|
|
|
|
|
|
|
|
|
|
|
|
|
|
Fasade J-Trim Backsplash, Thermoplastic, Smoked Pewter, 18 in L
|
Midwest Products Sheet, Basswood, 36 in L, 3 in W, 1/16 in Thick
|
Midwest Products Sheet, Basswood, 36 in L, 3 in W, 1/8 in Thick
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Cloverdale Replacement Single Bevel Edge Trimmer Blade, Dimensions: 1/64 x 3/4 x 1-3/4 in, Suitable for: 33437 Edge Trimmer
|
Midwest Products Sheet, Basswood, 36 in L, 3 in W, 3/32 in Thick
|
Fasade Backsplash Inside Corner Trim, PVC, White, Matte, 18 in L, Suitable for: Backsplash Panels
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Fasade J-Trim, PVC, White, Matte, 18 in L
|
Fasade Backsplash Inside Corner Trim, Thermoplastic, Smoked Pewter, 18 in L
|
Appearance-grade, southern yellow pine. MCA treatment, above ground contact.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Waddell Shaker Peg, Hardwood, 1/2 in Diameter, 2-1/2 in Length
|
Midwest Products Basswood Sheet, 36 in L, 4 in W, 1/8 in Thick
|
No mitering decorative blocks. Installs with a hammer and finishing nails. Pine wood.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
No mitering decorative blocks. Installs with a hammer and finishing nails. Pine wood.
|
No mitering decorative blocks. Installs with a hammer and finishing nails. Pine wood.
|
Palclad wall and ceiling liner panels are ideally suited for both industrial and residential interior applications. These waterproof panels are lightweight, have an attractive surface texture, absorb scratches and clean up very easily. Palclad is a cost-effective alternative to traditional FRP panels. Manufactured from 100% recycled content.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
WallTuf Inside Corner Moulding, Inside Corner, Vinyl, White, 8 ft L
|
WallTuf End Cap Moulding, Vinyl, White, 8 ft L, Suitable for: WallTuf Liner Panels
|
Waddell Shaker Peg, Hardwood, 1/2 in Diameter, 1-3/4 in Length
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
WallTuf Divider Moulding, White, Vinyl, 8 ft Actual Length
|
ALEXANDRIA Moulding Common Board, 1 in Nominal Thickness, 4 in Width, 4 ft Length
|
Used under Sun-n-Rain panels on each cross support or purlin. Provides support for fasteners when attaching panels to framing. Custom profile matches pitch and depth of panel corrugation.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Woodtite 1 in screw (sku 940.4302) with EPDM washer is used to fasten PVC, Sun-n-Rain and Palruf or Polycarbonate, Suntop and Suntuf, corrugated panels in a siding or cladding application and Woodtite 2 in screw (sku 171.0235) also with EPDM washer is used to crown fasten PVC, Sun-n-Rain and Palruf or Polycarbonate, Suntop and Suntuf, corrugated panels in a roofing application.
|
No mitering decorative blocks. Installs with a hammer and finishing nails. Pine wood.
|
No mitering decorative blocks. Installs with a hammer and finishing nails. Pine wood.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
No mitering decorative blocks. Installs with a hammer and finishing nails. Pine wood.
|
Used under Suntuf? panels on each cross support or purlin. Provides support for fasteners when attaching panels to framing. Custom profile matches pitch and depth of panel corrugation.
|
Used under Palruf? or Suntop panels on each cross support or purlin. Provides support for fasteners when attaching panels to framing. Custom profile matches pitch and depth of panel corrugation.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Woodtite 1 in screw (sku 940.4302) with EPDM washer is used to fasten PVC, Sun-n-Rain and Palruf or Polycarbonate, Suntop and Suntuf, corrugated panels in a siding or cladding application and Woodtite 2 in screw (sku 171.0235) also with EPDM washer is used to crown fasten PVC, Sun-n-Rain and Palruf or Polycarbonate, Suntop and Suntuf, corrugated panels in a roofing application.
|
Sanded on four sides.
|
Use under Palram's corrugated panels to close off vertical edges for a finished look.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Midwest Products Wood Strip, Nominal Thickness: 1/8 in, Nominal Width: 1/8 in, Nominal Length: 24 in
|
Used to cap off the edges of a lattice panel, manufactured from high density polyethylene recycled plastic, can be sawed, sanded, nailed and drilled with results superior to wood.
|
Used to cap off the edges of a lattice panel, manufactured from high density polyethylene recycled plastic, can be sawed, sanded, nailed and drilled with results superior to wood.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Use on desktop, antique, shelving cabinets, crafts, hobbies and more. Applies to wood, plywood particle board, hardboard, metal and more. Prefinished and colorfast. Heat and stain-resistant, washable and static-free. Flexible and durable (not recommended for surface subject to sharp tools). Trims with edge trimmer or utility knife. Cut edge 1/2 in longer than surface to be covered with preheat (400 deg) iron, press length of edging till glue has melted while still hot, press edging down firmly with wood block or re-apply. Carded.
|
Used under Suntuf? panels on each cross support or purlin. Provides support for fasteners when attaching panels to framing. Custom profile matches pitch and depth of panel corrugation.
|
Use on desktop, antique, shelving cabinets, crafts, hobbies and more. Pre-sanded and ready to finish. Trims with edge trimmer or utility knife. Paper backed with a resin-impregnated paper that prevents splitting. Furniture-grade, pre-sanded and ready to finish as desired with preheated (400 deg) iron, press length of edging till glue has melted if mistake in application is made, simply reheat and re-apply. Allow edging to cool completely before finishing other pieces.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Use on desktop, antique, shelving cabinets, crafts, hobbies and more. Pre-sanded and ready to finish. Trims with edge trimmer or utility knife. Paper backed with a resin-impregnated paper that prevents splitting. Furniture-grade, pre-sanded and ready to finish as desired with preheated (400 deg) iron, press length of edging till glue has melted if mistake in application is made, simply reheat and re-apply. Allow edging to cool completely before finishing other pieces.
|
Tuftex Round Closure Strip, 3 ft L, Foam, Horizontal Mounting, Suitable for: Tuftex SeaCoaster PVC Panel
|
Tuftex Round Closure Strip, 8 ft L, Wood, Natural Wood, Horizontal Mounting
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Tuftex Multi-Wall U-Channel, Trim Type: Corrugated, 8 ft L, 1/2 ft W, Polycarbonate, Clear
|
Appearance-grade, white pine. MCA treatment, above ground contact.
|
Appearance-grade, white pine. MCA treatment, above ground contact.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Self-drilling tapping screws for fastening polycarbonate and PVC directly to aluminum and steel supporting members. Hex-head with weatherseal washer.
|
Do-it-yourself peel and stick tiles are lightweight, easy to handle, cut and maintain. Sticks without adding extra glue, does not yellow or crack with time. Can be installed in minutes over a clean and smooth surface without any mess or specialized tools. Designed for kitchen and bathroom environments, the tiles are resistant to the heat of stovetops and the humidity of bathrooms. Tiles can be cut to size with a razor blade and a straight edge or a sharp pair of scissors.
|
No mitering decorative blocks. Installs with a hammer and finishing nails. Pine wood.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Use on desktop, antique, shelving cabinets, crafts, hobbies and more. Applies to wood, plywood particle board, hardboard, metal and more. Prefinished and colorfast. Heat and stain-resistant, washable and static-free. Flexible and durable (not recommended for surface subject to sharp tools). Trims with edge trimmer or utility knife. Cut edge 1/2 in longer than surface to be covered with preheat (400 deg) iron, press length of edging till glue has melted while still hot, press edging down firmly with wood block or re-apply. Carded.
|
ALEXANDRIA Moulding Stud, Wood, 8 in Length, 4 in Width, 2 in Thickness
|
ALEXANDRIA Moulding Round Plywood, 3/4 in Actual Thickness, 11-3/4 in Actual Width
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Appearance-grade, white pine. MCA treatment, above ground contact.
|
ALEXANDRIA Moulding Common Board, 1 in Nominal Thickness, 4 in Width, 8 ft Length
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Used to join lattice panels together, manufactured from high density polyethylene recycled plastic, can be sawed, sanded, nailed and drilled with results superior to wood. 1-1/8 in W. Accommodates standard Universal Forest lattices.
|
Basswood is ideal for almost any project that requires wood and can be painted or stained to represent any wood type. Bag contains 72 cu-in.
|
No mitering decorative blocks. Installs with a hammer and finishing nails. Oak wood.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Appearance-grade, white pine. MCA treatment, above ground contact.
|
Cleanly cuts in both directions. Compact size. Provides exacting control for flush trimming wood veneer, melamine, PVC and polyester edgebanding. Measures 3 in x 2-1/4 in x 1 in.
|
Self-drilling tapping screws for fastening polycarbonate and PVC directly to aluminum and steel supporting members. Hex-head with weatherseal washer.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Rivets can be used in conjunction with adhesive when attaching Palclad panels to a substrate. 50/BG.
|
Surface mount for light fixture. Decoratively provides a level and waterproof surface for all exterior fixtures. Durable, maintenance-free, UV stabilized and constructed with color molded so they won't scratch, flake or fade. The patented snap-on trim ring makes installation easy. Fits all type of siding. 6-7/10 x 6-7/10 in.
|
Use on desktop, antique, shelving cabinets, crafts, hobbies and more. Pre-sanded and ready to finish. Trims with edge trimmer or utility knife. Paper backed with a resin-impregnated paper that prevents splitting. Furniture-grade, pre-sanded and ready to finish as desired with preheated (400 deg) iron, press length of edging till glue has melted if mistake in application is made, simply reheat and re-apply. Allow edging to cool completely before finishing other pieces.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Use on desktop, antique, shelving cabinets, crafts, hobbies and more. Pre-sanded and ready to finish. Trims with edge trimmer or utility knife. Paper backed with a resin-impregnated paper that prevents splitting. Furniture-grade, pre-sanded and ready to finish as desired with preheated (400 deg) iron, press length of edging till glue has melted if mistake in application is made, simply reheat and re-apply. Allow edging to cool completely before finishing other pieces.
|
Pine treated with Osomose weather shield (inhibits checking and cracking).
|
Used to join lattice panels together, manufactured from high density polyethylene recycled plastic, can be sawed, sanded, nailed and drilled with results superior to wood. 1-1/8 in W. Accommodates standard Universal Forest lattices.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Sanded on four sides.
|
UFP Moulded Handrail, 6 ft L, 4 ft W, 2 ft Thick
|
ALEXANDRIA Moulding Rectangular Plywood, 1/4 in Actual Thickness, 2 in Actual Width, 4 ft Actual Length, B-C Grade
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Used for installing short wire connections and hose bibs. Decoratively provides a level and waterproof surface for all exterior fixtures. Durable, maintenance-free, UV stabilized and constructed with color molded so they won't scratch, flake or fade. The patented snap-on trim ring makes installation easy. ID 3 in x 4-3/4 in. OD 4-1/2 in x 6-5/16 in.
|
Selected for appearance, grade, southern yellow pine MCA treatment, above ground contact.
|
Pine treated with Osomose weather shield (inhibits checking and cracking).
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Decoratively provides a level and waterproof surface for all exterior fixtures. Durable, maintenance-free, UV stabilized and constructed with color molded so they won't scratch, flake or fade. The patented snap-on trim ring makes installation easy. 5 x 6 in ID. 7 x 8 in OD.
|
UFP Lattice Panel, Grid Opening Size: 2-5/8 in, PVC, White, 8 ft Height, 2 ft Width, 1/8 in Thickness
|
Decoratively provides a level and waterproof surface for all exterior fixtures. Durable, maintenance-free, UV stabilized and constructed with color molded so they won't scratch, flake or fade. The patented snap-on trim ring makes installation easy; fits around existing pipes, wires and more. 3 x 4-3/4 in ID. 5 x 6-3/4 in OD.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Sanded on four sides.
|
ALEXANDRIA Moulding Common Board, 1 in Nominal Thickness, 6 in Width, 8 ft Length
|
ALEXANDRIA Moulding Stud, Wood, 8 in Length, 4 in Width, 2 in Thickness
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
UFP Stair Stringer, Number of Steps: 3, Rise Size: 6-3/4 in, Run Size: 10 in, Wood, Treated, Yellow, 35.64 in L, 11-1/4 in W, Suitable for: Ground Contact
|
Tops are cut off at an angle.
|
White hardwood boards.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Fasade inside corner trim pieces allow you to finish the corners of panels in a matching finish. The trims are easy to install and add a professional touch to any project. Simply cut with scissors or utility knife.
|
Fasade J-trims add a professional touch to your project. Just cut with scissors or utility knife and attach to any cut edge.
|
Fasade J-trims add a professional touch to your project. Just cut with scissors or utility knife and attach to any cut edge.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Fasade inside corner trim pieces allow you to finish the corners of panels in a matching finish. The trims are easy to install and add a professional touch to any project. Simply cut with scissors or utility knife.
|
Fasade inside corner trim pieces allow you to finish the corners of panels in a matching finish. The trims are easy to install and add a professional touch to any project. Simply cut with scissors or utility knife.
|
Fasade J-trims add a professional touch to your project. Just cut with scissors or utility knife and attach to any cut edge.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
ALEXANDRIA Moulding Stud, Wood, 8 in Length, 6 in Width, 2 in Thickness
|
Perfect for backsplash, walls and accents; each tile covers 1 square foot; easy peel & stick application.
|
ALEXANDRIA Moulding Standard Perforated Hardboard, Plywood, 4 ft Overall Width, 4 ft Overall Height, 3/16 in Overall Depth
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Has a close and tight homogeneous grain structure that makes it ideal for a wide variety of hobby, craft and miniature projects. May be painted or stained to represent any wood type. Great finishing qualities. Strong and lightweight.
|
ALEXANDRIA Moulding Common Board, 1 in Nominal Thickness, 8 in Width, 8 ft Length
|
Tuftex Multi-Wall H-Channel, Trim Type: Corrugated, 8 ft L, 1/4 ft W, Polycarbonate, Clear
|
|
|
VIEW MAP & PHOTO GALLERY | CALL US: 406-466-3100