|
|
|
|
|
|
|
|
|
|
|
|
|
|
The lead anchor is fast and easy to install. It is corrosion-resistant and has a strong holding power. It is internally threaded and it installs flush to surface. It can be used with wood or metal screws, which can be removed and reinstalled as needed.
|
The lead anchor is fast and easy to install. It is corrosion-resistant and has a strong holding power. It is internally threaded and it installs flush to surface. It can be used with wood or metal screws, which can be removed and reinstalled as needed.
|
Can be used in all types of masonry. Corrosion resistant. It is internally threaded and installs flush to surface.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Can be used in all types of masonry. Corrosion resistant. It is internally threaded and installs flush to surface.
|
Corrosion resistant. It is internally threaded and it installs flush to surface.
|
Corrosion resistant. It is internally threaded and it installs flush to surface.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Pre-assembled, all-purpose medium duty anchor. One-step installation. Corrosion resistant. A masonry drill bit is included in all "R" packs of 4 pieces.
|
The Parawedge? anchor stud is cold formed and consists of a threaded section with standard coarse bolt threads at one end and a parabolic shaped taper mandrel neck at the opposite end for a smoother expansion. It has a 360 deg clip for more contact, a torque controlled expansion and can be installed into a bottomless hole.
|
The Parawedge? anchor stud is cold formed and consists of a threaded section with standard coarse bolt threads at one end and a parabolic shaped taper mandrel neck at the opposite end for a smoother expansion. It has a 360 deg clip for more contact, a torque controlled expansion and can be installed into a bottomless hole.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Parawedge? anchor stud is cold formed and consists of a threaded section with standard coarse bolt threads at one end and a parabolic shaped taper mandrel neck at the opposite end for a smoother expansion. It has a 360 deg clip for more contact, a torque controlled expansion and can be installed into a bottomless hole.
|
Pre-assembled, all-purpose medium duty anchor. One-step installation. Corrosion resistant. A masonry drill bit is included in all "R" packs of 4 pieces.
|
Pre-assembled, all-purpose medium duty anchor. One-step installation. Corrosion resistant. A masonry drill bit is included in all "R" packs of 4 pieces.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Code listed for cracked and uncracked concrete and masonry applications, the Strong-Bolt 2 wedge-type expansion anchor is an optimal choice for high-performance even in seismic and high-wind conditions. Dual undercutting embossments on each clip segment enable secondary expansion should a crack form and intersect the anchor location; this feature significantly increases the ability of Strong-Bolt 2 to carry load if the hole expands.
|
TruBolt wedge anchors offer maximum strength and ultimate flexibility making them the PRO choice for heavy-duty anchoring. This wedge anchor features a high-strength body that is built to resist tension and shear loads and it is code approved for use in uncracked concrete. For additional application versatility, TruBolt wedge anchors are fully threaded to accommodate a greater range of fixture thicknesses. The wedge anchor's stainless steel clip provides extended corrosion resistance to ensure the long-term integrity of connections.
|
Code listed for cracked and uncracked concrete and masonry applications, the Strong-Bolt 2 wedge-type expansion anchor is an optimal choice for high-performance even in seismic and high-wind conditions. Dual undercutting embossments on each clip segment enable secondary expansion should a crack form and intersect the anchor location; this feature significantly increases the ability of Strong-Bolt 2 to carry load if the hole expands.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Can be removed and reinstalled. Torque controlled expansion. Made of grade 5 steel, bolt increases the shear load by 30%. A masonry drill bit is included in all packs.
|
The Parasleeve? is a one-step installation anchor that is easy and quick to install. It is a pre-assembled, all-purpose medium-duty anchor, that is offered in six head styles. More than 34 sizes are available, ranging from 1/4 x 5/8 in to 3/4 x 6-1/4 in.
|
Can be removed and reinstalled. Torque controlled expansion. Made of grade 5 steel, bolt increases the shear load by 30%. A masonry drill bit is included in all packs.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Parasleeve? is a one-step installation anchor that is easy and quick to install. It is a pre-assembled, all-purpose medium-duty anchor, that is offered in six head styles. More than 34 sizes are available, ranging from 1/4 x 5/8 in to 3/4 x 6-1/4 in.
|
Can be used in all types of masonry. Corrosion resistant. It is internally threaded and installs flush to surface.
|
Can be removed and reinstalled. Torque controlled expansion. Made of grade 5 steel, bolt increases the shear load by 30%. A masonry drill bit is included in all packs.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Can be used in all types of masonry. Corrosion resistant. It is internally threaded and installs flush to surface.
|
The Zamac Nailin? is a nail drive anchor which has a body formed from Zamac alloy. The anchor can be used in concrete, block, brick or stone. A corrosion-resistant Zamac alloy is used to form the anchor body with either a mushroom or flat head. The anchor can be used for light-duty, tamper-proof applications.
|
The Zamac Nailin? is a nail drive anchor which has a body formed from Zamac alloy. The anchor can be used in concrete, block, brick or stone. A corrosion-resistant Zamac alloy is used to form the anchor body with either a mushroom or flat head. The anchor can be used for light-duty, tamper-proof applications.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Code listed for cracked and uncracked concrete and masonry applications, the Strong-Bolt 2 wedge-type expansion anchor is an optimal choice for high-performance even in seismic and high-wind conditions. Dual undercutting embossments on each clip segment enable secondary expansion should a crack form and intersect the anchor location; this feature significantly increases the ability of Strong-Bolt 2 to carry load if the hole expands.
|
Code listed for cracked and uncracked concrete and masonry applications, the Strong-Bolt 2 wedge-type expansion anchor is an optimal choice for high-performance even in seismic and high-wind conditions. Dual undercutting embossments on each clip segment enable secondary expansion should a crack form and intersect the anchor location; this feature significantly increases the ability of Strong-Bolt 2 to carry load if the hole expands.
|
Code listed for cracked and uncracked concrete and masonry applications, the Strong-Bolt 2 wedge-type expansion anchor is an optimal choice for high-performance even in seismic and high-wind conditions. Dual undercutting embossments on each clip segment enable secondary expansion should a crack form and intersect the anchor location; this feature significantly increases the ability of Strong-Bolt 2 to carry load if the hole expands.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Parawedge? anchor stud is cold formed and consists of a threaded section with standard coarse bolt threads at one end and a parabolic shaped taper mandrel neck at the opposite end for a smoother expansion. It has a 360 deg clip for more contact, a torque controlled expansion and can be installed into a bottomless hole.
|
Code listed for cracked and uncracked concrete and masonry applications, the Strong-Bolt 2 wedge-type expansion anchor is an optimal choice for high-performance even in seismic and high-wind conditions. Dual undercutting embossments on each clip segment enable secondary expansion should a crack form and intersect the anchor location; this feature significantly increases the ability of Strong-Bolt 2 to carry load if the hole expands.
|
For fastening applications in concrete, block and brick. For brackets, drywall track, gutters and down spouts, electrical boxes.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For fastening applications in solid concrete. Contractor-grade anchors. Internally threaded. For overhead applications, transformers and meters, ceiling fans, electrical light fixtures.
|
For fastening applications in concrete, block and brick. For brackets, drywall track, gutters and down spouts, electrical boxes.
|
Code listed for cracked and uncracked concrete and masonry applications, the Strong-Bolt 2 wedge-type expansion anchor is an optimal choice for high-performance even in seismic and high-wind conditions. Dual undercutting embossments on each clip segment enable secondary expansion should a crack form and intersect the anchor location; this feature significantly increases the ability of Strong-Bolt 2 to carry load if the hole expands.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Code listed for cracked and uncracked concrete and masonry applications, the Strong-Bolt 2 wedge-type expansion anchor is an optimal choice for high-performance even in seismic and high-wind conditions. Dual undercutting embossments on each clip segment enable secondary expansion should a crack form and intersect the anchor location; this feature significantly increases the ability of Strong-Bolt 2 to carry load if the hole expands.
|
TruBolt wedge anchors offer maximum strength and ultimate flexibility making them the PRO choice for heavy-duty anchoring. This wedge anchor features a high-strength body that is built to resist tension and shear loads and it is code approved for use in uncracked concrete. For additional application versatility, TruBolt wedge anchors are fully threaded to accommodate a greater range of fixture thicknesses. The wedge anchor's stainless steel clip provides extended corrosion resistance to ensure the long-term integrity of connections.
|
Code listed for cracked and uncracked concrete and masonry applications, the Strong-Bolt 2 wedge-type expansion anchor is an optimal choice for high-performance even in seismic and high-wind conditions. Dual undercutting embossments on each clip segment enable secondary expansion should a crack form and intersect the anchor location; this feature significantly increases the ability of Strong-Bolt 2 to carry load if the hole expands.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Power-Stud? Plus SD1 anchor is a fully threaded, torque-controlled, wedge expansion anchor which is designed for consistent performance in cracked and uncracked concrete. Suitable base materials include normal weight concrete, sand lightweight concrete, concrete over steel deck and grouted concrete masonry. The anchor is manufactured with a zinc-plated carbon steel body and expansion clip for premium performance. Nut and washer are included.
|
The lag screw shield is a corrosion-resistant masonry anchor with the best expansion. It is internally threaded for inserting the lag bolt and it installs flush to the surface.
|
The Parasleeve? is a one-step installation anchor that is easy and quick to install. It is a pre-assembled, all-purpose medium-duty anchor, that is offered in six head styles. More than 34 sizes are available, ranging from 1/4 x 5/8 in to 3/4 x 6-1/4 in.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Code listed for cracked and uncracked concrete and masonry applications, the Strong-Bolt 2 wedge-type expansion anchor is an optimal choice for high-performance even in seismic and high-wind conditions. Dual undercutting embossments on each clip segment enable secondary expansion should a crack form and intersect the anchor location; this feature significantly increases the ability of Strong-Bolt 2 to carry load if the hole expands.
|
The drop-in anchor is a two-step installation anchor that expands using a setting tool. It has a female internal thread that accepts standard UNC threaded rods from 1/4 to 3/4 in and it installs flush. The drop-in anchor is made of sturdy steel and requires an expansion tool for its installation.
|
TruBolt wedge anchors offer maximum strength and ultimate flexibility making them the PRO choice for heavy-duty anchoring. This wedge anchor features a high-strength body that is built to resist tension and shear loads and it is code approved for use in uncracked concrete. For additional application versatility, TruBolt wedge anchors are fully threaded to accommodate a greater range of fixture thicknesses. The wedge anchor's stainless steel clip provides extended corrosion resistance to ensure the long-term integrity of connections.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
TruBolt wedge anchors offer maximum strength and ultimate flexibility making them the PRO choice for heavy-duty anchoring. This wedge anchor features a high-strength body that is built to resist tension and shear loads and it is code approved for use in uncracked concrete. For additional application versatility, TruBolt wedge anchors are fully threaded to accommodate a greater range of fixture thicknesses. The wedge anchor's stainless steel clip provides extended corrosion resistance to ensure the long-term integrity of connections.
|
Code listed for cracked and uncracked concrete and masonry applications, the Strong-Bolt 2 wedge-type expansion anchor is an optimal choice for high-performance even in seismic and high-wind conditions. Dual undercutting embossments on each clip segment enable secondary expansion should a crack form and intersect the anchor location; this feature significantly increases the ability of Strong-Bolt 2 to carry load if the hole expands.
|
The Power-Stud? Plus SD1 anchor is a fully threaded, torque-controlled, wedge expansion anchor which is designed for consistent performance in cracked and uncracked concrete. Suitable base materials include normal weight concrete, sand lightweight concrete, concrete over steel deck and grouted concrete masonry. The anchor is manufactured with a zinc-plated carbon steel body and expansion clip for premium performance. Nut and washer are included.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For fastening applications in solid concrete. Contractor-grade anchors. Internally threaded. For overhead applications, transformers and meters, ceiling fans, electrical light fixtures.
|
The Power-Stud? Plus SD1 anchor is a fully threaded, torque-controlled, wedge expansion anchor which is designed for consistent performance in cracked and uncracked concrete. Suitable base materials include normal weight concrete, sand lightweight concrete, concrete over steel deck and grouted concrete masonry. The anchor is manufactured with a zinc-plated carbon steel body and expansion clip for premium performance. Nut and washer are included.
|
Red Head Wedge Anchor, 1/2 in Dia, 5-1/2 in L, Head Type: Hex Nut, Steel, Hot-Dipped Galvanized, Silver
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
TruBolt? wedge anchors offer maximum strength and ultimate flexibility making them the PRO choice for heavy-duty anchoring. This wedge anchor features a high-strength body that is built to resist tension and shear loads and it is code approved for use in uncracked concrete per ICC-ES ESR-2251. Not only is TruBolt? code recognized, but this wedge anchor offers a full line of diameter options and a variety of lengths. For additional application versatility, TruBolt? wedge anchors are fully threaded to accommodate a greater range of fixture thicknesses. The wedge anchor's stainless steel clip provides extended corrosion resistance to ensure the long term integrity of connections.
|
Code listed for cracked and uncracked concrete and masonry applications, the Strong-Bolt 2 wedge-type expansion anchor is an optimal choice for high-performance even in seismic and high-wind conditions. Dual undercutting embossments on each clip segment enable secondary expansion should a crack form and intersect the anchor location; this feature significantly increases the ability of Strong-Bolt 2 to carry load if the hole expands.
|
TruBolt wedge anchors offer maximum strength and ultimate flexibility making them the PRO choice for heavy-duty anchoring. This wedge anchor features a high-strength body that is built to resist tension and shear loads and it is code approved for use in uncracked concrete. For additional application versatility, TruBolt wedge anchors are fully threaded to accommodate a greater range of fixture thicknesses. The wedge anchor's stainless steel clip provides extended corrosion resistance to ensure the long-term integrity of connections.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Code listed for cracked and uncracked concrete and masonry applications, the Strong-Bolt 2 wedge-type expansion anchor is an optimal choice for high-performance even in seismic and high-wind conditions. Dual undercutting embossments on each clip segment enable secondary expansion should a crack form and intersect the anchor location; this feature significantly increases the ability of Strong-Bolt 2 to carry load if the hole expands.
|
Code listed for cracked and uncracked concrete and masonry applications, the Strong-Bolt 2 wedge-type expansion anchor is an optimal choice for high-performance even in seismic and high-wind conditions. Dual undercutting embossments on each clip segment enable secondary expansion should a crack form and intersect the anchor location; this feature significantly increases the ability of Strong-Bolt 2 to carry load if the hole expands.
|
TruBolt? wedge anchors offer maximum strength and ultimate flexibility making them the PRO choice for heavy-duty anchoring. This wedge anchor features a high-strength body that is built to resist tension and shear loads and it is code approved for use in uncracked concrete per ICC-ES ESR-2251. Not only is TruBolt? code recognized, but this wedge anchor offers a full line of diameter options and a variety of lengths. For additional application versatility, TruBolt? wedge anchors are fully threaded to accommodate a greater range of fixture thicknesses. The wedge anchor's stainless steel clip provides extended corrosion resistance to ensure the long term integrity of connections.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Parasleeve? is a one-step installation anchor that is easy and quick to install. It is a pre-assembled, all-purpose medium-duty anchor, that is offered in six head styles. More than 34 sizes are available, ranging from 1/4 x 5/8 in to 3/4 x 6-1/4 in.
|
The Power-Stud? Plus SD1 anchor is a fully threaded, torque-controlled, wedge expansion anchor which is designed for consistent performance in cracked and uncracked concrete. Suitable base materials include normal weight concrete, sand lightweight concrete, concrete over steel deck and grouted concrete masonry. The anchor is manufactured with a zinc-plated carbon steel body and expansion clip for premium performance. Nut and washer are included.
|
The Spike? is a one-piece, vibration-resistant anchor for use in concrete block or stone. The Spike? anchor is formed with an "s" shaped configuration at the working end of the anchor to create an expansion mechanism. Since the anchor is pre-formed, there is no secondary tightening operation required which greatly reduces the overall cost of an anchor installation.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Power-Stud? Plus SD1 anchor is a fully threaded, torque-controlled, wedge expansion anchor which is designed for consistent performance in cracked and uncracked concrete. Suitable base materials include normal weight concrete, sand lightweight concrete, concrete over steel deck and grouted concrete masonry. The anchor is manufactured with a zinc-plated carbon steel body and expansion clip for premium performance. Nut and washer are included.
|
The Power-Stud? Plus SD1 anchor is a fully threaded, torque-controlled, wedge expansion anchor which is designed for consistent performance in cracked and uncracked concrete. Suitable base materials include normal weight concrete, sand lightweight concrete, concrete over steel deck and grouted concrete masonry. The anchor is manufactured with a zinc-plated carbon steel body and expansion clip for premium performance. Nut and washer are included.
|
Midwest Fastener Concrete Wedge Anchor, 3/8 in Dia, 2-3/4 in L, Zinc
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Parawedge? anchor stud is cold formed and consists of a threaded section with standard coarse bolt threads at one end and a parabolic mandrel at the opposite end for a smoother expansion. It has a 360 deg one-piece clip that functions as a two-piece clip for more contact, a torque controlled expansion and can be installed into a bottomless hole.
|
Code listed for cracked and uncracked concrete and masonry applications, the Strong-Bolt 2 wedge-type expansion anchor is an optimal choice for high-performance even in seismic and high-wind conditions. Dual undercutting embossments on each clip segment enable secondary expansion should a crack form and intersect the anchor location; this feature significantly increases the ability of Strong-Bolt 2 to carry load if the hole expands.
|
The Parawedge? anchor stud is cold formed and consists of a threaded section with standard coarse bolt threads at one end and a parabolic mandrel at the opposite end for a smoother expansion. It has a 360 deg one-piece clip that functions as a two-piece clip for more contact, a torque controlled expansion and can be installed into a bottomless hole.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The lead anchor is fast and easy to install. It is corrosion-resistant and has a strong holding power. It is internally threaded and it installs flush to surface. It can be used with wood or metal screws, which can be removed and reinstalled as needed.
|
The Power-Stud? Plus SD1 anchor is a fully threaded, torque-controlled, wedge expansion anchor which is designed for consistent performance in cracked and uncracked concrete. Suitable base materials include normal weight concrete, sand lightweight concrete, concrete over steel deck and grouted concrete masonry. The anchor is manufactured with a zinc-plated carbon steel body and expansion clip for premium performance. Nut and washer are included.
|
Midwest Fastener Concrete Wedge Anchor, 5/8 in Dia, 6 in L, Zinc, Zinc
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Parawedge? anchor stud is cold formed and consists of a threaded section with standard coarse bolt threads at one end and a parabolic mandrel at the opposite end for a smoother expansion. It has a 360 deg one-piece clip that functions as a two-piece clip for more contact, a torque controlled expansion and can be installed into a bottomless hole.
|
Code listed for cracked and uncracked concrete and masonry applications, the Strong-Bolt 2 wedge-type expansion anchor is an optimal choice for high-performance even in seismic and high-wind conditions. Dual undercutting embossments on each clip segment enable secondary expansion should a crack form and intersect the anchor location; this feature significantly increases the ability of Strong-Bolt 2 to carry load if the hole expands.
|
The Spike is a, one-piece, vibration-resistant anchor for use in concrete block or stone. Several head styles, including tamperproof versions and anchor materials are available. The Spike anchor is formed with an "s" shaped configuration at the working end of the anchor to create an expansion mechanism. Since the anchor is pre-formed, there is no secondary tightening operation required which greatly reduces the overall cost of an anchor installation.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Parawedge? anchor stud is cold formed and consists of a threaded section with standard coarse bolt threads at one end and a parabolic mandrel at the opposite end for a smoother expansion. It has a 360 deg one-piece clip that functions as a two-piece clip for more contact, a torque controlled expansion and can be installed into a bottomless hole.
|
The drop-in anchor is a two-step installation anchor that expands using a setting tool. It has a female internal thread that accepts standard UNC threaded rods from 1/4 to 3/4 in and it installs flush. The drop-in anchor is made of sturdy steel and requires an expansion tool for its installation.
|
The Parawedge? anchor stud is cold formed and consists of a threaded section with standard coarse bolt threads at one end and a parabolic mandrel at the opposite end for a smoother expansion. It has a 360 deg one-piece clip that functions as a two-piece clip for more contact, a torque controlled expansion and can be installed into a bottomless hole.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Code listed for cracked and uncracked concrete and masonry applications, the Strong-Bolt 2 wedge-type expansion anchor is an optimal choice for high-performance even in seismic and high-wind conditions. Dual undercutting embossments on each clip segment enable secondary expansion should a crack form and intersect the anchor location; this feature significantly increases the ability of Strong-Bolt 2 to carry load if the hole expands.
|
Midwest Fastener Concrete Wedge Anchor, 1/2 in Dia, 2-3/4 in L, Zinc, Zinc
|
The Parawedge? anchor stud is cold formed and consists of a threaded section with standard coarse bolt threads at one end and a parabolic mandrel at the opposite end for a smoother expansion. It has a 360 deg one-piece clip that functions as a two-piece clip for more contact, a torque controlled expansion and can be installed into a bottomless hole.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Code listed for cracked and uncracked concrete and masonry applications, the Strong-Bolt 2 wedge-type expansion anchor is an optimal choice for high-performance even in seismic and high-wind conditions. Dual undercutting embossments on each clip segment enable secondary expansion should a crack form and intersect the anchor location; this feature significantly increases the ability of Strong-Bolt 2 to carry load if the hole expands.
|
The Power-Stud? Plus SD1 anchor is a fully threaded, torque-controlled, wedge expansion anchor which is designed for consistent performance in cracked and uncracked concrete. Suitable base materials include normal weight concrete, sand lightweight concrete, concrete over steel deck and grouted concrete masonry. The anchor is manufactured with a zinc-plated carbon steel body and expansion clip for premium performance. Nut and washer are included.
|
Midwest Fastener Concrete Wedge Anchor, 1/2 in Dia, 3-3/4 in L, Zinc, Zinc
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Power-Stud? Plus SD1 anchor is a fully threaded, torque-controlled, wedge expansion anchor which is designed for consistent performance in cracked and uncracked concrete. Suitable base materials include normal weight concrete, sand lightweight concrete, concrete over steel deck and grouted concrete masonry. The anchor is manufactured with a zinc-plated carbon steel body and expansion clip for premium performance. Nut and washer are included.
|
The Parawedge? anchor stud is cold formed and consists of a threaded section with standard coarse bolt threads at one end and a parabolic mandrel at the opposite end for a smoother expansion. It has a 360 deg one-piece clip that functions as a two-piece clip for more contact, a torque controlled expansion and can be installed into a bottomless hole.
|
The Parawedge? anchor stud is cold formed and consists of a threaded section with standard coarse bolt threads at one end and a parabolic mandrel at the opposite end for a smoother expansion. It has a 360 deg one-piece clip that functions as a two-piece clip for more contact, a torque controlled expansion and can be installed into a bottomless hole.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Parawedge? anchor stud is cold formed and consists of a threaded section with standard coarse bolt threads at one end and a parabolic mandrel at the opposite end for a smoother expansion. It has a 360 deg one-piece clip that functions as a two-piece clip for more contact, a torque controlled expansion and can be installed into a bottomless hole.
|
The Parawedge? anchor stud is cold formed and consists of a threaded section with standard coarse bolt threads at one end and a parabolic mandrel at the opposite end for a smoother expansion. It has a 360 deg one-piece clip that functions as a two-piece clip for more contact, a torque controlled expansion and can be installed into a bottomless hole.
|
The Parawedge? anchor stud is cold formed and consists of a threaded section with standard coarse bolt threads at one end and a parabolic mandrel at the opposite end for a smoother expansion. It has a 360 deg one-piece clip that functions as a two-piece clip for more contact, a torque controlled expansion and can be installed into a bottomless hole.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Parawedge? anchor stud is cold formed and consists of a threaded section with standard coarse bolt threads at one end and a parabolic mandrel at the opposite end for a smoother expansion. It has a 360 deg one-piece clip that functions as a two-piece clip for more contact, a torque controlled expansion and can be installed into a bottomless hole.
|
Code listed for cracked and uncracked concrete and masonry applications, the Strong-Bolt 2 wedge-type expansion anchor is an optimal choice for high-performance even in seismic and high-wind conditions. Dual undercutting embossments on each clip segment enable secondary expansion should a crack form and intersect the anchor location; this feature significantly increases the ability of Strong-Bolt 2 to carry load if the hole expands.
|
Midwest Fastener Concrete Wedge Anchor, 3/8 in Dia, 3-3/4 in L, Zinc
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Parawedge? anchor stud is cold formed and consists of a threaded section with standard coarse bolt threads at one end and a parabolic mandrel at the opposite end for a smoother expansion. It has a 360 deg one-piece clip that functions as a two-piece clip for more contact, a torque controlled expansion and can be installed into a bottomless hole.
|
Code listed for cracked and uncracked concrete and masonry applications, the Strong-Bolt 2 wedge-type expansion anchor is an optimal choice for high-performance even in seismic and high-wind conditions. Dual undercutting embossments on each clip segment enable secondary expansion should a crack form and intersect the anchor location; this feature significantly increases the ability of Strong-Bolt 2 to carry load if the hole expands.
|
The Parawedge? anchor stud is cold formed and consists of a threaded section with standard coarse bolt threads at one end and a parabolic mandrel at the opposite end for a smoother expansion. It has a 360 deg one-piece clip that functions as a two-piece clip for more contact, a torque controlled expansion and can be installed into a bottomless hole.
|
|
|
VIEW MAP & PHOTO GALLERY | CALL US: 406-466-3100
