|
|
|
|
|
|
|
|
|
|
|
|
|
|
Universal design, zinc plated steel. Mounts to back of lead doors to maintain tight closure in openings not entered from both sides. Includes set of 1-1/8 in H aligners and four No.8 x 3/4 in Phillips pan head sheet metal screws.
|
N 6672 is a nylon top mount bi-fold door pivot. Used by several manufacturers, the spring-loaded 3/8 in nylon pin inserts into the top pivot bracket above creating a pivot point for the bi-fold door.
|
N 6756 is a hardwood bi-fold door pull knob. It has a 1-3/4 in Dia knob and a 11/16 in Dia base. Used on solid wood bi-fold door panels, the large diameter knob is comfortable to use. It can be stained or painted to match. Fits up to a 1-3/8 in thick door.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
N 6700 is a spring loaded, 1/4 in Dia steel pivot in a 3/8 in plastic base. It mounts on the top edge of a bi-fold door that is 1 to 1-3/8 in thick.
|
N 6673 is a bottom mount pivot used by many bi-fold doors manufacturers. The 3/8 in Dia nylon base houses a grooved pivot tip that screws in or out for adjustment.
|
Stamped steel bracket mounts into top or bottom track, fits on Slimfold and others.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
National Hardware V391A Folding Door Aligner, Steel, Zinc
|
RENIN Bi-Fold Door Aligner, Steel, Zinc, Includes: Fasteners
|
6583 is a top mount bi-fold door pivot. Used on Cox doors, the spring-loaded 1/4 in steel pin inserts into the top pivot bracket above creating a pivot point for the bi-fold door.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Fits Acme 2900 Series bi-fold doors. Steel bracket mounts into top track. 1-15/16 in L x 3/4 in W overall.
|
Acme Door Track, 29-3/4 in L, Steel, Bright White
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
N 6539 is a 4 in long bi-fold door snugger that snaps into the center of the bi-fold door track. The guide pin (N 6545) is inserted between the two springs in the nylon snugger housing. As the door is closed, the snugger slides in the track and makes contact with the opposite set of doors. This applies pressure evenly between guide pins. This causes them to remain in the closed position until one of the sets is grabbed by the knob and pulled outward. Used on Acme bi-fold doors.
|
N 6705 is a spring loaded, 3/4 in square glide or guide in a 3/8 in plastic base. It mounts on the top edge of a bi-fold door that is 1 to 1-3/8 in thick. Used by Alliance Doors and many bi-fold door manufacturers.
|
N 6696 is a bottom mount pivot used by many bi-fold doors manufacturers. The 7/16 in Dia nylon base houses a grooved pivot tip that screws in or out for adjustment.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Nylon base; fits Cox doors. 1/4 in W nylon wheel with 7/16 in OD x 1-1/2 in H nylon base self-adjusts from 1-7/8 to 2-1/2 in in track for smooth guiding of lead door. For 1 to 1-3/8 in thick bi-fold doors up to 30 lb each.
|
N 6729 is a guide rod used in Benchmark bi-fold door systems. The 5/16 in Dia, 5-1/4 in long steel rod and is threaded on the bottom half with a hex nut and washer. There is a 3/8 in nylon cap on the end.
|
National Hardware Guide Roller, Bearing Type: Ball, Steel, Zinc, Suitable for: Folding Door Frames
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
RENIN Slide Guide, Plastic, White, Powder-Coated, Screw Mounting, Suitable for: BF103P Top Pivots and ACME Bi-Fold Track Doors
|
RENIN Door Bottom Pivot, Base Diameter: 7/16 in
|
N 6823 is a stamped steel top pivot bracket. It fits into the Acme 5/8 in wide track. The bracket is inserted into the track and as the screw is tightened, it forces the bracket against the lip running the length of both sides of the track. It is adjustable by moving it back or forth to the best position. It is used with the Acme top pivot N 6672.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
N 6703 is a spring loaded, 7/8 in Dia nylon roller guide in a 3/8 in plastic base. It mounts on the top edge of a bi-fold door that is 1 to 1-3/8 in thick. Commonly used by Kenna Frame as well as countless other bi-fold door manufacturers.
|
Replaces bottom pivot/jamb bracket pivot used on tap in type hardware.
|
Acme Top Pivot and Roller Guide, Base Diameter: 7/16 in
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
RENIN Jamb Bracket/Bottom Pivot, Metal, Zinc, Screw Mounting, Suitable for: 3/4 to 1-3/8 in Door Panels
|
Fits on Cox doors for horizontal adjustments. Adjustable stamped steel bracket and nylon bushing. 2-7/8 in L x 7/8 in D x 1-5/16 in H overall. For 1 to 1-3/8 in Thick folding doors up to 50 lb. each. Includes two #8 x 3/4 in Phillips pan head screws and one #8 x 1-1/4 in Phillips flat head screw.
|
N 6545 is a top mount bi-fold door pivot. Used on Acme and Cox doors, the spring-loaded 3/8 in pin inserts into the pivot bracket above creating a top pivot point for the bi-fold door.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Fits on Acme doors. Adjustable stamped steel bracket and self-lubricating nylon bushing. 2-15/16 in L x 15/16 in D x 1-3/16 in H overall. For 1 to 1-3/8 in Thick folding doors up to 50 lb. each. Includes two #8 x 3/4 in Phillips pan head screws and one #8 x 1-1/4 in Phillips flat head screw.
|
N 6702 is a top mount bi-fold door pivot. Used by several door manufacturers, the 19/32 in spring-loaded pivot pin inserts into the pivot bracket above creating a top pivot point for the bi-fold door.
|
Fits on Johnson Hardware doors. Steel bracket with nylon bushing insert to accept pivot pin. 3-1/16 in L x 1 in W overall. Includes two #8 x 1-1/4 in Phillips pan head screws.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Used by many door manufacturers. Adjustable stamped steel bracket. 2-15/16 in L x 1 in D x 1-1/4 in H overall. Bottom pivot with 7/16 in OD stem, nylon base and steel pin that has a 1/2 in OD tip with 3/8 in W groove. Includes bracket, bottom pivot and 3 installation screws.
|
N 6611 is a spring-loaded 3/4 in Dia nylon roller guide in a steel nail down base. The base is 3/8 in with 2 nail down tabs on either side. It mounts on the top edge of a bi-fold door that is 1 in to 1-3/8 in thick and up to 30 lb.
|
RENIN Bi-Fold Door Hinge, Non-Mortise, Screw Mounting, Metal, Zinc, Suitable for: 1 in Thick Door Panel
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
National Hardware V391UP Folding Door Upper Pivot, Steel, Zinc, Suitable for: 7/8 in Track Systems, Includes: (1) Pivot, (1) Guide
|
N 6706 is a bottom mount pivot used by many bi-fold door manufacturers. The 3/8 in Dia nylon base houses a 1/4 in pivot with a hex head nut for adjustment.
|
1/4 in W nylon wheel on spring-loaded steel shaft with plastic housing that tapers to 3/8 in OD to allow for hammering into drilled hole. Self-adjusts from 1-1/2 to 2 in H.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Acme Door Track, 59-3/4 in L, Steel, Bright White
|
Steel base; fits Acme and Cox doors. 1/4 in W nylon wheel with 7/16 in OD x 1-1/2 in H steel base self-adjusts from 1-7/8 to 2-1/2 in in track for smooth guiding of lead door. For 1 to 1-3/8 in thick bi-fold doors up to 30 lb each.
|
N 6704 is a spring loaded, 3/4 in Dia nylon roller guide in a 3/8 in plastic base. It mounts on the top edge of a bi-fold door that is 1 to 1-3/8 in thick. Used by many bi-fold door manufacturers.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
N 7263 is a combination set of the top pivot and top guide typically used on several wood bi-fold doors. They are both spring loaded steel shafts set a in 7/16 in Dia nylon housing. The 7/8 in horizontal roller on the guide provides a smooth guiding of the lead door. The top pivot has a 1/4 in Dia pin set in its nylon housing. To install, lightly tap them into the pre-drilled top mount holes.
|
Adjusts bi-fold doors up or down, left or right. Surface mount for easy installation. Manufactured with cold-rolled steel and nylon.
|
N 6701 is a Top mount bi-fold door pivot and guide. Used by Johnson Hardware and other door manufacturers, the spring loaded pivot pin inserts into the pivot bracket above creating a top pivot point for the bi-fold door or it serves as a guide for the end door as it slides back and forth in the track. See N 6844 for the Pivot Bracket.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
N 7266 is a combination set of the top pivot and top guide typically used on several wood bi-fold doors. They are both spring loaded steel shafts set a in 3/8 in Dia plastic housing. The 7/8 in horizontal roller on the guide provides a smooth guiding of the lead door. The top pivot has a 1/4 in Dia pin set in its plastic housing. To install, lightly tap them into the pre-drilled top mount holes.
|
N 6656 is a set of brass-plated bi-fold door hinges. They are the non-mortise style used by very many bi-fold door manufacturers. Made of stamped steel, the hinges have a cutout that allows for the non-mortise installed.
|
RENIN Door Track, 36 in L, Steel, Powder-Coated, Bright White
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
N 7263 is a combination set of the top pivot and top guide typically used on several wood bi-fold doors. They are both spring loaded steel shafts set a in 7/16 in Dia steel housing. The 7/8 in horizontal roller on the guide provides a smooth guiding of the lead door. The top pivot has a 1/4 in Dia pin set in its steel housing. To install, lightly tap them into the pre-drilled top mount holes.
|
3/8 in and 7/16 in post diameter. Replacement top guide kit fits Johnson Hardware, Acme, Alliance, Cox, National, Sterling, E-Z Roll.
|
N 6755 is a brass-plated bi-fold door pull knob. It is 1-3/4 in Dia and is used on hollow core or solid wood bi-fold door panels. Fits up to a 1-3/8 in thick door.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
N 6614 is a spring-loaded 7/8 in Dia nylon roller guide in a steel nail down base. The base is 3/8 in with 2 nail down tabs on either side. It mounts on the top edge of a bi-fold door that is 1 to 1-3/8 in thick and up to 30 lb.
|
N 6612 is a spring-loaded 1/4 in steel pivot pin in a steel nail down base. The base is 3/8 in with 2 nail down tabs on either side. It mounts on the top back edge of a bi-fold door.
|
National Hardware V530 Door Hinge, 25 lb Weight, Pin Type: Removable, Door Thickness: 1 in, Surface Mounting, Steel, Brass, Dimensions: 3 in W, Suitable for: 1 in Thick Bi-Fold Doors
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
RENIN Door Track, 48 in L, Steel, Powder-Coated, Bright White
|
N 7372 is a decorative satin nickel die-cast bi-fold door pull knob. It is 1-11/16 in Dia and is used wood or hollow core bi-fold door panels. The wide base prevents hollow door crush and the large diameter knob allows for easy gripping. Fasteners are included.
|
Use to repair pivot point of bi-fold doors.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Use to repair pivot point of bi-fold doors.
|
Repair kit is for 3/8 in Dia holes. Fits 7/8 in wide top tracks. Kit includes most parts needed to repair one 2 door set.
|
RENIN Door Hardware Kit, Includes: Bottom Pivot, Jamb Bracket, Slide Guide, Specially Sized Screws and Top Pivots
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
RENIN Track and Hardware Kit, Track Length: 24 in, Steel, Bright White, Zinc, Screw Mounting, Suitable for: 3/4 to 1-3/8 in Door Panels, Includes: (12) #4 x 1-1/2 in Flat Slot Screws, (6) #8 x 1-1/2 in Pan Phillips Screws, (3) #8 x 1-1/2 in Flat Phillips Screws, (2) #8 x 5/8 in Pan Phillips Screws, (2) 7/16 in Top Pivots, 1-7/16 in Star Pivot, Jamb Bracket, Washer, Snugger Guide, White Plastic Door Pull and Door Aligner Wrench
|
RENIN Track and Hardware Kit, Track Length: 36 in, Steel, Bright White, Zinc, Screw Mounting, Suitable for: 3/4 to 1-3/8 in Door Panels, Includes: (12) #4 x 1-1/2 in Flat Slot Screws, (6) #8 x 1-1/2 in Pan Phillips Screws, (3) #8 x 1-1/2 in Flat Phillips Screws, (3) Hinges, (2) #8 x 5/8 in Pan Phillips Screws, (2) 7/16 in Top Pivots, Snugger Guide, White Plastic Door Pull, Door Aligner Wrench, 7/16 in Star Pivot, Jamb Bracket and Washer
|
National Hardware Folding Door Hardware Set, Door Thickness: 7/8 to 1-3/8 in, Steel, White, Dimensions: 36 in L, Suitable for: Bi-Fold Doors
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
RENIN Track and Hardware Kit, Track Length: 48 in, Steel, Bright White, Zinc, Screw Mounting, Suitable for: 3/4 to 1-3/8 in Door Panels, Includes: (24) #4 x 1-1/2 in Flat Slot Screws, (6) #8 x 1-1/2 in Flat Phillips Screws, (6) Hinges, (4) #8 x 5/8 in Pan Phillips Screws, (4) 7/16 in Top Pivots, (2) Washers, (12) #8 x 1-1/2 in Pan Phillips Screws, (2) 7/16 in Star Pivots, (2) Jamb Brackets, (2) White Plastic Door Pulls, Snugger Guide and Door Aligner Wrench
|
N 7273 is a set of nickel-plated bi-fold door hinges. They are the non-mortise style used by very many bi-fold door manufacturers. Made of stamped steel, the hinges have a cutout that allows for the non-mortise installed.
|
National Hardware Folding Door Hardware Set, Door Thickness: 7/8 to 1-3/8 in, Steel, White, Dimensions: 48 in L, Surface Mounting, Suitable for: Bi-Fold Doors
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
National Hardware Folding Door Hardware Set, Door Thickness: 7/8 to 1-3/8 in, Steel, White, Dimensions: 60 in L, Surface Mounting, Suitable for: Bi-Fold Doors
|
National Hardware Folding Door Hardware Set, Door Thickness: 7/8 to 1-3/8 in, Steel, White, Dimensions: 72 in L, Surface Mounting, Suitable for: Bi-Fold Doors
|
The Via folding door offers value and durability in a solid vinyl panel door with flexible vinyl hinges. This maintenance-free door fits openings from 24 in to 36 in wide by 80 in high. It may be installed as a double door, using two single doors.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Via folding door offers value and durability in a solid vinyl panel door with flexible vinyl hinges. This maintenance-free door fits openings from 24 in to 36 in wide by 80 in high. It may be installed as a double door, using two single doors.
|
The Via folding door offers value and durability in a solid vinyl panel door with flexible vinyl hinges. This maintenance-free door fits openings from 24 in to 36 in wide by 80 in high. It may be installed as a double door, using two single doors.
|
The Via folding door offers value and durability in a solid vinyl panel door with flexible vinyl hinges. This maintenance-free door fits openings from 24 in to 36 in wide by 80 in high. It may be installed as a double door, using two single doors.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Durable and maintenance-free, Oakmont Doors are a ideal choice for any room. They are crafted of energy-efficient, double wall vinyl panels with flexible vinyl hinges. Finish coated with scratch-resistant, clear UV varnish, the doors fit openings from 24 in to 36 in wide by 80 in high and trim easily to any height. Vinyl panels may be removed for door openings less than 36 in wide. You can also install Oakmont as a double door, using two single doors.
|
The Encore folding door is an energy-efficient, double wall vinyl panel door with flexible vinyl hinges. Finishes are coated with scratch-resistant, clear UV varnish that resists fading.
|
The Encore folding door is an energy-efficient, double wall vinyl panel door with flexible vinyl hinges. Finishes are coated with scratch-resistant, clear UV varnish that resists fading.
|
|
|
VIEW MAP & PHOTO GALLERY | CALL US: 406-466-3100