance with ASTM specification A153-78. Surfaces are rigidly inspected to eliminate seams, slivers and other defects. Meet EEI-NEMA TDJ-30 and are REA listed. 15 year service life in most soils. Galvanized plated steel.
|
Convenient grounding accessories include products suitable for most job requirements.
|
Copper bonded, resists corrosion better than galvanized rods, allowing for a 30 year service life in most soils. Uniform plating thickness, average tensile strength of 80000 psi and straightness tolerance of 0.010 in per linear foot. Exceeds the requirements of ANSI/UL 467-1984, CSA and ANSI/NEMA GR-1.
|
|
|
|
|
|
|
|
|
|
|
|
|
Copper bonded, resists corrosion better than galvanized rods, allowing for a 30 year service life in most soils. Uniform plating thickness, average tensile strength of 80000 psi and straightness tolerance of 0.010 in per linear foot. Exceeds the requirements of ANSI/UL 467-1984, CSA and ANSI/NEMA GR-1.
|
Bolted water pipe clamps made from high-strength corrosion-resistant copper alloy. Connects grounding wire to the grounding rod. Range 10 solid to 2 stranded. UL listed.
|
The Intersystem Bonding Termination (IBTB), part of the Vent nVent ERICO line of facility electrical protection products, is designed to meet the requirements of the 2008 NEC? Article 250.94 bonding for other systems. The IBTB is mounted adjacent to the meter base or service entrance equipment and is a convenient way to interconnect and terminate grounding conductors from telephone, CATV or radio and television antennas. The IBTB includes corrosion-resistant, stainless steel mounting hardware and is easily accessible for connection and inspection. The lay-in connection clamp (#6 to #2 AWG or 16 to 35 sq-mm) allows easy installation of the grounding electrode conductor in one continuous length, where possible. The polymeric base and housing is impact-resistant, UV-stabilized and meets UL? requirements for weatherability performance.
|
|
|
|
|
|
|
|
|
Copper bonded, resists corrosion better than galvanized rods, allowing for a 30 year service life in most soils. Uniform plating thickness, average tensile strength of 80000 psi and straightness tolerance of 0.010 in per linear foot. Exceeds the requirements of ANSI/UL 467-1984, CSA and ANSI/NEMA GR-1.
|
|