|
|
|
|
|
|
|
|
|
|
|
|
|
|
DEWALT Mixing Nozzle, Plastic, Dimensions: 8 in L, Suitable for: AC100+ Gold 10 oz and 12 oz Cartridge System
|
Brushes are used for cleaning drilled holes prior to adhesive anchor installation. Brushes have a twisted wire handle with nylon bristles. For use with Simpson Strong-Tie? ET-3G? adhesives.
|
Brushes are used for cleaning drilled holes prior to adhesive anchor installation. Brushes have a twisted wire handle with nylon bristles. For use with Simpson Strong-Tie? ET-3G? adhesives.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Simpson Strong-Tie? AMN19Q mixing nozzles ensure proper proportioning and mixing of Simpson Strong-Tie? acrylic formulations. Required for compliance with manufacturer's installation instructions.
|
Red Head A7+ is a high-strength, fast-cure adhesive that is designed to securely anchor threaded rod and rebar to cured concrete and masonry. A7+ is one of the most versatile anchoring solutions on the market, suitable for use in an extremely wide range of applications and environmental conditions.
|
PC-CONCRETE? anchoring and crack filling epoxy is the epoxy chosen to repair cracks in warehouse and factory floors. Dispense and apply using a standard size caulking gun. Cures hard enough to drive over within 3 hrs at standard temperature. Nothing stronger for your anchoring applications. PC-CONCRETE? is a two-component (1:1 ratio), 100% solids, high modulus and structural epoxy paste. PC-CONCRETE? is a solvent-free, no-odor, high strength, moisture insensitive epoxy system. The resin and hardener are uniformly dispensed from a 9 oz cartridge system and mixed through a mixing nozzle using a standard size caulking gun.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
An 18-element mixing nozzle with integrated nut for use with 10 oz, 22 oz and 56 oz epoxy adhesive cartridges.
|
Sika? AnchorFix-1 adhesive anchoring system has been specially formulated as a high-performance, two-component adhesive anchor system for threaded and reinforcing bars in uncracked concrete.
|
The AC100+ Gold is a two-component vinylester adhesive anchoring system. The system includes injection adhesive in plastic cartridges, mixing nozzles, dispensing tools and hole cleaning equipment. The adhesive is designed for bonding threaded rod and reinforcing bar elements into drilled holes in concrete and masonry base materials. It can be considered for use in solid base materials as well as hollow base materials with screen tubes.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Sika? AnchorFix-2 adhesive anchoring system has been specially formulated as a high-performance, two-component adhesive anchor system for threaded and reinforcing bars in uncracked concrete.
|
AT-3G? is a hybrid, acrylic-based adhesive for anchoring threaded rod and rebar into cracked and uncracked concrete. Ideal for cold weather and wet concrete applications, AT-3G? dispenses easily and offers a fast curing time for same-day bolt up. It can be specified for a wide range of in-service temperatures and maintains its strong bond strength in extreme environments for ultimate design and jobsite flexibility. Tested and code compliant with the IBC and IRC, AT-3G? hybrid adhesive is easy to install with the conventional blow-brush-blow hole-cleaning method.
|
Quikrete? FastSet? anchoring epoxy is a gray solvent-free, low-odor, high strength, moisture insensitive, non-sag epoxy. Quikrete? FastSet? anchoring epoxy is ideal for vertical or horizontal applications, including anchoring bolts, threaded rods and rebar dowels into concrete and masonry substrates. Ideal for fastening in grout filled block and unreinforced masonry and seismic anchoring and bracing.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Quikrete? high strength anchoring epoxy is a two-component, high modulus, structural epoxy with an extended working time of approximately 20 mins at 77 deg F, Quikrete? high strength anchoring epoxy is ideal for vertical or horizontal applications, including anchoring bolts, threaded rods and rebar dowels into concrete and masonry substrates. Ideal for fastening in grout filled block and un-reinforced masonry and seismic anchoring and bracing.
|
SET-3G is an epoxy-based anchoring adhesive with high design strength and proven performance. SET-3G is a 1:1 ratio, two-component, anchoring adhesive for concrete (cracked and uncracked). SET-3G installs and performs in a variety of environmental conditions and temperature extremes.
|
The CDT10S features a steel carriage for ultimate durability and is engineered for continuous, high-volume use. The CDT10S also features double-gripping plates that help extend tool life.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
SET-3G is the latest innovation in epoxy anchoring adhesives from Simpson Strong-Tie. Formulated to provide excellent performance in cracked and uncracked concrete at elevated temperatures, SET-3G installs and performs in a variety of environmental conditions and temperature extremes. The exceptional bond strength of SET-3G results in high design strengths.
|
The EDT22S epoxy adhesive tool features a steel carriage and is engineered for high-volume, continuous use. The tool can be easily converted (conversion parts included) from dispensing a 22 oz 1:1 ratio cartridge to a 16.5 oz 2:1 ratio cartridge.
|
|
|
VIEW MAP & PHOTO GALLERY | CALL US: 406-466-3100
