|
|
|
|
|
|
|
|
|
|
|
|
|
|
N 6565 is a white nylon floor guide for a single 1-3/8 in thick door. Often used on pocket doors as well as bi-pass door systems. Used by several door manufacturers.
|
N 6566 is a pocket door guide for 1-3/8 in thick doors. It is a universal fit used by many pocket door manufacturers. Made of stamped steel with nylon guide tips, it mounts onto the bottom of the pocket door opening and under the trim. It keeps the door from hitting side to side as it slides back and forth.
|
N 6567 is a set of 2 white nylon floor guides for a single door that is any thickness. Often used on pocket doors as well as bi-pass door systems. Used by several door manufacturers.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
N 6578 is a nylon pocket door guide for 1-3/8 in thick doors. It is a universal fit used by many pocket door manufacturers that is nailed onto the jamb under the trim. It keeps the door from hitting side to side as it slides back and forth.
|
RENIN Door Guide, Metal, Floor Mounting, Suitable for: 3/4 to 1-3/8 in Single Pocket Doors
|
N 7015 is a set of left and right hand nylon pocket door guides that can be used for any thickness door. It is a universal fit used by many pocket door manufacturers that is screwed onto the jamb under the trim. It has slotted holes for adjustment in or out. It keeps the door from hitting side to side as it slides back and forth.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
PD120P Pocket door guide set. Keeps pocket door centered in the opening, so it can easily slide without contacting the frame. Made of resistant nylon in white finish.
|
Brass plated die-cast pull. Pull retracts from flush position. Fits on a 5/8 x 3-1/2 in mortise, 3/4 in deep. Contents 1 pull, two #8 x 3/4 in Phillips flat head sheet metal screws.
|
PD118P allows the connection of two pocket door frames. Steel plates install on front & back of header for a sturdy connection.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Fits doors 1-3/8 to 1-1/2 in thick. Pre-assembled for doors opening left to right. Plates are reversible for doors opening right to left. Overall size of 2-3/4 in H x 2-1/2 in D.
|
N 7410 is a four wheeled pocket door roller assembly used on a double track that has a 1-5/8 in inside width with a 1-3/16 in center to center measurement. The four 1 in Dia nylon convex rollers provide a smooth, long-lasting, quiet operation and are affixed to an adjustable stamped steel housing that slides into a stamped steel mounting bracket. Used on a 1-3/8 in thick door and 80 lb.
|
Fits doors 1-3/8 to 1-1/2 in thick. Pre-assembled for doors opening left to right. Plates are reversible for doors opening right to left. Overall size of 2-3/4 in H x 2-1/2 in D.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Fits doors 1-3/8 to 1-1/2 in thick. Pre-assembled for doors opening left to right. Plates are reversible for doors opening right to left. Overall size of 2-3/4 in H x 2-1/2 in D.
|
Fits doors 1-3/8 to 1-1/2 in thick. Pre-assembled for doors opening left to right. Plates are reversible for doors opening right to left. Overall size of 2-3/4 in H x 2-1/2 in D.
|
Heavy-duty hangers with 3 ball bearing equipped wheels for long, trouble free service - never needs lubrication. Height adjustable. 200 lb weight capacity. 1 x 3 in plate size.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
N 6770 is a solid brass pocket door pull with a polished brass finish. It fits doors that are 1-3/8 to 1-3/4 in thick. There is a hidden finger pull on the front edge of the pocket door pull. Fasteners included.
|
National Hardware Pocket Door Hardware Kit, Plastic/Steel, Includes: (1) Bumper, (2) Floor Brackets, (2) Guides, (2) Mounting Plates, (2) Wall Brackets, (2) Wheel/Bracket Assemblies and All Nails and Screws Necessary For Assembly
|
Tandem wheels; top mount steel hanger for pocket doors; 7/8 in round edge nylon wheel; for 1-3/8 in thick doors up to 75 lb each; fits on Cox. Includes 2 roller assemblies; 4 #8 x 1-1/4 in Phillips pan head sheet metal screws.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Sliding door pull in brass substrate in aged bronze.
|
Sliding door pull in brass substrate in satin nickel.
|
Sliding door pull in brass substrate in antique brass.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Thumbturn on inside and flat face on the outside. Door prep 2-1/8 in face bore 1 in edge bore. Door thickness adjustable for 1-3/8 to 1-3/4 in. Flat and beveled doors. Latch bolt fronts 1 x 2-1/4 in, round corner steel. Non-handed.
|
Our innovative round design fits a standard 2-1/8 in drilled door, allowing easy installation with a standard screwdriver.
|
N 7239 is a solid brass privacy lock and pull for a pocket door with a satin nickel finish. It fits doors that are 1-3/8 to 1-3/4 in thick. The thumb turn engages and disengages the latch. It is 2-3/4 in tall by 2-1/2 in deep and can be reversed from left handed to right handed.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
N 7161 is a solid brass pocket door privacy lock and flush edge pull in a Satin Chrome Finish. It fits doors that are 1-3/8 to 1-3/4 in thick. The thumb turn engages and disengages the latch. It is 2-3/4 in tall by 2-1/2 in deep and can be reversed from left handed to right handed.
|
Used on pre-drilled pocket doors. Latches but does not lock. Easy installation. Includes fasteners.
|
N 7238 is a solid brass pocket door pull with a satin nickel finish. It is 2-3/4 in tall and fits doors that are 1-3/8 to 1-3/4 in thick.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
N 6771 is a solid brass privacy lock and pull for a pocket door with an polished brass finish. It fits doors that are 1-3/8 to 1-3/4 in thick. It is 2-3/4 in tall and can be reversed from left handed to right handed.
|
Our innovative round design fits a standard 2-1/8 in drilled door, allowing easy installation with a standard screwdriver.
|
Thumbturn on inside and flat face on the outside. Door prep 2-1/8 in face bore 1 in edge bore. Door thickness adjustable for 1-3/8 to 1-3/4 in. Flat and beveled doors. Latch bolt fronts 1 x 2-1/4 in, round corner steel. Non-handed.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Thumbturn on inside and flat face on the outside. Door prep 2-1/8 in face bore 1 in edge bore. Door thickness adjustable for 1-3/8 to 1-3/4 in. Flat and beveled doors. Latch bolt fronts 1 x 2-1/4 in, round corner steel. Non-handed.
|
Used on pre-drilled pocket doors. Locks the pocket door. Easy installation. Includes fasteners.
|
Used on pre-drilled pocket doors. Locks the pocket door. Easy installation. Includes fasteners.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Fits doors from 1-1/4 in to 1-5/8 in thick. Includes flush pull on edge of door. Manufactured of solid brass for maximum corrosion resistance.
|
With Weiser? you can blend simplicity with elegance. Whether you're looking for traditional, transitional or contemporary style, our selection and finishes will make it easy to find the right accent for your home. Our innovative round design fits a standard 2-1/8' drilled door, allowing easy installation with a standard screwdriver. This passage pocket door lock is best used in interior hall and closet applications where no locking is required. The crisp, clean appearance of the satin nickel finish adds to the overall look of the product and brings a modern feel.
|
PD119P 3-wheel hanger kit. 2 pack kit with ball bearing wheels for repairs of existing installation. Hardware for one door weighing 200 lb. Ball bearing wheels for smooth & quiet rolling.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Door preparation 2-1/8 in face bore 1 in edge bore. Adjustable for 1-3/8 in to 1-3/4 in. Latch bolt for flat and beveled doors. Latch bolt fronts 1 x 2-1/4 in, round corner steel. Non-handed.
|
RENIN Pocket Door Hardware Kit, Maximum Weight per Door: 57 lb, Metal, Suitable for: 1-3/5 to 1-3/4 in Doors, Includes: (4) 1-1/2 in Pan Head Screws, (7) 5/8 in Pan Head Screws, (1) Bumper, (2) Door Hanger Plates, (2) Hanger Bolts, (2) Hangers and (1) Wrench
|
N 6773 is a solid brass privacy lock and pull for a pocket door with an polished chrome finish. It fits doors that are 1-3/8 to 1-3/4 in thick. It can be reversed from left handed to right handed.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
With Weiser? you can blend simplicity with elegance. Whether you're looking for traditional, transitional or contemporary style, our selection and finishes will make it easy to find the right accent for your home. Our innovative round design fits a standard 2-1/8' drilled door, allowing easy installation with a standard screwdriver. This privacy pocket door lock is best used in interior bed and bath applications where privacy is required. The crisp, clean appearance of the satin nickel finish adds to the overall look of the product and brings a modern feel.
|
The PD100 pocket door hardware & track kit is built for durability and long-time use. Comes with 3-wheel trolleys and the solid 72 in aluminum track can support doors up to 125 lb. Ideal for those who already have an existing frame and need hardware only.
|
National Hardware V1951 Privacy, Brass, Chrome, Suitable for: 1-3/8 in THK Doors
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
N 7274 is a satin nickel pocket door flush edge pull. It mounts onto the leading edge of a pocket door and has a pull that is pulled out from its flush position to pull the pocket door out of the wall. Afterwards, the pull retracts back into a flush position.
|
A fast, convenient method of finishing a pocket door installation. Just cut to length and install. No ripping of special thickness stock. Presanded so finishing is a snap.
|
Solid brass faceplate. (2-1/2 in L x 2-11/16 in W). Adjustable for 1-3/8 in or 1-3/4 in doors, without the need for special screws. Coined edges eliminate bowing of faceplate. Curved zinc die-cast finger pull. Inner working construction eliminates jamming of lock.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
National Hardware Pocket Door Hardware, Door Thickness: 3/4 to 1-3/4 in, Aluminum/Particle Board/Steel, Includes: (1) Header and Track Assembly, (4) Jamb Stiffeners, (2) Floor Brackets, (1) Door Guide Set, (2) Snap-in Door Plates, (2) Snap-in Hangers, (1) Bumper, (1) Wrench
|
The 1500 Series standard-duty pocket door frame is designed to carry heavy standard size doors (up to 125 lb each) in standard 2 x 4 timber or steel framed stud walls. The 1500 frame kit is packaged for easy transport and fast installation for either single door or converging door applications. The 1500 is a versatile frame and can be adapted for use in non-standard wall thicknesses, block masonry walls and can be cut down to accept any smaller size door size.
|
The PD3068 pocket door frame kit is built for durability and long-time use. The 3-wheel trolleys feature ball bearing wheels for smooth quiet rolling and the solid aluminum track can support doors up to 200 lb. Kit comes knock down in a box which transports easily and assembles quickly. Comes ready for door widths of 36 in but, can be cut down to accommodate doors as wide as 24 x 80 in high. Wood components constructed of pine and designed for wall structures of 2x4. Combine two kits together by using the converging door kit (Sold separately).
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The PD3080 pocket door frame kit is built for durability and long-time use. The 3-wheel trolleys feature ball bearing wheels for smooth quiet rolling and the solid aluminum track can support doors up to 200 lb. Kit comes knock down in a box which transports easily and assembles quickly. Comes ready for door widths of 36 in but, can be cut down to accommodate doors as wide as 24 x 96 in high. Wood components constructed of pine and designed for wall structures of 2x4. Combine two kits together by using the converging door kit (Sold separately).
|
The 1500HD Series pocket door frame is designed to carry heavy solid core doors weighing up to 200 lb Ball bearing hanger wheels provide feather-touch door operation making the 1500HD one of the smoothest rolling pocket door installations available. The 1500 is designed to be quickly installed into prepared 2 x 4 timber frame stud walls however, the 1500 can also be adapted for use in various wall thicknesses and with various wall materials and structures. The 1500 frame kit is packaged for easy transport and fast installation for either single or converging 2 door applications and all frame sizes can be cut down to accommodate custom size doors.
|
|
|
VIEW MAP & PHOTO GALLERY | CALL US: 406-466-3100