|
|
|
|
|
|
|
|
|
|
|
|
|
|
National Hardware V211S Bracket Screw, Steel, Zinc
|
Fits up to 1-3/8 in Dia closet poles. Reinforced design allows for interior and exterior uses. Single screw mounting. Includes one pair of pole sockets and screws.
|
National Hardware V108S Bracket Screw, Steel, White
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
ClosetMaid Shelf End Cap, Dimensions: 1/4 in Dia x 0.4 in D, Plastic, White, Suitable for: ClosetMaid Shelf and Rod Shelving, Includes: (10) Small End Caps and (4) Large End Caps
|
Fits up to 1-3/8 in Dia closet poles. Includes one pair of pole sockets and screws.
|
National Hardware V211S Bracket Screw, Steel, White
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Can be used as a support or brace. Strengths exceed ANSI/BHMA standards. Brackets are designed for use with standard dimensional lumber. First measurement indicates nominal width of shelf leg, second measurement denotes nominal length of wall leg. Bulk pack.
|
National Hardware MPB107 Pole Socket Set, Polypropylene, White, Suitable for: Up to 1-3/8 in Dia Pole, Includes: Fasteners
|
National Hardware BPB107 Pole Socket Set, Polypropylene, White, Suitable for: Up to 1-3/8 in Dia Pole, Includes: Fasteners
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The ProSource shelf bracket dimensions are 1/16 in W x 2-3/8 in H x selected depth. Suitable to use with ProSource shelving. The UPC is tagged.
|
"Accepts a 1-3/8"" diameter standard wood pole. 2-3/16""OD x 3/4"" overall. Includes one pair of pole sockets and two No.8 x 3/4"" Phillips flat head screws."
|
The U 10165 is a shelf support peg, with a 5 mm diameter. Steel plated construction, used by many cabinet manufacturers. 25 lb maximum safe load per peg.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
National Hardware V107 Pole Socket Set, Polypropylene, White, Suitable for: Up to 1-3/8 in Dia Pole, Includes: Fasteners
|
1-3/8 in Dia with single screw mounting. Includes two pieces of-3/4 in screws and pole sockets.
|
Fits up to 1-3/8 in Dia closet poles. Includes one pair of pole sockets and screws.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Fits up to 1-3/8 in Dia closet poles. Reinforced design allows for interior and exterior uses. Single screw mounting. Includes one pair of pole sockets and screws.
|
SuperSlide? shelving and hardware allows hangers to slide freely on both fixed-mount and ShelfTrack mounting systems. The heavy-duty preloaded bracket with anchor easily mounts to the wall and holds the end of the SuperSlide? shelf and hang rod.
|
Single track adjustable wall standard. Dimensions of 5/8 in W x 24 in H x selected length. For use with ProSource shelving. UPC tagged.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The U 10156 is a plastic shelf support peg with a 3 mm diameter steel peg, to provide extra strength when needed. Used by many cabinet manufacturers. 10 lb maximum safe load per peg.
|
ClosetMaid Support Bracket, 12 in Length, 2 in Width, 2 in Height, White, Steel
|
Pilasters for built-in shelving and book case applications. Adjustable on 1/2 in centers. 23 ga high-strength steel with a dimension of 5/8 in W x 3/16 in D.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Use for mounting 1 in wood or steel closet poles. Satin brass color.
|
The U 10166 is a shelf support peg, with a 1/4 in Dia. Steel plated construction, used by many cabinet manufacturers. 25 lb maximum safe load per peg.
|
Use to join two shelves together to create a continuous run of shelving.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Allows installation of 2 shelf and rod brackets to the wall and 1 shelf to the brackets. Four 1-1/2 in pan head screws for mounting brackets to the wall. Four 3/4 in pan head screws for mounting shelf to the brackets. For best use install in wall studs. For use with 108 shelf and rod bracket.
|
1-3/8 in Dia with single screw mounting. Includes two pieces of-3/4 in screws and pole sockets.
|
Knape & Vogt Closet Pole End Cap, Plastic
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
White plastic, packaged on pegable card.
|
For use with cabinets and storage cabinets with glass shelves.
|
The U 10163 is a shelf support peg, with a 1/4 in Dia. Steel plated construction, used by many cabinet manufacturers. 25 lb maximum safe load per peg.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The ClosetMaid? traditional fixed mount system is the original, economical way to install ventilated wire shelving. Wall clip attaches to the back of shelving to anchor shelf to the wall.
|
U 10136 is a shelf support peg with a 1/4 in Dia. Plastic construction and used by many cabinet manufacturers. The 5 lb maximum safe load per peg.
|
National Hardware DPB103 Pole Socket Set, Dimensions: 1-3/8 in Dia, Wood, Natural, Suitable for: Up to 1-3/8 in Dia Pole, Includes: Fasteners
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For use with the 80 Series standards. For shelving applications in light industrial, commercial and residential use. Standards can be mounted to nearly any type of wall. For storage and display applications in retail stores, grocery stores, light warehouses, repair garages, maintenance storage, business office storage and residential storage. Reinforced brackets lock into slotted standards for strong, secure weight-bearing support. Fully adjustable in 1 in increments. 16 ga cold rolled steel construction. Tested to meet or exceed ANSI performance standards as established by BHMA.
|
SuperSlide? shelving and hardware allows hangers to slide freely on both fixed-mount and ShelfTrack? mounting systems.
|
For use with the 80 Series standards. For shelving applications in light industrial, commercial and residential use. Standards can be mounted to nearly any type of wall. For storage and display applications in retail stores, grocery stores, light warehouses, repair garages, maintenance storage, business office storage and residential storage. Reinforced brackets lock into slotted standards for strong, secure weight-bearing support. Fully adjustable in 1 in increments. 16 ga cold rolled steel construction. Tested to meet or exceed ANSI performance standards as established by BHMA.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Converts shelf and rod shelving, 12 in and 16 in deep, to a continuous slide. Just add the brackets and choose your length of ClosetMaid? hang rod. Hang rod snaps into bracket to create an continuous slide for hangers.
|
Designed to fit into the fast mount standards and load tested to 100 lb.
|
For use with the 80 Series standards. For shelving applications in light industrial, commercial and residential use. Standards can be mounted to nearly any type of wall. For storage and display applications in retail stores, grocery stores, light warehouses, repair garages, maintenance storage, business office storage and residential storage. Reinforced brackets lock into slotted standards for strong, secure weight-bearing support. Fully adjustable in 1 in increments. 16 ga cold rolled steel construction. Tested to meet or exceed ANSI performance standards as established by BHMA.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For use with the 80 Series standards. For shelving applications in light industrial, commercial and residential use. Standards can be mounted to nearly any type of wall. For storage and display applications in retail stores, grocery stores, light warehouses, repair garages, maintenance storage, business office storage and residential storage. Reinforced brackets lock into slotted standards for strong, secure weight-bearing support. Fully adjustable in 1 in increments. 16 ga cold rolled steel construction. Tested to meet or exceed ANSI performance standards as established by BHMA.
|
For use with the 80 Series standards. For shelving applications in light industrial, commercial and residential use. Standards can be mounted to nearly any type of wall. For storage and display applications in retail stores, grocery stores, light warehouses, repair garages, maintenance storage, business office storage and residential storage. Reinforced brackets lock into slotted standards for strong, secure weight-bearing support. Fully adjustable in 1 in increments. 16 ga cold rolled steel construction. Tested to meet or exceed ANSI performance standards as established by BHMA.
|
Heavy-duty preloaded bracket with anchor easily mounts to the wall and holds the end of any size ClosetMaid? shelf. Provides side wall support. Supports front lip of shelving where it meets the side wall. For drywall installations. Measures 2-7/8 in H x 2-1/8 in W x 1-3/4 in D. Made from resin.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Support Bracket, 20 in Length, 2 in Width, 2 in Height, White, Steel
|
N 6794 is a set of machined hardwood closet pole sockets. They fit the standard 1-3/8 in closet pole. They have a natural finish and can be stained or painted if desired. There are two hardwood sockets and fasteners included in the package.
|
National Hardware V103 Pole Socket Set, Dimensions: 1-3/8 in Dia, Wood, Natural, Suitable for: Up to 1-3/8 in Dia Pole, Includes: Fasteners
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Pilasters for built-in shelving and book case applications. Adjustable on 1/2 in centers. 23 ga high-strength steel with a dimension of 5/8 in W x 3/16 in D.
|
Pilasters for built-in shelving and book case applications. Adjustable on 1/2 in centers. 23 ga high-strength steel with a dimension of 5/8 in W x 3/16 in D.
|
For use with the 80 Series standards. For shelving applications in light industrial, commercial and residential use. Standards can be mounted to nearly any type of wall. For storage and display applications in retail stores, grocery stores, light warehouses, repair garages, maintenance storage, business office storage and residential storage. Reinforced brackets lock into slotted standards for strong, secure weight-bearing support. Fully adjustable in 1 in increments. 16 ga cold rolled steel construction. Tested to meet or exceed ANSI performance standards as established by BHMA.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For use with the 80 Series standards. For shelving applications in light industrial, commercial and residential use. Standards can be mounted to nearly any type of wall. For storage and display applications in retail stores, grocery stores, light warehouses, repair garages, maintenance storage, business office storage and residential storage. Reinforced brackets lock into slotted standards for strong, secure weight-bearing support. Fully adjustable in 1 in increments. 16 ga cold rolled steel construction. Tested to meet or exceed ANSI performance standards as established by BHMA.
|
For use with the 80 Series standards. For shelving applications in light industrial, commercial and residential use. Standards can be mounted to nearly any type of wall. For storage and display applications in retail stores, grocery stores, light warehouses, repair garages, maintenance storage, business office storage and residential storage. Reinforced brackets lock into slotted standards for strong, secure weight-bearing support. Fully adjustable in 1 in increments. 16 ga cold rolled steel construction. Tested to meet or exceed ANSI performance standards as established by BHMA.
|
For use with the 80 Series standards. For shelving applications in light industrial, commercial and residential use. Standards can be mounted to nearly any type of wall. For storage and display applications in retail stores, grocery stores, light warehouses, repair garages, maintenance storage, business office storage and residential storage. Reinforced brackets lock into slotted standards for strong, secure weight-bearing support. Fully adjustable in 1 in increments. 16 ga cold rolled steel construction. Tested to meet or exceed ANSI performance standards as established by BHMA.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For use with the 80 Series standards. For shelving applications in light industrial, commercial and residential use. Standards can be mounted to nearly any type of wall. For storage and display applications in retail stores, grocery stores, light warehouses, repair garages, maintenance storage, business office storage and residential storage. Reinforced brackets lock into slotted standards for strong, secure weight-bearing support. Fully adjustable in 1 in increments. 16 ga cold rolled steel construction. Tested to meet or exceed ANSI performance standards as established by BHMA.
|
The U 10171 is a shelf support peg, with a 5 mm diameter peg and 5/32 in screw mounting hole. Steel-plated construction, used in many shelf support applications. 20 lb maximum safe load per peg.
|
Single track adjustable wall standard. Dimensions of 5/8 in W x 36 in H x selected length. For use with ProSource shelving. UPC tagged.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Pilasters for built-in shelving and book case applications. Adjustable on 1/2 in centers. 23 ga high-strength steel with a dimension of 5/8 in W x 3/16 in D.
|
National Hardware Shelf and Rod Bracket, 125 lb Weight, 12.74 in Length, 9.31 in Width, 0.84 in Height, White, Steel
|
The ProSource shelf support is ideal for shelf support in cabinetry and furniture. Made of steel and zinc. Dimensions: 1/4 in H x 9 in L x 3 in W.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
John Sterling Heavyweight? diamond plate shelving and pegboard system is built to withstand the tough demands of workshop or garage.
|
Made of heavy-duty steel covered with high-impact plastic. Italian design. Functional and attractive.
|
Features twice the slots for more strength. Two 10-1/2 in brackets mounted to twin-slotted standards support up to 300 lb per shelf when installed according to manufacturer's directions.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For use with the 80 Series standards. For shelving applications in light industrial, commercial and residential use. Standards can be mounted to nearly any type of wall. For storage and display applications in retail stores, grocery stores, light warehouses, repair garages, maintenance storage, business office storage and residential storage. Reinforced brackets lock into slotted standards for strong, secure weight-bearing support. Fully adjustable in 1 in increments. 16 ga cold rolled steel construction. Tested to meet or exceed ANSI performance standards as established by BHMA.
|
For use with the 80 Series standards. For shelving applications in light industrial, commercial and residential use. Standards can be mounted to nearly any type of wall. For storage and display applications in retail stores, grocery stores, light warehouses, repair garages, maintenance storage, business office storage and residential storage. Reinforced brackets lock into slotted standards for strong, secure weight-bearing support. Fully adjustable in 1 in increments. 16 ga cold rolled steel construction. Tested to meet or exceed ANSI performance standards as established by BHMA.
|
For use with the 80 Series standards. For shelving applications in light industrial, commercial and residential use. Standards can be mounted to nearly any type of wall. For storage and display applications in retail stores, grocery stores, light warehouses, repair garages, maintenance storage, business office storage and residential storage. Reinforced brackets lock into slotted standards for strong, secure weight-bearing support. Fully adjustable in 1 in increments. 16 ga cold rolled steel construction. Tested to meet or exceed ANSI performance standards as established by BHMA.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For use with the 80 Series standards. For shelving applications in light industrial, commercial and residential use. Standards can be mounted to nearly any type of wall. For storage and display applications in retail stores, grocery stores, light warehouses, repair garages, maintenance storage, business office storage and residential storage. Reinforced brackets lock into slotted standards for strong, secure weight-bearing support. Fully adjustable in 1 in increments. 16 ga cold rolled steel construction. Tested to meet or exceed ANSI performance standards as established by BHMA.
|
For use with the 80 Series standards. For shelving applications in light industrial, commercial and residential use. Standards can be mounted to nearly any type of wall. For storage and display applications in retail stores, grocery stores, light warehouses, repair garages, maintenance storage, business office storage and residential storage. Reinforced brackets lock into slotted standards for strong, secure weight-bearing support. Fully adjustable in 1 in increments. 16 ga cold rolled steel construction. Tested to meet or exceed ANSI performance standards as established by BHMA.
|
ClosetMaid Support Bracket, White, Steel, Includes: (1) #8 Pin, (1) Anchor
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The ProSource shelf bracket is made from a heavy duty steel construction.
|
For use with the 180 series brackets. Standards can be mounted to nearly any type of wall. Reinforced brackets lock into slotted standard for strong, secure weight bearing support. Fully adjustable 1 in increments. 16 ga steel construction. Dimensions of 5/8 in W x 13/32 in H x selected length.
|
Snaps securely into place. For use with #233 and #255. High-strength steel construction.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For 1-1/4 in Dia closet poles. Also fits up to 1-3/8 in Dia poles. Mounting screws included.
|
Holds up to 500 lb per pair. For 12 in deep shelf.
|
Pilasters for built-in shelving and book case applications. Adjustable on 1/2 in centers. 23 ga high-strength steel with a dimension of 5/8 in W x 3/16 in D.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For use with the 80 Series standards. For shelving applications in light industrial, commercial and residential use. Standards can be mounted to nearly any type of wall. For storage and display applications in retail stores, grocery stores, light warehouses, repair garages, maintenance storage, business office storage and residential storage. Reinforced brackets lock into slotted standards for strong, secure weight-bearing support. Fully adjustable in 1 in increments. 16 ga cold rolled steel construction. Tested to meet or exceed ANSI performance standards as established by BHMA.
|
Screws are 1-1/2 in long with a #8 body and #6 head.
|
Screws are 1-1/2 in long with a #8 body and #6 head.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Fits up to 1-3/8 in Dia closet pole or 1 in Dia pipe. Hardwood construction for maximum strength, extra deep holes for dropout prevention. Screws for each part included to make mounting quick, easy and strong. Made from linden wood. Includes one pair of pole sockets.
|
Pilasters for built-in shelving and book case applications. Adjustable on 1/2 in centers. 23 ga high-strength steel with a dimension of 5/8 in W x 3/16 in D.
|
For use with the 80 Series standards. For shelving applications in light industrial, commercial and residential use. Standards can be mounted to nearly any type of wall. For storage and display applications in retail stores, grocery stores, light warehouses, repair garages, maintenance storage, business office storage and residential storage. Reinforced brackets lock into slotted standards for strong, secure weight-bearing support. Fully adjustable in 1 in increments. 16 ga cold rolled steel construction. Tested to meet or exceed ANSI performance standards as established by BHMA.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Double-lug bracket design prevents shelves and contents from falling when bumped. Supports adjust to accommodate changes in storage and layout. Rounded corners and recessed groove design. Cover strips conceal screw holes and slots for a more refined appearance. Epoxy finish is resistant to chips and scratches.
|
Double-lug bracket design prevents shelves and contents from falling when bumped. Supports adjust to accommodate changes in storage and layout. Rounded corners and recessed groove design. Cover strips conceal screw holes and slots for a more refined appearance. Epoxy finish is resistant to chips and scratches.
|
For use with the 80 Series standards. For shelving applications in light industrial, commercial and residential use. Standards can be mounted to nearly any type of wall. For storage and display applications in retail stores, grocery stores, light warehouses, repair garages, maintenance storage, business office storage and residential storage. Reinforced brackets lock into slotted standards for strong, secure weight-bearing support. Fully adjustable in 1 in increments. 16 ga cold rolled steel construction. Tested to meet or exceed ANSI performance standards as established by BHMA.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Double-lug bracket design prevents shelves and contents from falling when bumped. Supports adjust to accommodate changes in storage and layout. Rounded corners and recessed groove design. Cover strips conceal screw holes and slots for a more refined appearance. Epoxy finish is resistant to chips and scratches.
|
Comes with 1/4 in Dia x 7/16 in L pin. Polybagged.
|
National Hardware Pole Socket Set, Steel, Brass, Includes: (2) Socket, Fasteners
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
National Hardware SPB105 Pole Socket Set, Dimensions: 0.38 in D, Steel, Brass, Suitable for: Up to 1-3/8 in Dia Pole, Includes: Fasteners
|
Double-lug bracket design prevents shelves and contents from falling when bumped. Supports adjust to accommodate changes in storage and layout. Rounded corners and recessed groove design. Cover strips conceal screw holes and slots for a more refined appearance. Epoxy finish is resistant to chips and scratches.
|
Double-lug bracket design prevents shelves and contents from falling when bumped. Supports adjust to accommodate changes in storage and layout. Rounded corners and recessed groove design. Cover strips conceal screw holes and slots for a more refined appearance. Epoxy finish is resistant to chips and scratches.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Double-lug bracket design prevents shelves and contents from falling when bumped. Supports adjust to accommodate changes in storage and layout. Rounded corners and recessed groove design. Cover strips conceal screw holes and slots for a more refined appearance. Epoxy finish is resistant to chips and scratches.
|
Designed for mounting shelves and closet rods in closets, storage rooms. Rod mounts on 3 in drop for easy hanger use. Mount to stud for optimal load capacity. Punched for #12 wood screws. Bulk bagged.
|
|
|
|
VIEW MAP & PHOTO GALLERY | CALL US: 406-466-3100