Home > FASTENERS > CHAIN, CABLE, ROPE > CHAIN / ACCESSORIES > ANCHOR SHACKLES
Sort By:
Page of 1
Fehr Bros 1/4IN Anchor Shackle Midland Big Orange 081163/MC645G Anchor Shackle Baron 193LR-1/4" Screw Pin Anchor Shackle
Forged steel, hot dipped, galvanized. Open-throat design, wide bow, screw pin shackle requires no tools to assemble. Slip screwdriver blade or hand punch through pin/eye and tighten. Warning, Inspect regularly. Replace if worn, distorted or damaged. Ensure pin is fully engaged. Seize pin with wire. Do not exceed WLL [Work Load Limit]. Use only duty rated shackles, with embossed WLL, for overhead lifting. Meets requirements of Federal Specification RR-C-271D Amendment 1. Shackle pins are forged from alloy steel, heat treated and tempered to give greater strength. Galvanized per ASTM A153. Design factor 5:1. Baron Anchor Shackle, Working Load Limit: 0.5 ton, Pin Type: Screw, Pin Diameter: 5/16 in, Steel, Galvanized
SHACKLE ANCHOR SCRW PIN 3/16IN Midland Big Orange 081253/MC647G Anchor Shackle SHACKLE ANCH 3/16IN GALV
Baron Anchor Shackle, Working Load Limit: 0.3 ton, Trade Size: 3/16 in, Pin Type: Screw, Pin Diameter: 1/4 in, Steel, Hot-Dipped Galvanized Meets requirements of Federal Specification RR-C-271D Amendment 1. Shackle pins are forged from alloy steel, heat treated and tempered to give greater strength. Galvanized per ASTM A153. Design factor 5:1. Campbell Anchor Shackle, 1/3 ton Working Load, Industrial Grade, 3/16 in Trade, 0.87 in Inside Length, 0.63 in Inside Width, 0.37 in Width Between Eyes, Screw Pin, 1/4 in Pin Diameter, Carbon Steel, Hot-Dipped Galvanized
SHACKLE ANCH 1/4IN GALV       Fehr Bros 3/16 Anchor Shackle SHACKLE ANCHOR GALV 3/16IN
Campbell Anchor Shackle, Working Load Limit: 1/2 ton, Industrial Grade, Trade Size: 1/4 in, Inside Length: 1.12 in, Inside Width: 0.78 in, Width Between Eyes: 1/2 in, Pin Type: Screw, Pin Diameter: 0.31 in, Carbon Steel, Galvanized Forged steel, hot dipped, galvanized. Open-throat design, wide bow, screw pin shackle requires no tools to assemble. Slip screwdriver blade or hand punch through pin/eye and tighten. Warning, Inspect regularly. Replace if worn, distorted or damaged. Ensure pin is fully engaged. Seize pin with wire. Do not exceed WLL [Work Load Limit]. Use only duty rated shackles, with embossed WLL, for overhead lifting. National Hardware Anchor Shackle, Working Load Limit: 650 lb, Trade Size: 3/16 in, Inside Width: 11/16 in, Wire Diameter: 7/32 in, Width Between Eyes: 11/32 in, Pin Type: Screw, Pin Diameter: 1/4 in, Pin Material: Steel, Steel, Galvanized, Suitable for: Rope or Chain, Includes: Removable Screw Pin
Cambell T9600435 Anchor Shackle SHACKLE ANCH 5/16IN GALV      Cambell T9600535 Anchor Shackle
Warning, use shackles only as indicated. Shackles must be inspected for wear, distortion and damage before use. If the pin or bow is worn, distorted or damaged, discard the entire shackle and replace. Do not use round pin shackles in rigging applications. Screw pin shackles should not be used if there will be movement on the pin. Movement could cause the pin to unscrew and drop the load. Always stand clear of loads being lifted. Campbell Anchor Shackle, Working Load Limit: 3/4 ton, Industrial Grade, Trade Size: 5/16 in, Inside Length: 1.2 in, Inside Width: 0.83 in, Width Between Eyes: 0.54 in, Pin Type: Screw, Pin Diameter: 0.37 in, Carbon Steel, Galvanized Warning, use shackles only as indicated. Shackles must be inspected for wear, distortion and damage before use. If the pin or bow is worn, distorted or damaged, discard the entire shackle and replace. Do not use round pin shackles in rigging applications. Screw pin shackles should not be used if there will be movement on the pin. Movement could cause the pin to unscrew and drop the load. Always stand clear of loads being lifted.
Midland Big Orange 081293/MC648G Anchor Shackle SHACKLE ANCHOR SCREW PIN 3/8IN Cambell T9600635/T9640635 Anchor Shackle
Meets requirements of Federal Specification RR-C-271D Amendment 1. Shackle pins are forged from alloy steel, heat treated and tempered to give greater strength. Galvanized per ASTM A153. Design factor 5:1. Baron Anchor Shackle, Working Load Limit: 1 ton, Trade Size: 3/8 in, Pin Type: Screw, Pin Diameter: 7/16 in, Steel, Hot-Dipped Galvanized Campbell Anchor Shackle, Working Load Limit: 1000 lb, Trade Size: 3/8 in, Pin Type: Screw, Carbon Steel, Zinc
Fehr Bros 5/16 Anchor Shackle Midland Big Orange 081343/MC649G Anchor Shackle National Hardware N223-669 Anchor Shackle
Forged steel, hot dipped, galvanized. Open-throat design, wide bow, screw pin shackle requires no tools to assemble. Slip screwdriver blade or hand punch through pin/eye and tighten. Warning, Inspect regularly. Replace if worn, distorted or damaged. Ensure pin is fully engaged. Seize pin with wire. Do not exceed WLL [Work Load Limit]. Use only duty rated shackles, with embossed WLL, for overhead lifting. Meets requirements of Federal Specification RR-C-271D Amendment 1. Shackle pins are forged from alloy steel, heat treated and tempered to give greater strength. Galvanized per ASTM A153. Design factor 5:1. National Hardware 3250BC Anchor Shackle, Working Load Limit: 1000 lb, Pin Type: Screw, Galvanized Steel
Fehr Bros 3/8 Anchor Shackle SHACKLE ANCHOR SS 3/16IN      National Hardware N223-677 Anchor Shackle
Forged steel, hot dipped, galvanized. Open-throat design, wide bow, screw pin shackle requires no tools to assemble. Slip screwdriver blade or hand punch through pin/eye and tighten. Warning, Inspect regularly. Replace if worn, distorted or damaged. Ensure pin is fully engaged. Seize pin with wire. Do not exceed WLL [Work Load Limit]. Use only duty rated shackles, with embossed WLL, for overhead lifting. National Hardware Anchor Shackle, Working Load Limit: 650 lb, 316 Grade, Trade Size: 3/16 in, Inside Length: 15/16 in, Inside Width: 5/8 in, Wire Diameter: 3/16 in, Width Between Eyes: 11/32 in, Pin Type: Screw, Pin Diameter: 1/4 in, Pin Material: Stainless Steel, Stainless Steel, Suitable for: Rope or Chain National Hardware 3250BC Anchor Shackle, Working Load Limit: 1500 lb, Galvanized Steel
SHACKLE ANCHOR SCRW PIN 7/16IN SHACKLE SCRW PIN HT GALV 3/8IN Cambell T9600835/T9640835 Anchor Shackle
Baron Anchor Shackle, Working Load Limit: 1-1/2 ton, Trade Size: 7/16 in, Pin Type: Screw, Pin Diameter: 1/2 in, Steel, Hot-Dipped Galvanized Campbell Anchor Shackle, Working Load Limit: 2000 lb, Consumer Grade, Trade Size: 1/2 in, Pin Type: Screw, Pin Material: Carbon Steel, Carbon Steel, Zinc
SHACKLE ANCHOR SCREW PIN 1/2IN Midland Big Orange 081373/MC650G Anchor Shackle National Hardware 3250BC Anchor Shackle
Meets requirements of Federal Specification RR-C-271D Amendment 1. Shackle pins are forged from alloy steel, heat treated and tempered to give greater strength. Galvanized per ASTM A153. Design factor 5:1. National Hardware 3250BC Anchor Shackle, Working Load Limit: 2000 lb, Pin Type: Screw, Galvanized Steel
Fehr Bros 1/2 Anchor Shackle SHACKLE ANCHOR SS 1/4IN       SHACKLE ANCHOR SS 5/16IN
Forged steel, hot dipped, galvanized. Open-throat design, wide bow, screw pin shackle requires no tools to assemble. Slip screwdriver blade or hand punch through pin/eye and tighten. Warning, Inspect regularly. Replace if worn, distorted or damaged. Ensure pin is fully engaged. Seize pin with wire. Do not exceed WLL [Work Load Limit]. Use only duty rated shackles, with embossed WLL, for overhead lifting. National Hardware Anchor Shackle, Working Load Limit: 1100 lb, 316 Grade, Trade Size: 1/4 in, Inside Length: 1-1/32 in, Inside Width: 25/32 in, Wire Diameter: 1/4 in, Width Between Eyes: 1/2 in, Pin Type: Screw, Pin Diameter: 5/16 in, Pin Material: Stainless Steel, Stainless Steel, Suitable for: Rope or Chain, Includes: Removable Screw Pin National Hardware Anchor Shackle, Working Load Limit: 1650 lb, 316 Grade, Trade Size: 5/16 in, Inside Length: 1-3/16 in, Inside Width: 27/32 in, Wire Diameter: 9/32 in, Width Between Eyes: 9/16 in, Pin Type: Screw, Pin Diameter: 13/32 in, Pin Material: Stainless Steel, Stainless Steel, Suitable for: Rope or Chain
SHACKLE ANCHOR SCREW PIN 3/4IN SHACKLE D SS 1/4IN            National Hardware 3250BC Anchor Shackle
Baron Anchor Shackle, Working Load Limit: 4-3/4 ton, Trade Size: 3/4 in, Pin Type: Screw, Pin Diameter: 7/8 in, Steel, Galvanized National Hardware D-Shackle, Working Load Limit: 1000 lb, Trade Size: 1/4 in, Inside Length: 7/8 in, Inside Width: 15/32 in, Pin Hole Diameter: 5/16 in, Width Between Eyes: 15/32 in, 316 Grade, Stainless Steel, Smooth, 19/32 in W, 1-9/16 in H National Hardware 3250BC Anchor Shackle, Working Load Limit: 4000 lb, Pin Type: Screw, Galvanized Steel
SHACKLE ANCH 5/8IN GALV       SHACKLE D SS 5/16IN           Fehr Bros 5/8 Anchor Shackle
Campbell Anchor Shackle, Working Load Limit: 3-1/4 ton, Industrial Grade, Trade Size: 5/8 in, Inside Length: 2.44 in, Inside Width: 1.56 in, Width Between Eyes: 1.06 in, Pin Type: Screw, Pin Diameter: 3/4 in, Carbon Steel, Galvanized National Hardware D-Shackle, Working Load Limit: 1700 lb, Trade Size: 5/16 in, Inside Length: 1-3/32 in, Inside Width: 9/16 in, Pin Hole Diameter: 13/32 in, Width Between Eyes: 9/16 in, 316 Grade, Stainless Steel, Smooth, 3/4 in W, 1-31/32 in H Forged steel, hot dipped, galvanized. Open-throat design, wide bow, screw pin shackle requires no tools to assemble. Slip screwdriver blade or hand punch through pin/eye and tighten. Warning, Inspect regularly. Replace if worn, distorted or damaged. Ensure pin is fully engaged. Seize pin with wire. Do not exceed WLL [Work Load Limit]. Use only duty rated shackles, with embossed WLL, for overhead lifting.
SHACKLE ANCHOR SS 3/8IN       SHACKLE ANCHOR SCREW PIN 5/8IN SHACKLE-FORGED GALV 5/8IN
National Hardware Anchor Shackle, Working Load Limit: 2200 lb, 316 Grade, Trade Size: 3/8 in, Inside Length: 1-3/8 in, Inside Width: 1 in, Wire Diameter: 3/8 in, Width Between Eyes: 21/32 in, Pin Type: Screw, Pin Diameter: 15/32 in, Pin Material: Stainless Steel, Stainless Steel, Suitable for: Rope or Chain, Includes: Removable Screw Pin Baron Anchor Shackle, Working Load Limit: 3-1/4 ton, Trade Size: 5/8 in, Pin Type: Screw, Pin Diameter: 3/4 in, Steel, Hot-Dipped Galvanized Designed for use in marine, industrial and construction applications. Galvanized finish for excellent corrosion resistance. Meet federal specifications RR-C-271D, Type IV, Class 2. Manufactured from forged steel.
Midland Big Orange 081443/MC651G Anchor Shackle SHACKLE D SS 3/8IN            Fehr Bros 3/4 Anchor Shackle
Meets requirements of Federal Specification RR-C-271D Amendment 1. Shackle pins are forged from alloy steel, heat treated and tempered to give greater strength. Galvanized per ASTM A153. Design factor 5:1. National Hardware D-Shackle, Working Load Limit: 2000 lb, Trade Size: 3/8 in, Inside Length: 1-9/32 in, Inside Width: 11/16 in, Pin Hole Diameter: 15/32 in, Width Between Eyes: 11/16 in, 316 Grade, Stainless Steel, Smooth, 15/16 in W, 2-11/32 in H Fehr Anchor Shackle, Working Load Limit: 3.25 ton, Commercial Grade, Trade Size: 3/4 in, Pin Type: Screw, Pin Diameter: 7/8 in, Pin Material: 1045 Steel, Steel, Hot-Dipped Galvanized
ANCHOR SHACKLE GALV 3/4       SHACKLE D SS 1/2IN            SHACKLE SCRW PIN HT GALV 3/4IN
National Hardware Anchor Shackle, Working Load Limit: 10,000 lb, Trade Size: 3/4 in, Inside Width: 2 in, Width Between Eyes: 1-5/16 in, Pin Type: Removable Screw, Pin Diameter: 7/8 in, Pin Material: Steel, Steel, Galvanized National Hardware D-Shackle, Working Load Limit: 4000 lb, Trade Size: 1/2 in, Inside Length: 1-1/2 in, Inside Width: 25/32 in, Pin Hole Diameter: 5/8 in, Width Between Eyes: 25/32 in, 316 Grade, Stainless Steel, 1-3/16 in W, 2-29/32 in H, Includes: Removable Screw Pin
Midland Big Orange 081503/MC652G Anchor Shackle SHACKLE D SS 5/8IN            Fehr Bros 7/8 Anchor Shackle
Meets requirements of Federal Specification RR-C-271D Amendment 1. Shackle pins are forged from alloy steel, heat treated and tempered to give greater strength. Galvanized per ASTM A153. Design factor 5:1. National Hardware D-Shackle, Working Load Limit: 5000 lb, Trade Size: 5/8 in, Inside Length: 1-31/32 in, Inside Width: 1-1/16 in, Pin Hole Diameter: 23/32 in, Width Between Eyes: 1-1/16 in, 316 Grade, Stainless Steel, 1-17/32 in W, 3-21/32 in H, Includes: Removable Screw Pin Forged steel, hot dipped, galvanized. Open-throat design, wide bow, screw pin shackle requires no tools to assemble. Slip screwdriver blade or hand punch through pin/eye and tighten. Warning, Inspect regularly. Replace if worn, distorted or damaged. Ensure pin is fully engaged. Seize pin with wire. Do not exceed WLL [Work Load Limit]. Use only duty rated shackles, with embossed WLL, for overhead lifting.
Midland Big Orange 081543/MC653G Anchor Shackle SHACKLE SCRW PIN HT GALV 7/8IN Fehr Bros 1 Anchor Shackle
Meets requirements of Federal Specification RR-C-271D Amendment 1. Shackle pins are forged from alloy steel, heat treated and tempered to give greater strength. Galvanized per ASTM A153. Design factor 5:1. Forged steel, hot dipped, galvanized. Open-throat design, wide bow, screw pin shackle requires no tools to assemble. Slip screwdriver blade or hand punch through pin/eye and tighten. Warning, Inspect regularly. Replace if worn, distorted or damaged. Ensure pin is fully engaged. Seize pin with wire. Do not exceed WLL [Work Load Limit]. Use only duty rated shackles, with embossed WLL, for overhead lifting.
BOW SHACKLE HD GRAY 3/4X3/4IN Midland Big Orange 081593/MC654G Anchor Shackle Midland Big Orange 081613/MC655G Anchor Shackle
Heavy-duty bow shackle is recommended for all winches. The bow shackle consists of a threaded removable pin and an "O" shaped loop at the top to take loads from many different directions. The isolator prevents distracting rattling sounds and marring to bumper. Meets requirements of Federal Specification RR-C-271D Amendment 1. Shackle pins are forged from alloy steel, heat treated and tempered to give greater strength. Galvanized per ASTM A153. Design factor 5:1. Meets requirements of Federal Specification RR-C-271D Amendment 1. Shackle pins are forged from alloy steel, heat treated and tempered to give greater strength. Galvanized per ASTM A153. Design factor 5:1.