|
|
|
|
|
|
|
|
|
|
|
|
|
|
Ideal for setting nails into materials; long length for setting nails in hard-to-reach areas; fully hardened, precision-milled steel for long life; long, beveled tip for easy nail head alignment; square head prevents rolling when set down.
|
Ideal for setting nails into materials. Long length for setting nails in hard-to-reach areas. Fully hardened, precision-milled steel for long life. Long, beveled tip for easy nail head alignment. Square head prevents rolling when set down.
|
Ideal for setting nails into materials. Long length for setting nails in hard-to-reach areas. Fully hardened, precision-milled steel for long life. Long, beveled tip for easy nail head alignment. Square head prevents rolling when set down.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Made of fully hardened, precision-milled steel with long, beveled tip for easy nail head alignment, grip is slip-resistant and ribbed to absorb shock, improving precision. Long length enables user to set nails in hard-to-reach areas.
|
Made of fully hardened, precision-milled steel with long, beveled tip for easy nail head alignment, grip is slip-resistant and ribbed to absorb shock, improving precision. Long length enables user to set nails in hard-to-reach areas.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Made of fully hardened, precision-milled steel with long, beveled tip for easy nail head alignment, grip is slip-resistant and ribbed to absorb shock, improving precision. Long length enables user to set nails in hard-to-reach areas.
|
The Vulcan center punch is made from drop forged, heat treated chrome alloy steel material with baked enamel finish and heavy duty hex shank.
|
The Vulcan center punch is made from drop forged, heat treated chrome alloy steel material with baked enamel finish and heavy duty hex shank.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Vulcan center punch is made from drop forged, heat treated chrome alloy steel material with baked enamel finish and heavy duty hex shank.
|
The Vulcan center punch is made from drop forged, heat treated chrome alloy steel material with baked enamel finish and heavy duty hex shank.
|
Used to cut or shape wrought iron, cast Iron, steel, brass, bronze, copper, aluminum, nuts and rivets.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Hardened steel pin, knurled body provides no-slip grip, auto-centering and countersunk end. Used for creating starter screw holes.
|
The Vulcan pry bar is made from dropped forged steel. It has a matte black finish and the nail slots at both ends offer easy accessibility and leverage.
|
The wonder bar is constructed from forged carbon steel which provides durability and strength. The bar is ideal for removing nails, lifting and prying objects. Beveled cutting edges and nail slots for quality performance.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Cold chisel is ground for cutting, shaping and removing metal that is softer than the cutting edge. The blade and handle are made of chrome alloy steel with 3/8 in tip and 5-1/2 L.
|
The scratch awls has a high impact plastic handle length of 4 in with a hardened and tempered steel blade. It can be used to start holes in soft wood and scribe or mark wood or other soft metals.
|
Cold chisel is ground for cutting, shaping and removing metal that is softer than the cutting edge. The blade and handle are made of chrome alloy steel with 1/2 in tip and 6 in L.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Cold chisel is ground for cutting, shaping and removing metal that is softer than the cutting edge. The blade and handle are made of chrome alloy steel with 5/8 in tip and 6-1/2 L.
|
General Hollow Punch, 1/8 in Tip, Steel, Black-Oxide, 4 in L
|
General Hollow Punch, 3/16 in Tip, Steel, Black-Oxide, 4 in L
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
It enables you to quickly and easily locate the tool around the head of the protruding nail.
|
The GreatNeck? magnetic brad and nail driver gets the job done without marring surfaces. This driver is ideal for working in tight corners and hard to reach spaces. The magnetic head holds the nail firm while downward pressure on an ergonomic solid wood handle easily inserts the nail. The driver is chrome-plated to resist rust. A metal ferrule is set firmly into the handle for durability.
|
Cold chisel is ground for cutting, shaping and removing metal that is softer than the cutting edge. The blade and handle are made of chrome alloy steel with 3/4 in tip and 7 in L.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Vulcan claw is made of heat-treated carbon steel blade with a square plastic handle.
|
General Hollow Punch, 1/4 in Tip, Steel, Black-Oxide, 4 in L
|
Rip out nails quickly and efficiently with the help of the Garant hexagonal wrecking bar. This 18 in (45.7 cm) tool is made of forged steel and polished surfaces for increased strength and rigidity. Its goose-shaped neck facilitates the removal of nails. It has a crowbar at one extremity for better leverage and a nail puller at the other extremity. This wrecking bar is designed for DIYers and professionals looking for an efficient tool for small construction projects.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Made of hardened and tempered alloy steel with square head. Round knurled body. Tips are cupped and chamfered. Square head prevents rolling. 4 in long. Set contains 1/32 in, 1/16 in and 3/32 in nails.
|
The Vulcan pry bar nail puller is made of dropped forged steel with hexagon steel construction for enhanced strength. It's a single claw tool.
|
Heat-treated and plated alloy steel blades hold up to repeated use and are corrosion resistance. Chrome-plated steel ferrule for added strength. Bright, smooth finish on bar. Machined hardwood handle. Bar diameter of 3/16 in and length 3-3/8 in.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Features heavy-duty, chrome alloy steel with baked enamel. Includes 3 pieces: (1) 5/16 x 5 in, (1) 5/8 x 6-1/2 in, (1) 3/4 x 7 in chisels.
|
General Hollow Punch, 3/8 in Tip, Steel, Black-Oxide, 4-13/64 in L
|
Bar is drop-forged and heated for excellent strength during prying, digging and tamping with hexagon steel construction for enhanced strength. Gooseneck pattern.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Spring tensioned, self opening tool made of plated steel with cushioned vinyl grip with revolving turret that has six hardened steel punches: 5/64 in, 3/32 in, 7/64 in, 1/8 in, 5/32 in and 3/16 in; used to make tiny holes in leather, plastic, rubber, canvas and other lightweight materials.
|
STANLEY Nail Set, Specifications: 1/32 in Tip, Steel, Dimensions: 5 in L, Includes: #58-911 1/32 in, #58-912 2/32 in, #58-913 3/32 in Nail Setter
|
General Hollow Punch, 7/16 in Tip, Steel, Black-Oxide, 4-1/2 in L
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Interchangeable tip for convenience. Hexagonal head prevents rolling and can be used as a standard drill chuck - nail set doubles as drill extension. Knurled locking collar for easy nail release and reversal. Accepts standard screwdriver bits for versatility. Long, beveled tip for easy nail head alignment. Fully hardened, precision-milled steel for long life. Set includes 1/32 in, 2/32 in, 3/32 in and #2 point Phillips nails.
|
The forged hexagonal steel ripping bar made of 3/4 in Dia carbon steel is great for basic demolition work. It also features a slotted claw and beveled ends for performance and functionality.
|
General Hollow Punch, 1/2 in Tip, Steel, Black-Oxide, 4-1/2 in L
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
General Hollow Punch, 9/16 in Tip, Steel, Black-Oxide, 4-39/64 in L
|
Get the prying power you need with the 12-3/4 in Wonder Bar? Pry Bar. The strong high-carbon steel hand tool is designed to give you excellent leverage for pulling nails, lifting and scraping.
|
Heat-treated for durability with a special extracting claw and a beveled nail slot.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Use to remove molding, open boxes, scrape paint and pull nails. High-carbon steel hardened and tempered, curved ground scraping end with nail slot. Fits easily into tool boxes or pouches.
|
Hit Tool Center Punch and Nail Set, 3/16, 2/32 in Tip, Shank Type: Spring Loaded, Steel, Black-Oxide, 7 in L
|
Introducing the HIT Tool 1/32 in (#1) nail set and 2/32 in (#2) nail set combination hammerless spring tool model #NS1NS2. This dual-tipped, spring actuated tool has a 1/32 in nail setter on one end and a 2/32 in nail setter on the other. These nail sets are designed to efficiently set and countersink finish nails and brads into wood surfaces. The dual headed design features two of the most commonly used sizes for trim and finishing jobs. Utilizing the HIT Tool's patent pending hammerless impact technology, this tool is compact and lightweight yet provides precision accuracy even in tight spaces. The comfort grip provides for effortless and safe control of the extremely powerful, high-tensile spring. These features combine to create a versatile tool that would make a great addition to any toolbox.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Hit Tool Prick Punch and Center Punch, 1/8, 3/16 in Tip, Shank Type: Spring Loaded, Steel, Black-Oxide, 7 in L
|
Rip out nails, lift and rake wood, open crates and boxes quickly and efficiently with the help of the Garant flat nail puller. This 15 in tool is made of forged and tempered steel for increased strength and rigidity. Its beveled extremities avoids damaging surfaces and one of the crowbars can be sharpened. This pry bar is especially designed for DIYers and professionals looking for a robust, reliable and efficient tool for various types of projects demanding minimum leverage.
|
The Vulcan pry bar nail puller is made from drop-forged steel with hexagon steel construction for enhanced strength. It's a double claws tool and be used for precision nail pulling and prying.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Hit Tool Hammerless Nail Starter and Set, 2/32 in Tip, Shank Type: Spring Loaded, Steel, Black-Oxide, 7 in L
|
The HIT Tool 2/32 in (#2) nail set and 3/32 in (#3) nail set combination hammerless spring tool model #NS2NS3. This dual tipped, spring actuated tool has a 2/32 in nail setter on one end and a 3/32 in nail setter on the other. These nail sets are designed to efficiently set and countersink finish nails and brads into wood surfaces. The dual headed design features two of the most commonly used sizes for trim and finishing jobs. Utilizing the HIT Tool's patent pending hammerless impact technology, this tool is compact and lightweight yet provides precision accuracy even in tight spaces. The comfort grip provides for effortless and safe control of the extremely powerful, high tensile spring. These features combine to create a versatile tool that would make a great addition to any toolbox.
|
Made of one-piece forged chrome vanadium steel. Hardened, quenched and tempered for long life and safety. Powder coat finish for increased visibility. Set contains 3/8 in, 1/2 in and 5/8 in.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Ideal for basic demolition work, the offset pattern ripping chisel allows for side pulling and ripping and has a slotted claw and beveled ends for functionality and performance.
|
Surfaces ground for precision nail pulling and prying resulting in less material damage, high visibility, durable finish helps prevent loss and makes it easy to find the tool on the job-site. Nail slot provides access for improved functionality and nail pulling. Precision tips for fast access and reduced damage to salvaged materials. Radius design increases durability, strength and better prying leverage. Striking pad assists users with penetration and prying.
|
Cold chisel is ground for cutting, shaping and removing metal that is softer than the cutting edge. The blade and handle are made of chrome alloy steel with 1 in tip and 8 in L.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Lightweight aluminum body with alloy steel internal components that provides accurate center punches to prevent drill bits from traveling. One-handed operation. No hammer needed.
|
The 8 in molding bar is precise and durable. Its flat striking face allows claw to be driven under deeply embedded nails. With polished flat surface and beveled claws for prying molding and trim, tempered body to help reduce spalling and its forged, high-carbon steel construction, this tool is ideal for removing trim with minimal damage.
|
Our 12 in Pry Bar has a SHOCKSHIELD? grip for ultimate vibration reduction. This pry bar is designed to withstand the toughest of jobsite conditions while remaining sharp enough to pry, pull and scrape in tight spaces. The claws are induction hardened for added strength, ensuring long lasting sharpness over the life of the tool. The high leverage head of the pry bar is designed for easier prying.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Surfaces ground for precision nail pulling and prying resulting in less material damage, high visibility, durable finish helps prevent loss and makes it easy to find the tool on the job-site. Nail slot provides access for improved functionality and nail pulling. Precision tips for fast access and reduced damage to salvaged materials. Radius design increases durability, strength and better prying leverage. Striking pad assists users with penetration and prying.
|
Made from tempered, forged high-carbon alloy steel. Flat surface allows users to pry molding and trim reducing material damage, polished, beveled claws for nail pulling and prying.
|
The 10 in claw bar is precise and durable. Its flat striking face allows claw to be driven under deeply embedded nails. With polished beveled claws are ideal for precision nail pulling and prying, tempered body to help reduce spalling and its forged, high-carbon steel construction, this tool is ideal for small demolition projects.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The 12 in flat bar has a wide prying end for leverage. This bar has multiple nail pullers and point beveled ends for efficient nail removal.
|
Bar is forged half round, for added strength and less weight with wide, thin blade for easy prying.
|
Estwing's Handy claw is the best tool for getting under and removing nails, with a comfortable vinyl grip.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The 24 in hexagonal forged steel pry bar is strong and durable. With both a slotted claw and beveled ends for functionality and performance and 3/4 in Dia high-carbon steel, this tool is idea for basic demolition work.
|
Surfaces ground for precision nail pulling and prying resulting in less material damage, high visibility, durable finish helps prevent loss and makes it easy to find the tool on the job-site. Nail slot provides access for improved functionality and nail pulling. Precision tips for fast access and reduced damage to salvaged materials. Radius design increases durability, strength and better prying leverage. Striking pad assists users with penetration and prying.
|
STANLEY Cold Chisel with Guard, 1 in Tip, 1.33 in L Blade, Steel Blade, Rubber Handle, Handle Color: Black/Yellow, 5.11 in Handle, 12 in OAL
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Stanley wonder bar X21 pry bar is designed for easier prying, lifting and nail pulling. It features forged high-carbon steel construction for increased strength and durability. Its 21 in length allows better reach and greater leverage. The pry bar has a high-visibility, powder-coated finish for long-lasting wear.
|
The Vulcan utility bar is made from dropped forged steel (hardness for blade HRC 38-42) 6 mm thick. It has a matte black finish and nail slots at both ends offer easy accessibility and leverage.
|
Bar is drop-forged and heated for excellent strength during prying, digging and tamping with hexagon steel construction for enhanced strength. Gooseneck pattern.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Stanley three-piece, light-duty pry bar set comes with three bar sizes to use for multiple applications. Stamped one-piece steel construction with teardrop nail pullers for easy nail removal. Lightweight design for easy carrying and high visibility power-coated finish.
|
Provides accurate center punches without drill bit traveling, one-handed operation, no hammer needed. Spring tension impact adjustments for working with lighter materials. Replaceable hardened steel point and black oxide finish prevents rust.
|
Heat-treated for durability with a double end, 90 deg and 30 deg, puller and fully sharpened claw tips.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For punching round holes in leather, plastic, rubber, canvas, cardboard and similar materials; special compound joint design requires less effort than other punch pliers; spring tension, self-opening revolving punch; six tapered, hollow, hardened steel, non-clogging punches; plastic grips for comfort and control. Punch sizes: 5/64 in, 3/32 in, 7/64 in, 1/8 in, 5/32 in and 3/16 in.
|
Lightweight aluminum body with alloy steel internal components, provides accurate center punches without drill bit traveling. One-handed operation, no hammer needed. Spring tension impact adjustments for working with lighter materials.
|
Our 9 in finish nail puller is equipped with our SMOOTHPULL? high-leverage head delivering maximum leverage for quick nail removal. The durable grip is wear-resistant for continual comfort over the life of the tool and reduces vibration when the nail puller is struck by a hammer. The beveled edges of the nail puller claws allow for better grip on hard-to-reach nails. The sharpened claws and integrated nail removal feature on the head of the tool provide you with effective ways to remove embedded nails, reducing damage to surrounding materials. The unique head geometry, combined with optimized 6D to 12D nail slots, deliver increased efficiency on the jobsite.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Ideal for basic demolition work; 3/4 in Dia high-carbon steel; slotted claw and beveled ends for functionality and performance.
|
Rip out nails quickly and efficiently with the help of the Garant hexagonal wrecking bar. This 30 in (76.2 cm) tool is made of forged steel and polished surfaces for increased strength and rigidity. Its goose-shaped neck facilitates the removal of nails. It has a crowbar at one extremity for better leverage and a nail puller at the other extremity. This wrecking bar is designed for DIYers and professionals looking for an efficient tool for small construction projects.
|
Our 15 in Pry Bar has a SHOCKSHIELD? grip for ultimate vibration reduction. This pry bar is designed to withstand the toughest of jobsite conditions while remaining sharp enough to pry, pull and scrape in tight spaces. The claws are induction hardened for added strength, ensuring long lasting sharpness over the life of the tool. The high leverage head of the pry bar is designed for easier prying.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Heavy-duty steel bar with a wide gooseneck claw for more stability and leverage.
|
The 10 in and 12 in molding puller is made of fine tool steel, drop-forged and tempered for extra durability. Chrome finish and comfortable blue cushion grip. Precision thin blade for removing molding without damaging the wall. Slot in blade for removing small nails and brads. Other end has popular Japanese nail puller with precise and sharp claws for removing imbedded nails or headless nails with ease and minimal damage. Blade end for removing molding precision claw allows finished nails to be pulled through molding so the molding can be reused.
|
Estwing's 12 in and 15 in nail pullers have polished ends and are extremely strong and durable, these tools can pull a variety of fasteners. The nail puller claws are precise and sharp to remove imbedded or headless nails with ease and minimal wood damage. Shaped rounded head design gives you improved leverage. Precision thin claw design enables you to get into hard to reach places.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The 10 in claw bar with extra wide strike face helps to prevent damage to wood by exposing the head of the nail.
|
Bar is drop-forged and heated for excellent strength during prying, digging and tamping with hexagon steel construction for enhanced strength. Gooseneck pattern.
|
Bar is drop-forged and heated for excellent strength during prying, digging and tamping with hexagon steel construction for enhanced strength. Gooseneck pattern.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The forged hexagonal steel ripping bar made of 3/4 in Dia carbon steel is great for basic demolition work. It also features a slotted claw and beveled ends for performance and functionality.
|
Made from tempered, forged, high-carbon alloy steel with a flat striking face and polished, beveled claws for nail pulling and prying.
|
Drop-forged heat-treated steel construction. Offset, hexagon steel with large capacity extracting claws and combination puller. Used for industrial demolition, ripping out nails, walls, studs and framework. Stock size 2-1/4 in, black oxide finish resists rust and corrosion.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Useful for almost any prying, mail pulling, wood-splitting or levering job you are likely to encounter, The WonderBar? is the tool for you.
|
The 21 in flat bar is made of spring steel for strength and durability and has multiple nail pullers for flexibility and nail removal.
|
Our 10 in nail puller is equipped with our SMOOTHPULL? high-leverage head delivering maximum leverage for quick nail removal. The durable grip is wear-resistant for continual comfort over the life of the tool and reduces vibration when the nail puller is struck by a hammer. The beveled edges of the nail puller claws allow for better grip on hard-to-reach nails. The sharpened claws and integrated nail removal feature on the head of the tool provide you with effective ways to remove embedded nails, reducing damage to surrounding materials. The unique head geometry, combined with optimized 8D to 16D nail slots, deliver increased efficiency on the jobsite.
|
|
|
VIEW MAP & PHOTO GALLERY | CALL US: 406-466-3100
