|
|
|
|
|
|
|
|
|
|
|
|
|
|
N 6658 is 7/8 in Dia anti-slam bumper that is installed onto the jamb with a screw. The bumper stands out 7/16 in from the surface it has been mounted to. It provides a protective anti-slam stop when closing bi-pass wardrobe doors.
|
RENIN Door Pull, Metal, Brass
|
Plated steel, universal design fits a 3/4 in Dia hole.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Plated steel, universal design fits a 3/4 in Dia hole.
|
N 6562 is a 3-Piece adjustable floor guide. Made of white nylon, the guides at each end can be adjusted inward to accommodate doors 3/4 to 1-3/8 in thick. Used by many closet door manufacturers. The guides extend 3/4 in from the floor. For taller guides see N 6760 or N 6761.
|
N 6559 is a set of handed white plastic guides that have a spring-loaded insert tip that fits bottom grooved tracks. They mount into the back bottom frame section of steel panel style doors & are held in place by a screw. Used on Glide-All door systems.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
N 6760 is a 3-Piece adjustable floor guide. Made of white nylon, the 1 in tall guides at each end can be adjusted inward to accommodate doors 7/8 to 1-3/8 in thick. Used by many closet door manufacturers.
|
N 6564 is a 3-Piece adjustable floor guide with adjustable slide sections. Made of white nylon, the 7/8 in tall guides can be adjusted to accommodate doors 3/4 to 1-3/8 in thick. Universal design used by many closet door manufacturers.
|
RENIN Adjustable Door Guide, Metal, Suitable for: 3/4 to 1-3/8 in Sliding Door Panels
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Held in place by 2 nails used by many wardrobe & door manufacturers. Includes 2 pull handles; 4 brass nails for installation. 7/16 in depth. Used by many wardrobe manufacturers.
|
N 6563 is a white nylon floor guide for 1-3/8 in thick doors. A universal design. At 1-1/8 in tall, it provides a taller than normal guide for most standard thickness closet doors.
|
Fits Cox wardrobe doors in top-hung side-mounting applications. Steel offset adjustable bracket with 1/4 in W round edge nylon wheel. For 3/4 to 1-3/8 in thick by-passing doors up to 50 lb. Includes 2 #8 x 3/4 in Phillips pan head screws.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Fits Cox wardrobe doors in top-hung side-mounting applications. Steel offset adjustable bracket with 1/4 in W round edge nylon wheel. For 3/4 to 1-3/8 in thick by-passing doors up to 50 lb. Includes 2 #8 x 3/4 in Phillips pan head screws.
|
N 6761 is a 3-Piece adjustable floor guide. Made of white nylon, the 1-1/4 in tall guides at each end can be adjusted inward to accommodate doors 3/4 to 1-3/8 in thick. Used by many closet door manufacturers.
|
Fits Cox wardrobe doors in top-hung side-mounting applications. Steel offset adjustable bracket with 1/4 in W round edge nylon wheel. For 3/4 to 1-3/8 in thick by-passing doors up to 50 lb. Includes 2 #8 x 3/4 in Phillips pan head screws.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Fits Acme wardrobe doors in top-hung side-mounting applications. Adjustable steel bracket with 1/4 in W round edge nylon wheel. For 3/4 to 1-3/8 in thick doors. Includes six #8 x 3/4 in Phillips pan head screws. N 7030 and N 7031 have nickel steel brackets.
|
Fits Cox wardrobe doors in top-hung side-mounting applications. Steel offset adjustable bracket with 1/4 in W round edge nylon wheel. For 3/4 to 1-3/8 in thick by-passing doors up to 50 lb. Includes 2 #8 x 3/4 in Phillips pan head screws.
|
Fits Acme wardrobe doors in top-hung side-mounting applications. Adjustable steel bracket with 1/4 in W round edge nylon wheel. For 3/4 to 1-3/8 in thick doors. Includes six #8 x 3/4 in Phillips pan head screws. N 7030 and N 7031 have nickel steel brackets.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
National Hardware Sliding Door Hanger, Adjustable, 60 lb Weight, Plastic/Steel, Suitable for: 3/4 to 1-3/8 in Bypass Door
|
Held in place by 2 nails used by many wardrobe & door manufacturers. Includes 2 pull handles; 4 brass nails for installation. 7/16 in depth. Used by many wardrobe manufacturers.
|
National Hardware Sliding Door Hanger, Adjustable, 60 lb Weight, Plastic/Steel, Suitable for: 3/4 to 1-3/8 in Thick Doors
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Designed as an adjustable, guide for by-passing doors from 3/4 to 1-3/8 in thick. Keeps door properly aligned. Needs cardboard shim for proper spacing of 2 side sections. Includes screw.
|
Held in place by 2 nails used by many wardrobe & door manufacturers. Includes 2 pull handles; 4 brass nails for installation. 7/16 in depth. Used by many wardrobe manufacturers.
|
N 6560 is a 2-Piece adjustable floor guide. Made of white nylon, the guides can be adjusted to accommodate doors 3/4 to 1-3/8 in thick by using the slots in the stamped steel floor base. Used by many closet door manufacturers. The guides extend 5/8 in from the floor.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
N 6661 is a bi-pass floor guide that can be used universally on most wardrobe doors systems. The nylon guides are adjustable to accommodate 3/4 to 1-3/8 in closet doors. The carpet riser shim plates can raise the guides from 1/8 to 5/8 in above the floor to accommodate the height of the carpet.
|
Fits wardrobe doors in top-hung side-mounting applications. Offset adjustable steel bracket with 1/4 in W round edge nylon ball bearing wheel. For 3/4 to 1-3/8 in thick doors. Includes 2 #6 x 5/8 in and 1 #4 x 3/4 in Phillips pan head screws.
|
Brass plated steel sliding door pull for pocket doors; fits a 7/8 x 2-1/2 in mortise. Contents 2 pulls, 4 nails or screws.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Top hung, side mount. Offset adjustable steel bracket. Round edge nylon wheels. Fits 3/4 to 1-3/8 in thick door, fits on Acme. Includes 2 roller assemblies, 6# 8 x 3/4 in Phillips pan head sheet metal screws.
|
Fits wardrobe doors in top-hung side-mounting applications. Offset adjustable steel bracket with 1/4 in W round edge nylon ball bearing wheel. For 3/4 to 1-3/8 in thick doors. Includes 2 #6 x 5/8 in and 1 #4 x 3/4 in Phillips pan head screws.
|
Top hung; side mount. Offset adjustable steel bracket. Round edge nylon wheels. Fits 3/4 to 1-3/8 in thick door; fits on Acme. Contents: 2 roller assemblies, 6 #8 x 3/4 in Phillips pan head sheet metal screws.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Held in place by 2 nails used by many wardrobe & door manufacturers. Includes 2 pull handles; 4 brass nails for installation. 7/16 in depth. Used by many wardrobe manufacturers.
|
RENIN Dual Offset Door Hanger, Offset Size: 7/16 in, Metal, Dimensions: 10 in L x 5 in W x 5-3/4 in H, Suitable for: 3/4 to 1-3/8 in Door Panels
|
RENIN Dual Offset Door Hanger, Metal, Dimensions: 10 in L x 5 in W x 5-3/4 in H, Suitable for: 3/4 to 1-3/8 in Door Panels
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Fits Cox wardrobe doors in top-hung side-mounting applications. Offset adjustable steel bracket with 1/4 in W round edge nylon wheel. For 3/4 to 1-3/8 in thick doors. Includes 3 #8 x 3/4 in Phillips pan head screws.
|
Fits Cox wardrobe doors in top-hung side-mounting applications. Offset adjustable steel bracket with 1/4 in W round edge nylon wheel. For 3/4 to 1-3/8 in thick doors. Includes 3 #8 x 3/4 in Phillips pan head screws.
|
Top hung; offset adjustable bracket. Round edge nylon wheel. Fits 3/4 to 1-3/8 in thick doors; fits on Harvey. Contents: 1 roller assembly, 4 #8 x 1-1/4 in Phillips pan head sheet metal screws.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Single wheel; adjustable steel bracket; round edge nylon wheel; designed for steel frame bi-passing doors. Fits on: Cox. Contents: 2 roller assemblies, non-handed.
|
Nylon wheels require no lubrication. For 3/4 to 1-3/8 in thick doors. Cam-action dial permits fingertip adjustments in aligning door to jamb.
|
Nylon wheels require no lubrication. For 3/4 to 1-3/8 in thick doors. Cam-action dial permits fingertip adjustments in aligning door to jamb.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Single wheel; adjustable steel bracket; also acts as a corner bracket for steel frame by-passing doors; fits on Acme. Contents: 2 roller assemblies, 1 left and 1 right.
|
Prime-Line Door Pull, 5/16 in D, 2-1/8 in Dia, Mortise Mounting, Brass, Satin Nickel, Suitable for: 2-1/8 in Dia Hole Sliding Closet Doors, Includes: Hardwares
|
N 6630 is a Paneled Mirror Door roller assembly with a concave nylon roller. Used on Monarch Mirror Doors "L" Series, the grooved ball bearing nylon roller provides a smooth ride as it slide back and forth. The flat nylon roller is 1-1/2 in Dia. Note that the adjusting screw is centered on the top of the housing and the tabs on either side will insert into slots on that side and will be held in place by the existing screws.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
RENIN Bottom Guide Connector, Metal, Dimensions: 10 in L x 5 in W x 5-3/4 in H
|
Fits wardrobe doors. Tandem, top mounting nylon wheels with adjustable steel bracket. Fits 3/4 to 1-3/4 in thick doors, fits on Acme.
|
RENIN Door Bottom Track, 72 in L, Powder-Coated, Bright White
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Plated steel, includes two brass nails for installation.
|
Plated steel, includes two brass nails for installation.
|
|
|
VIEW MAP & PHOTO GALLERY | CALL US: 406-466-3100
