|
|
|
|
|
|
|
|
|
|
|
|
|
|
Polypropylene material. Ideal for steep pitched roofs. Low profile and a stair step screen to provide more airflow in a smaller vent. 17-1/2 in x 18-1/2 in flashing with 4.3 in H. 61 sq-in of net-free area. UV resistant polypropylene.
|
Low profile style. Molded in screen. Angled screen that prevents birds from nesting. Wide, flexible flange will not crack on installation, even in cold weather. Angled throat to effectively deflect water. Injection molded UV resistant polypropylene.
|
Low profile style. Molded in screen. Angled screen that prevents birds from nesting. Wide, flexible flange will not crack on installation, even in cold weather. Angled throat to effectively deflect water. Injection molded UV resistant polypropylene.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Low profile style. Molded in screen. Angled screen that prevents birds from nesting. Wide, flexible flange will not crack on installation, even in cold weather. Angled throat to effectively deflect water. Injection molded UV resistant polypropylene.
|
Low profile style. Molded in screen. Angled screen that prevents birds from nesting. Wide, flexible flange will not crack on installation, even in cold weather. Angled throat to effectively deflect water. Injection molded UV resistant polypropylene.
|
Polypropylene material. Ideal for steep pitched roofs. Low profile and a stair step screen to provide more airflow in a smaller vent. 17-1/2 in x 18-1/2 in flashing with 4.3 in H. 61 sq-in of net-free area. UV resistant polypropylene.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Polypropylene material. Ideal for steep pitched roofs. Low profile and a stair step screen to provide more airflow in a smaller vent. 17-1/2 in x 18-1/2 in flashing with 4.3 in H. 61 sq-in of net-free area. UV resistant polypropylene.
|
With the WeatherPRO? Series PRO50 you no longer need to worry about foul weather. The unique baffle system within the WeatherPRO? Series PRO50 wards off driving snow and blistering rain.
|
With the WeatherPRO? Series PRO50 you no longer need to worry about foul weather. The unique baffle system within the WeatherPRO? Series PRO50 wards off driving snow and blistering rain.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Polypropylene material. Ideal for steep pitched roofs. Low profile and a stair step screen to provide more airflow in a smaller vent. 17-1/2 in x 18-1/2 in flashing with 4.3 in H. 61 sq-in of net-free area. UV resistant polypropylene.
|
Installed on a sloped, shingled roof to ventilate hot, moist attic air as a part of a balanced ventilation system. Installed within 24 in of the roof's peak.
|
Low profile style. Molded in screen. Angled screen that prevents birds from nesting. Wide, flexible flange will not crack on installation, even in cold weather. Angled throat to effectively deflect water. Injection molded UV resistant polypropylene.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Fits most brands of turbine bases. No GT12E Dade County Approval 04-0618.01.
|
Installed on an existing base from a whirly bird or turbine vent, both 12 or 14 in. Intended for a sloped, shingled roof to ventilate hot, moist attic air as a part of a balanced ventilation system. Installed within 24 in of the roof's peak.
|
Permanently lubricated track system, upper and lower stainless steel ball bearings prevents metal-to-metal contact, encased to help prevent dirt, dust, sand and other foreign materials from damaging bearings for long life, less friction, smoother spin and wear resistance. Heavy-duty steel spider braces and case-hardened steel shaft for long-lasting strength/durability. Simple, mechanically-locked, two-piece head/base for faster, easier installation. Pre-punched bottom/crimped collar of one-piece base fits tighter, makes installation easier and allows for adjustability up to 12/12 pitch without removing turbine. Extra-large flashing and head with included bottom ring for easier installation and better weather protection. Double ribbed vanes, with convex top, direct even wind-driven rain away from the unit. Dade County/Texas Department of Insurance approved.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Permanently lubricated track system, upper and lower stainless steel ball bearings prevents metal-to-metal contact, encased to help prevent dirt, dust, sand and other foreign materials from damaging bearings for long life, less friction, smoother spin and wear resistance. Heavy-duty steel spider braces and case-hardened steel shaft for long-lasting strength/durability. Simple, mechanically-locked, two-piece head/base for faster, easier installation. Pre-punched bottom/crimped collar of one-piece base fits tighter, makes installation easier and allows for adjustability up to 12/12 pitch without removing turbine. Extra-large flashing and head with included bottom ring for easier installation and better weather protection. Double ribbed vanes, with convex top, direct even wind-driven rain away from the unit. Dade County/Texas Department of Insurance approved.
|
Permanently lubricated track system, upper and lower stainless steel ball bearings prevents metal-to-metal contact, encased to help prevent dirt, dust, sand and other foreign materials from damaging bearings for long life, less friction, smoother spin and wear resistance. Heavy-duty steel spider braces and case-hardened steel shaft for long-lasting strength/durability. Simple, mechanically-locked, two-piece head/base for faster, easier installation. Pre-punched bottom/crimped collar of one-piece base fits tighter, makes installation easier and allows for adjustability up to 12/12 pitch without removing turbine. Extra-large flashing and head with included bottom ring for easier installation and better weather protection. Double ribbed vanes, with convex top, direct even wind-driven rain away from the unit. Dade County/Texas Department of Insurance approved.
|
Permanently lubricated track system, upper and lower stainless steel ball bearings prevents metal-to-metal contact, encased to help prevent dirt, dust, sand and other foreign materials from damaging bearings for long life, less friction, smoother spin and wear resistance. Heavy-duty steel spider braces and case-hardened steel shaft for long-lasting strength/durability. Simple, mechanically-locked, two-piece head/base for faster, easier installation. Pre-punched bottom/crimped collar of one-piece base fits tighter, makes installation easier and allows for adjustability up to 12/12 pitch without removing turbine. Extra-large flashing and head with included bottom ring for easier installation and better weather protection. Double ribbed vanes, with convex top, direct even wind-driven rain away from the unit. Dade County/Texas Department of Insurance approved.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Installed on an existing base from a whirly bird or turbine vent, both 12 or 14 in. Intended for a sloped, shingled roof to ventilate hot, moist attic air as a part of a balanced ventilation system. Installed within 24 in of the roof's peak.
|
Permanently lubricated track system, upper and lower stainless steel ball bearings prevents metal-to-metal contact, encased to help prevent dirt, dust, sand and other foreign materials from damaging bearings for long life, less friction, smoother spin and wear resistance. Heavy-duty steel spider braces and case-hardened steel shaft for long-lasting strength/durability. Simple, mechanically-locked, two-piece head/base for faster, easier installation. Pre-punched bottom/crimped collar of one-piece base fits tighter, makes installation easier and allows for adjustability up to 12/12 pitch without removing turbine. Extra-large flashing and head with included bottom ring for easier installation and better weather protection. Double ribbed vanes, with convex top, direct even wind-driven rain away from the unit. Dade County/Texas Department of Insurance approved.
|
Galvanized construction, externally braced for added strength. Heavy-duty construction ideal for coastal and high wind areas. Simple, two-piece assembly for faster installation. Permanently lubricated dual bearing system for long-lasting performance. Stainless steel ball bearings. 720 cfm air movement. No.GC12E Dade County Approved 02-0524.03. Nos.GC12EF and GC12EWWF Florida Building Code (FBC) Approved FL5027.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Permanently lubricated track system, upper and lower stainless steel ball bearings prevents metal-to-metal contact, encased to help prevent dirt, dust, sand and other foreign materials from damaging bearings for long life, less friction, smoother spin and wear resistance. Heavy-duty steel spider braces and case-hardened steel shaft for long-lasting strength/durability. Simple, mechanically-locked, two-piece head/base for faster, easier installation. Pre-punched bottom/crimped collar of one-piece base fits tighter, makes installation easier and allows for adjustability up to 12/12 pitch without removing turbine. Extra-large flashing and head with included bottom ring for easier installation and better weather protection. Double ribbed vanes, with convex top, direct even wind-driven rain away from the unit. Dade County/Texas Department of Insurance approved.
|
Permanently lubricated track system, upper and lower stainless steel ball bearings prevents metal-to-metal contact, encased to help prevent dirt, dust, sand and other foreign materials from damaging bearings for long life, less friction, smoother spin and wear resistance. Heavy-duty steel spider braces and case-hardened steel shaft for long-lasting strength/durability. Simple, mechanically-locked, two-piece head/base for faster, easier installation. Pre-punched bottom/crimped collar of one-piece base fits tighter, makes installation easier and allows for adjustability up to 12/12 pitch without removing turbine. Extra-large flashing and head with included bottom ring for easier installation and better weather protection. Double ribbed vanes, with convex top, direct even wind-driven rain away from the unit. Dade County/Texas Department of Insurance approved.
|
High-impact resin. Scratch, crush and dent-resistant, with UV inhibitors to keep consistent color. 12% larger flashing with pre-drilled nail holes and a built-in screen to deter birds and rodents and prevent clogging. Slant back design to prevent weather infiltration especially in deep slope applications. Hood is snapped in place rather than tacked to reduce the chance of blow-off. 11-3/4 in x 10-3/4 in opening, 20-1/4 in x 18 in flashing, 5-7/8 in H. 65 sq-in of net-free ventilating area. CSA listed.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The PROTurbo combines the field tested benefits of the patented WeatherPRO internal baffle system with multi-stage, high volume, airflow for superior attic ventilation.
|
Installed on a sloped, shingled roof to ventilate hot, moist attic air as a part of a balanced ventilation system. Installed within 24 in of the roof's peak. The PROTurbo combines the field tested benefits of the patented WeatherPRO internal baffle system with multi-stage, high-volume, airflow for attic ventilation.
|
High-impact resin. Scratch, crush and dent-resistant, with UV inhibitors to keep consistent color. 12% larger flashing with pre-drilled nail holes and a built-in screen to deter birds and rodents and prevent clogging. Slant back design to prevent weather infiltration especially in deep slope applications. Hood is snapped in place rather than tacked to reduce the chance of blow-off. 11-3/4 in x 10-3/4 in opening, 20-1/4 in x 18 in flashing, 5-7/8 in H. 65 sq-in of net-free ventilating area. CSA listed.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
High-impact resin. Scratch, crush and dent-resistant, with UV inhibitors to keep consistent color. 12% larger flashing with pre-drilled nail holes and a built-in screen to deter birds and rodents and prevent clogging. Slant back design to prevent weather infiltration especially in deep slope applications. Hood is snapped in place rather than tacked to reduce the chance of blow-off. 11-3/4 in x 10-3/4 in opening, 20-1/4 in x 18 in flashing, 5-7/8 in H. 65 sq-in of net-free ventilating area. CSA listed.
|
High-impact resin. Scratch, crush and dent-resistant, with UV inhibitors to keep consistent color. 12% larger flashing with pre-drilled nail holes and a built-in screen to deter birds and rodents and prevent clogging. Slant back design to prevent weather infiltration especially in deep slope applications. Hood is snapped in place rather than tacked to reduce the chance of blow-off. 11-3/4 in x 10-3/4 in opening, 20-1/4 in x 18 in flashing, 5-7/8 in H. 65 sq-in of net-free ventilating area. CSA listed.
|
Our finest metal roof louver, with fully enclosed hood to help prevent rodent/insect infiltration and leaf/pine needle clogging.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Our finest metal roof louver, with fully enclosed hood to help prevent rodent/insect infiltration and leaf/pine needle clogging.
|
Scratch, dent and crush-resistant high-impact resin plastic. 10 in x 10 in opening, 17-5/16 in x 16-13/16 in flashing. 50 sq-in of net-free ventilating area. CSA listed.
|
Scratch, dent and crush-resistant high-impact resin plastic. 10 in x 10 in opening, 17-5/16 in x 16-13/16 in flashing. 50 sq-in of net-free ventilating area. CSA listed.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Scratch, dent and crush-resistant high-impact resin plastic. 10 in x 10 in opening, 17-5/16 in x 16-13/16 in flashing. 50 sq-in of net-free ventilating area. CSA listed.
|
Aluminum material resists rust. Fully enclosed hood to help prevent rodent/insect infiltration and leaf/pine needle clogging. Embossed finish hides scratches and resists wear. Larger flashing with pre-drilled nail holes makes installation easier, helps prevent leaks. 9-7/8 in opening, 16 in x 201/2 flashing dimension. 60 sq-in. of net-free ventilating area per vent. Dade County approved. Florida Building Code (FBC) approved for specified Sku's. CSA listed.
|
Our finest metal roof louver, with fully enclosed hood to help prevent rodent/insect infiltration and leaf/pine needle clogging.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Ideal for premium construction and for difficult applications like re-insulation and spray foam. "ProVent" may be installed prior to the soffit panel installation without fear of blowout. Made with Pro-Grade tear-resistant high-impact plastic. Rigid vent construction eliminates breakage during re-insulation. Full joist coverage for maximum air flow.
|
Square-top metal utility vent, recommended for kitchen duct outlets and bathroom fan exhausts as well as ventilation, large capacity of full 50 sq-in of net-free ventilating area (NFA) per vent, versatile, available with square throat in heavy-duty aluminum, easy to install, pre-drilled nail holes with extra wide flashing area. CSA listed.
|
Square-top metal utility vent, recommended for kitchen duct outlets and bathroom fan exhausts as well as ventilation, large capacity of full 50 sq-in of net-free ventilating area (NFA) per vent, versatile, available with square throat in heavy-duty aluminum, easy to install, pre-drilled nail holes with extra wide flashing area. CSA listed.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The polystyrene material provides a lightweight water-resistant air channel. Ideal for high volume new construction or lower cost re-insulation.
|
Ideal for premium construction and for difficult applications like re-insulation and spray foam. "ProVent" may be installed prior to the soffit panel installation without fear of blowout. Made with Pro-Grade tear-resistant high-impact plastic. Rigid vent construction eliminates breakage during re-insulation. Full joist coverage for maximum air flow.
|
Square-top metal utility vent, recommended for kitchen duct outlets and bathroom fan exhausts as well as ventilation, large capacity of full 50 sq-in of net-free ventilating area (NFA) per vent, versatile, available with square throat in heavy-duty aluminum, easy to install, pre-drilled nail holes with extra wide flashing area. CSA listed.
|
|
|
VIEW MAP & PHOTO GALLERY | CALL US: 406-466-3100
