Home > FASTENERS > NUTS, BOLTS, SCREWS > ANCHORS > ANCHORS - CONCRETE SCREW -HEX
Sort By:
Page of 1
SCRW CNCRT HEX HD 3/16X1-1/4IN SCRW CNCRT HEX HD 3/16X1-3/4IN SCRW CNCRT HEX HD 3/16X2-3/4IN
The COBRATAP concrete screws are designed with a high and low thread to cut the concrete more effectively and to keep its alignment. It is made of tempered, high-grade steel to ensure the best torque and maximum holding power and is-coated with the corrosion-resistant Cobra-Coat?. The COBRATAP is ACQ compatible and is offered with a flat head or a hexagonal head. The hexagonal head style contains a bonus drill bit in the 10-piece pack, while a drill bit and socket drive are included in all packs of 25 and 100 pieces. The COBRATAP concrete screws are designed with a high and low thread to cut the concrete more effectively and to keep its alignment. It is made of tempered, high-grade steel to ensure the best torque and maximum holding power and is-coated with the corrosion-resistant Cobra-Coat?. The COBRATAP is ACQ compatible and is offered with a flat head or a hexagonal head. The hexagonal head style contains a bonus drill bit in the 10-piece pack, while a drill bit and socket drive are included in all packs of 25 and 100 pieces. The COBRATAP concrete screws are designed with a high and low thread to cut the concrete more effectively and to keep its alignment. It is made of tempered, high-grade steel to ensure the best torque and maximum holding power and is-coated with the corrosion-resistant Cobra-Coat?. The COBRATAP is ACQ compatible and is offered with a flat head or a hexagonal head. The hexagonal head style contains a bonus drill bit in the 10-piece pack, while a drill bit and socket drive are included in all packs of 25 and 100 pieces.
Tapcon 24192 Concrete Anchor SCRW CNCRT HEX HD 3/16X3-1/4IN SCRW CNCRET HEX HD 1/4X1-3/4IN
Secure attachment to concrete, block and brick. One-piece design requires no assembly, does not require anchor torque-down, cracked and seismic approved. Blue ClimaSeal adds corrosion resistance. ANSI drill bit required. The COBRATAP concrete screws are designed with a high and low thread to cut the concrete more effectively and to keep its alignment. It is made of tempered, high-grade steel to ensure the best torque and maximum holding power and is-coated with the corrosion-resistant Cobra-Coat?. The COBRATAP is ACQ compatible and is offered with a flat head or a hexagonal head. The hexagonal head style contains a bonus drill bit in the 10-piece pack, while a drill bit and socket drive are included in all packs of 25 and 100 pieces. The COBRATAP concrete screws are designed with a high and low thread to cut the concrete more effectively and to keep its alignment. It is made of tempered, high-grade steel to ensure the best torque and maximum holding power and is-coated with the corrosion-resistant Cobra-Coat?. The COBRATAP is ACQ compatible and is offered with a flat head or a hexagonal head. The hexagonal head style contains a bonus drill bit in the 10-piece pack, while a drill bit and socket drive are included in all packs of 25 and 100 pieces.
Tapcon 50403 Concrete Anchor SCREW CONCRET HEX 3/16X2-1/4IN Tapcon 24193 Concrete Anchor
Secure attachment to concrete, block and brick. One-piece design requires no assembly, does not require anchor torque-down, cracked and seismic approved. Blue ClimaSeal adds corrosion resistance. ANSI drill bit required. The COBRATAP concrete screws are designed with a high and low thread to cut the concrete more effectively and to keep its alignment. It is made of tempered, high-grade steel to ensure the best torque and maximum holding power and is-coated with the corrosion-resistant Cobra-Coat?. The COBRATAP is ACQ compatible and is offered with a flat head or a hexagonal head. The hexagonal head style contains a bonus drill bit in the 10-piece pack, while a drill bit and socket drive are included in all packs of 25 and 100 pieces. Secure attachment to concrete, block and brick. One-piece design requires no assembly, does not require anchor torque-down, cracked and seismic approved. Blue ClimaSeal adds corrosion resistance. ANSI drill bit required.
SCRW CNCRT HEX HD 3/16X1-1/4IN SCREW CNCRT HEX HD 1/4X2-3/4IN SCRW CNCRT HEX HD 3/16X1-3/4IN
The COBRATAP concrete screws are designed with a high and low thread to cut the concrete more effectively and to keep its alignment. It is made of tempered, high-grade steel to ensure the best torque and maximum holding power and is-coated with the corrosion-resistant Cobra-Coat?. The COBRATAP is ACQ compatible and is offered with a flat head or a hexagonal head. The hexagonal head style contains a bonus drill bit in the 10-piece pack, while a drill bit and socket drive are included in all packs of 25 and 100 pieces. The COBRATAP concrete screws are designed with a high and low thread to cut the concrete more effectively and to keep its alignment. It is made of tempered, high-grade steel to ensure the best torque and maximum holding power and is-coated with the corrosion-resistant Cobra-Coat?. The COBRATAP is ACQ compatible and is offered with a flat head or a hexagonal head. The hexagonal head style contains a bonus drill bit in the 10-piece pack, while a drill bit and socket drive are included in all packs of 25 and 100 pieces. The COBRATAP concrete screws are designed with a high and low thread to cut the concrete more effectively and to keep its alignment. It is made of tempered, high-grade steel to ensure the best torque and maximum holding power and is-coated with the corrosion-resistant Cobra-Coat?. The COBRATAP is ACQ compatible and is offered with a flat head or a hexagonal head. The hexagonal head style contains a bonus drill bit in the 10-piece pack, while a drill bit and socket drive are included in all packs of 25 and 100 pieces.
SCREW CNCRT HEX HD 1/4X1-1/4IN SCRW CNCRET HEX HD 1/4X1-1/4IN SCREW CNCRT HX HD 3/16X2-1/4IN
The COBRATAP concrete screws are designed with a high and low thread to cut the concrete more effectively and to keep its alignment. It is made of tempered, high-grade steel to ensure the best torque and maximum holding power and is-coated with the corrosion-resistant Cobra-Coat?. The COBRATAP is ACQ compatible and is offered with a flat head or a hexagonal head. The hexagonal head style contains a bonus drill bit in the 10-piece pack, while a drill bit and socket drive are included in all packs of 25 and 100 pieces. The COBRATAP concrete screws are designed with a high and low thread to cut the concrete more effectively and to keep its alignment. It is made of tempered, high-grade steel to ensure the best torque and maximum holding power and is-coated with the corrosion-resistant Cobra-Coat?. The COBRATAP is ACQ compatible and is offered with a flat head or a hexagonal head. The hexagonal head style contains a bonus drill bit in the 10-piece pack, while a drill bit and socket drive are included in all packs of 25 and 100 pieces. The COBRATAP concrete screws are designed with a high and low thread to cut the concrete more effectively and to keep its alignment. It is made of tempered, high-grade steel to ensure the best torque and maximum holding power and is-coated with the corrosion-resistant Cobra-Coat?. The COBRATAP is ACQ compatible and is offered with a flat head or a hexagonal head. The hexagonal head style contains a bonus drill bit in the 10-piece pack, while a drill bit and socket drive are included in all packs of 25 and 100 pieces.
SCREW CONCRETE HX 3/16X2-3/4IN SCRW CNCRET HEX HD 1/4X1-3/4IN Tapcon 50426 Concrete Anchor
The COBRATAP concrete screws are designed with a high and low thread to cut the concrete more effectively and to keep its alignment. It is made of tempered, high-grade steel to ensure the best torque and maximum holding power and is-coated with the corrosion-resistant Cobra-Coat?. The COBRATAP is ACQ compatible and is offered with a flat head or a hexagonal head. The hexagonal head style contains a bonus drill bit in the 10-piece pack, while a drill bit and socket drive are included in all packs of 25 and 100 pieces. The COBRATAP concrete screws are designed with a high and low thread to cut the concrete more effectively and to keep its alignment. It is made of tempered, high-grade steel to ensure the best torque and maximum holding power and is-coated with the corrosion-resistant Cobra-Coat?. The COBRATAP is ACQ compatible and is offered with a flat head or a hexagonal head. The hexagonal head style contains a bonus drill bit in the 10-piece pack, while a drill bit and socket drive are included in all packs of 25 and 100 pieces. Secure attachment to concrete, block and brick. One-piece design requires no assembly, does not require anchor torque-down, cracked and seismic approved. Blue ClimaSeal adds corrosion resistance. ANSI drill bit required.
SCRW CNCRT HEX HD 3/16X3-1/4IN SCREW CNCRT BLU 3/16 X 1-1/4IN SCRW CNCRET HEX HD 1/4X2-1/4IN
The COBRATAP concrete screws are designed with a high and low thread to cut the concrete more effectively and to keep its alignment. It is made of tempered, high-grade steel to ensure the best torque and maximum holding power and is-coated with the corrosion-resistant Cobra-Coat?. The COBRATAP is ACQ compatible and is offered with a flat head or a hexagonal head. The hexagonal head style contains a bonus drill bit in the 10-piece pack, while a drill bit and socket drive are included in all packs of 25 and 100 pieces. The UltraCon+ fastening system is a complete family of screw anchors for light to medium-duty applications in concrete, masonry block, brick and wood base materials. The UltraCon+ is fast and easy to install and provides a neat, finished appearance. The UltraCon+ screw anchor is engineered with matched tolerance drill bits and installation tools designed to meet the needs of the user and also provide optimum performance. The UltraCon+ features a gimlet point for self drilling into wood base materials without pre-drilling. The UltraCon+ screw anchor is available in carbon steel with a Stalgard coating in several colors. Head styles include a slotted hex washer head, Philips flat head, Philips trimfit flat head and hex flange head. The COBRATAP concrete screws are designed with a high and low thread to cut the concrete more effectively and to keep its alignment. It is made of tempered, high-grade steel to ensure the best torque and maximum holding power and is-coated with the corrosion-resistant Cobra-Coat?. The COBRATAP is ACQ compatible and is offered with a flat head or a hexagonal head. The hexagonal head style contains a bonus drill bit in the 10-piece pack, while a drill bit and socket drive are included in all packs of 25 and 100 pieces.
SCREW CONCRETE HH 1/4X3-1/4IN SCREW CNCRT HEX HD 1/4X2-3/4IN SCREW CNCRT BLUE 1/4 X 1-1/4IN
The COBRATAP concrete screws are designed with a high and low thread to cut the concrete more effectively and to keep its alignment. It is made of tempered, high-grade steel to ensure the best torque and maximum holding power and is-coated with the corrosion-resistant Cobra-Coat???. The COBRATAP is ACQ compatible and is offered with a flat head or a hexagonal head. The hexagonal head style contains a bonus drill bit in the 10-piece pack, while a drill bit and socket drive are included in all packs of 25 and 100 pieces. The COBRATAP concrete screws are designed with a high and low thread to cut the concrete more effectively and to keep its alignment. It is made of tempered, high-grade steel to ensure the best torque and maximum holding power and is-coated with the corrosion-resistant Cobra-Coat?. The COBRATAP is ACQ compatible and is offered with a flat head or a hexagonal head. The hexagonal head style contains a bonus drill bit in the 10-piece pack, while a drill bit and socket drive are included in all packs of 25 and 100 pieces. The UltraCon+ fastening system is a complete family of screw anchors for light to medium-duty applications in concrete, masonry block, brick and wood base materials. The UltraCon+ is fast and easy to install and provides a neat, finished appearance. The UltraCon+ screw anchor is engineered with matched tolerance drill bits and installation tools designed to meet the needs of the user and also provide optimum performance. The UltraCon+ features a gimlet point for self drilling into wood base materials without pre-drilling. The UltraCon+ screw anchor is available in carbon steel with a Stalgard coating in several colors. Head styles include a slotted hex washer head, Philips flat head, Philips trimfit flat head and hex flange head.
SCREW CNCRT BLU 3/16 X 2-1/4IN SCREW CNCRT HEX HD 1/4X3-1/4IN SCREW CNCRT BLUE 1/4 X 2-1/4IN
The UltraCon+ fastening system is a complete family of screw anchors for light to medium-duty applications in concrete, masonry block, brick and wood base materials. The UltraCon+ is fast and easy to install and provides a neat, finished appearance. The UltraCon+ screw anchor is engineered with matched tolerance drill bits and installation tools designed to meet the needs of the user and also provide optimum performance. The UltraCon+ features a gimlet point for self drilling into wood base materials without pre-drilling. The UltraCon+ screw anchor is available in carbon steel with a Stalgard coating in several colors. Head styles include a slotted hex washer head, Philips flat head, Philips trimfit flat head and hex flange head. The COBRATAP concrete screws are designed with a high and low thread to cut the concrete more effectively and to keep its alignment. It is made of tempered, high-grade steel to ensure the best torque and maximum holding power and is-coated with the corrosion-resistant Cobra-Coat?. The COBRATAP is ACQ compatible and is offered with a flat head or a hexagonal head. The hexagonal head style contains a bonus drill bit in the 10-piece pack, while a drill bit and socket drive are included in all packs of 25 and 100 pieces. The UltraCon+ fastening system is a complete family of screw anchors for light to medium-duty applications in concrete, masonry block, brick and wood base materials. The UltraCon+ is fast and easy to install and provides a neat, finished appearance. The UltraCon+ screw anchor is engineered with matched tolerance drill bits and installation tools designed to meet the needs of the user and also provide optimum performance. The UltraCon+ features a gimlet point for self drilling into wood base materials without pre-drilling. The UltraCon+ screw anchor is available in carbon steel with a Stalgard coating in several colors. Head styles include a slotted hex washer head, Philips flat head, Philips trimfit flat head and hex flange head.
Tapcon 24300 Concrete Screw ANCHOR CNCRT HEX HEAD 1/4X4IN SCREW CONCRETE HEX HD 1/4X4IN
Fast installation. Replaces small diameter expansion anchors, plugs and screws in light to medium duty applications. No need to pre-spot hole. No inserts are required. Reversible and removable. Can be installed close to an edge. Thread design results in increased pullout values and lower installation torque. 'Climaseal' coating provides extra corrosion resistance. Applications - electrical junction boxes, conduit clips, HVAC strapping, 2 x 4 lumber, wood headers, furring strips, hurricane shutters, window frames, jambs and sills, door frames to masonry, plywood backer boards to masonry, exterior insulation to masonry. Secure attachment to concrete, block and brick. One-piece design requires no assembly, does not require anchor torque-down, cracked and seismic approved. Blue ClimaSeal adds corrosion resistance. ANSI drill bit required. The COBRATAP concrete screws are designed with a high and low thread to cut the concrete more effectively and to keep its alignment. It is made of tempered, high-grade steel to ensure the best torque and maximum holding power and is-coated with the corrosion-resistant Cobra-Coat?. The COBRATAP is ACQ compatible and is offered with a flat head or a hexagonal head. The hexagonal head style contains a bonus drill bit in the 10-piece pack, while a drill bit and socket drive are included in all packs of 25 and 100 pieces.
SCREW CNCRT BLU 3/16 X 3-1/4IN SCREW CNCRT BLUE 1/4 X 2-3/4IN Tapcon 24305 Concrete Screw
The UltraCon+ fastening system is a complete family of screw anchors for light to medium-duty applications in concrete, masonry block, brick and wood base materials. The UltraCon+ is fast and easy to install and provides a neat, finished appearance. The UltraCon+ screw anchor is engineered with matched tolerance drill bits and installation tools designed to meet the needs of the user and also provide optimum performance. The UltraCon+ features a gimlet point for self drilling into wood base materials without pre-drilling. The UltraCon+ screw anchor is available in carbon steel with a Stalgard coating in several colors. Head styles include a slotted hex washer head, Philips flat head, Philips trimfit flat head and hex flange head. The UltraCon+ fastening system is a complete family of screw anchors for light to medium-duty applications in concrete, masonry block, brick and wood base materials. The UltraCon+ is fast and easy to install and provides a neat, finished appearance. The UltraCon+ screw anchor is engineered with matched tolerance drill bits and installation tools designed to meet the needs of the user and also provide optimum performance. The UltraCon+ features a gimlet point for self drilling into wood base materials without pre-drilling. The UltraCon+ screw anchor is available in carbon steel with a Stalgard coating in several colors. Head styles include a slotted hex washer head, Philips flat head, Philips trimfit flat head and hex flange head. Fast installation. Replaces small diameter expansion anchors, plugs and screws in light to medium duty applications. No need to pre-spot hole. No inserts are required. Reversible and removable. Can be installed close to an edge. Thread design results in increased pullout values and lower installation torque. 'Climaseal' coating provides extra corrosion resistance. Applications - electrical junction boxes, conduit clips, HVAC strapping, 2 x 4 lumber, wood headers, furring strips, hurricane shutters, window frames, jambs and sills, door frames to masonry, plywood backer boards to masonry, exterior insulation to masonry.
Tapcon 24292 Concrete Anchor Tapcon 24293 Concrete Anchor SCREW CONCRET BLUE 1/4X1-1/4IN
Secure attachment to concrete, block and brick. One-piece design requires no assembly, does not require anchor torque-down, cracked and seismic approved. Blue ClimaSeal adds corrosion resistance. ANSI drill bit required. Secure attachment to concrete, block and brick. One-piece design requires no assembly, does not require anchor torque-down, cracked and seismic approved. Blue ClimaSeal adds corrosion resistance. ANSI drill bit required. The COBRATAP concrete screws are designed with a high and low thread to cut the concrete more effectively and to keep its alignment. It is made of tempered, high-grade steel to ensure the best torque and maximum holding power and is-coated with the corrosion-resistant Cobra-Coat?. The COBRATAP is ACQ compatible and is offered with a flat head or a hexagonal head. The hexagonal head style contains a bonus drill bit in the 10-piece pack, while a drill bit and socket drive are included in all packs of 25 and 100 pieces.
Tapcon 24310 Concrete Screw Tapcon 11413 Concrete Anchor SCREW CONCRET BLUE 1/4X1-3/4IN
Fast installation. Replaces small diameter expansion anchors, plugs and screws in light to medium duty applications. No need to pre-spot hole. No inserts are required. Reversible and removable. Can be installed close to an edge. Thread design results in increased pullout values and lower installation torque. 'Climaseal' coating provides extra corrosion resistance. Applications - electrical junction boxes, conduit clips, HVAC strapping, 2 x 4 lumber, wood headers, furring strips, hurricane shutters, window frames, jambs and sills, door frames to masonry, plywood backer boards to masonry, exterior insulation to masonry. Secure attachment to concrete, block and brick. One-piece design requires no assembly, does not require anchor torque-down, cracked and seismic approved. Blue ClimaSeal adds corrosion resistance. ANSI drill bit required. The COBRATAP concrete screws are designed with a high and low thread to cut the concrete more effectively and to keep its alignment. It is made of tempered, high-grade steel to ensure the best torque and maximum holding power and is-coated with the corrosion-resistant Cobra-Coat?. The COBRATAP is ACQ compatible and is offered with a flat head or a hexagonal head. The hexagonal head style contains a bonus drill bit in the 10-piece pack, while a drill bit and socket drive are included in all packs of 25 and 100 pieces.
Tapcon 24315 Concrete Screw SCREW CONCRETE BLUE 1/4 X 4IN Tapcon 24320 Concrete Screw
Fast installation. Replaces small diameter expansion anchors, plugs and screws in light to medium duty applications. No need to pre-spot hole. No inserts are required. Reversible and removable. Can be installed close to an edge. Thread design results in increased pullout values and lower installation torque. 'Climaseal' coating provides extra corrosion resistance. Applications - electrical junction boxes, conduit clips, HVAC strapping, 2 x 4 lumber, wood headers, furring strips, hurricane shutters, window frames, jambs and sills, door frames to masonry, plywood backer boards to masonry, exterior insulation to masonry. The UltraCon+ fastening system is a complete family of screw anchors for light to medium-duty applications in concrete, masonry block, brick and wood base materials. The UltraCon+ is fast and easy to install and provides a neat, finished appearance. The UltraCon+ screw anchor is engineered with matched tolerance drill bits and installation tools designed to meet the needs of the user and also provide optimum performance. The UltraCon+ features a gimlet point for self drilling into wood base materials without pre-drilling. The UltraCon+ screw anchor is available in carbon steel with a Stalgard coating in several colors. Head styles include a slotted hex washer head, Philips flat head, Philips trimfit flat head and hex flange head. Fast installation. Replaces small diameter expansion anchors, plugs and screws in light to medium duty applications. No need to pre-spot hole. No inserts are required. Reversible and removable. Can be installed close to an edge. Thread design results in increased pullout values and lower installation torque. 'Climaseal' coating provides extra corrosion resistance. Applications - electrical junction boxes, conduit clips, HVAC strapping, 2 x 4 lumber, wood headers, furring strips, hurricane shutters, window frames, jambs and sills, door frames to masonry, plywood backer boards to masonry, exterior insulation to masonry.
Tapcon 11414 Concrete Anchor SCREW CONCRET BLUE 1/4X2-3/4IN Tapcon 24325 Concrete Screw
Secure attachment to concrete, block and brick. One-piece design requires no assembly, does not require anchor torque-down, cracked and seismic approved. Blue ClimaSeal adds corrosion resistance. ANSI drill bit required. The COBRATAP concrete screws are designed with a high and low thread to cut the concrete more effectively and to keep its alignment. It is made of tempered, high-grade steel to ensure the best torque and maximum holding power and is-coated with the corrosion-resistant Cobra-Coat?. The COBRATAP is ACQ compatible and is offered with a flat head or a hexagonal head. The hexagonal head style contains a bonus drill bit in the 10-piece pack, while a drill bit and socket drive are included in all packs of 25 and 100 pieces. Fast installation. Replaces small diameter expansion anchors, plugs and screws in light to medium duty applications. No need to pre-spot hole. No inserts are required. Reversible and removable. Can be installed close to an edge. Thread design results in increased pullout values and lower installation torque. 'Climaseal' coating provides extra corrosion resistance. Applications - electrical junction boxes, conduit clips, HVAC strapping, 2 x 4 lumber, wood headers, furring strips, hurricane shutters, window frames, jambs and sills, door frames to masonry, plywood backer boards to masonry, exterior insulation to masonry.
SCRW CNCRT HEX HD 3/16X2-3/4IN SCRW CNCRT HEX HD 3/16X3-1/4IN Tapcon 24330 Concrete Screw
The CobraTap? concrete screws are designed with a high and low thread to cut the concrete more effectively and to keep its alignment. It is made of tempered, high-grade steel to ensure the best torque and maximum holding power and is coated with the corrosion-resistant Cobra Coat?. The CobraTap? is ACQ compatible and is offered with a flat head or a hexagonal head. The COBRATAP concrete screws are designed with a high and low thread to cut the concrete more effectively and to keep its alignment. It is made of tempered, high-grade steel to ensure the best torque and maximum holding power and is-coated with the corrosion-resistant Cobra-Coat?. The COBRATAP is ACQ compatible and is offered with a flat head or a hexagonal head. The hexagonal head style contains a bonus drill bit in the 10-piece pack, while a drill bit and socket drive are included in all packs of 25 and 100 pieces. Fast installation. Replaces small diameter expansion anchors, plugs and screws in light to medium duty applications. No need to pre-spot hole. No inserts are required. Reversible and removable. Can be installed close to an edge. Thread design results in increased pullout values and lower installation torque. 'Climaseal' coating provides extra corrosion resistance. Applications - electrical junction boxes, conduit clips, HVAC strapping, 2 x 4 lumber, wood headers, furring strips, hurricane shutters, window frames, jambs and sills, door frames to masonry, plywood backer boards to masonry, exterior insulation to masonry.
Tapcon 24340 Concrete Screw SCRW CNCRT HEX HD 1/4X1-3/4IN ANCHOR CNCRT HWH 1/4 X 3-1/4IN
Fast installation. Replaces small diameter expansion anchors, plugs and screws in light to medium duty applications. No need to pre-spot hole. No inserts are required. Reversible and removable. Can be installed close to an edge. Thread design results in increased pullout values and lower installation torque. 'Climaseal' coating provides extra corrosion resistance. Applications - electrical junction boxes, conduit clips, HVAC strapping, 2 x 4 lumber, wood headers, furring strips, hurricane shutters, window frames, jambs and sills, door frames to masonry, plywood backer boards to masonry, exterior insulation to masonry. The CobraTap? concrete screws are designed with a high and low thread to cut the concrete more effectively and to keep its alignment. It is made of tempered, high-grade steel to ensure the best torque and maximum holding power and is coated with the corrosion-resistant Cobra Coat?. The CobraTap? is ACQ compatible and is offered with a flat head or a hexagonal head. Secure attachment to concrete, block and brick. One-piece design requires no assembly, does not require anchor torque-down, cracked and seismic approved. Blue ClimaSeal adds corrosion resistance. ANSI drill bit required.
ANCHOR SCREW TAPCON 1/2X4IN SCREW CONCRET BLUE 1/4X2-1/4IN SCREW SLOT HEX BLU 1/4X2-3/4IN
Ideal for projects that require heavy-duty holding power, Tapcon+ concrete screw anchors are the stronger, faster and easier masonry anchoring solution. This heavy-duty screw anchor features a high-strength body that's built to resist both high wind and seismic tension and is ICC-ES approved for use in both cracked and un-cracked concrete. Superior to wedge and sleeve anchors, Tapcon+ installs in less than half the time while delivering 20% more holding power and the flexibility to install closer to the edge of the concrete and closer to one another. The COBRATAP concrete screws are designed with a high and low thread to cut the concrete more effectively and to keep its alignment. It is made of tempered, high-grade steel to ensure the best torque and maximum holding power and is-coated with the corrosion-resistant Cobra-Coat?. The COBRATAP is ACQ compatible and is offered with a flat head or a hexagonal head. The hexagonal head style contains a bonus drill bit in the 10-piece pack, while a drill bit and socket drive are included in all packs of 25 and 100 pieces. Midwest Fastener Masonry Screw, 1/4 in Dia, 2-3/4 in L, Drill Size: 3/16 in, Head Type: Hex, Steel, Blue Ruspert
ANCHOR SCREW HEX WSHR 3/8X3IN SCRW CNCRT HEX HD 1/4X2-1/4IN SCREW CNCRT BLU HX HD 3/16X4IN
The Screw-Bolt?+ anchor is a one-piece, heavy-duty screw anchor with a finished hex head. It is simple to install, easy to identify and fully removable. The patented thread design, designed for use with standard ANSI drill bits, reduces installation torque and enhances productivity. The steel threads along the anchor body tap into the hole during installation to provide keyed engagement and allow for reduced edge and spacing distances. The Screw-Bolt?+ finish is available in bright zinc-plated and mechanically galvanized. Suitable base materials include normal weight concrete, sand lightweight concrete, concrete over steel deck, concrete masonry and solid clay brick. The CobraTap? concrete screws are designed with a high and low thread to cut the concrete more effectively and to keep its alignment. It is made of tempered, high-grade steel to ensure the best torque and maximum holding power and is coated with the corrosion-resistant Cobra Coat?. The CobraTap? is ACQ compatible and is offered with a flat head or a hexagonal head. The COBRATAP concrete screws are designed with a high and low thread to cut the concrete more effectively and to keep its alignment. It is made of tempered, high-grade steel to ensure the best torque and maximum holding power and is-coated with the corrosion-resistant Cobra-Coat???. The COBRATAP is ACQ compatible and is offered with a flat head or a hexagonal head. The hexagonal head style contains a bonus drill bit in the 10-piece pack, while a drill bit and socket drive are included in all packs of 25 and 100 pieces.
SCRW CNCRT HEX HD 1/4X3-1/4IN SCRW CNCRT HEX HD 1/4X2-3/4IN ANCHOR SCREW HEX WSHR 3/8X4IN
The CobraTap? concrete screws are designed with a high and low thread to cut the concrete more effectively and to keep its alignment. It is made of tempered, high-grade steel to ensure the best torque and maximum holding power and is coated with the corrosion-resistant Cobra Coat?. The CobraTap? is ACQ compatible and is offered with a flat head or a hexagonal head. The CobraTap? concrete screws are designed with a high and low thread to cut the concrete more effectively and to keep its alignment. It is made of tempered, high-grade steel to ensure the best torque and maximum holding power and is coated with the corrosion-resistant Cobra Coat?. The CobraTap? is ACQ compatible and is offered with a flat head or a hexagonal head. The Screw-Bolt?+ anchor is a one-piece, heavy-duty screw anchor with a finished hex head. It is simple to install, easy to identify and fully removable. The patented thread design, designed for use with standard ANSI drill bits, reduces installation torque and enhances productivity. The steel threads along the anchor body tap into the hole during installation to provide keyed engagement and allow for reduced edge and spacing distances. The Screw-Bolt?+ finish is available in bright zinc-plated and mechanically galvanized. Suitable base materials include normal weight concrete, sand lightweight concrete, concrete over steel deck, concrete masonry and solid clay brick.
ANCHOR CNCRT HWH 1/4 X 1-1/4IN ANCHOR CNCRT HWH 1/4 X 2-3/4IN SCREW SLOT HEX BLU 1/4X3-1/4IN
Secure attachment to concrete, block and brick. One-piece design requires no assembly, does not require anchor torque-down, cracked and seismic approved. Blue ClimaSeal adds corrosion resistance. ANSI drill bit required. Secure attachment to concrete, block and brick. One-piece design requires no assembly, does not require anchor torque-down, cracked and seismic approved. Blue ClimaSeal adds corrosion resistance. ANSI drill bit required. Midwest Fastener Masonry Screw, 3-1/4 in L, Drill Size: 3/16 in, Screw Size: 1/4 in, Head Type: Hex, Steel, Blue Ruspert
ANCHOR CNCRT HWH 1/4 X 1-3/4IN ANCHOR SCREW HEX WSHR 1/2X6IN SCREW CONCRETE BLUE 1/4X4IN
Secure attachment to concrete, block and brick. One-piece design requires no assembly, does not require anchor torque-down, cracked and seismic approved. Blue ClimaSeal adds corrosion resistance. ANSI drill bit required. The Screw-Bolt?+ anchor is a one-piece, heavy-duty screw anchor with a finished hex head. It is simple to install, easy to identify and fully removable. The patented thread design, designed for use with standard ANSI drill bits, reduces installation torque and enhances productivity. The steel threads along the anchor body tap into the hole during installation to provide keyed engagement and allow for reduced edge and spacing distances. The Screw-Bolt?+ finish is available in bright zinc-plated and mechanically galvanized. Suitable base materials include normal weight concrete, sand lightweight concrete, concrete over steel deck, concrete masonry and solid clay brick. The COBRATAP concrete screws are designed with a high and low thread to cut the concrete more effectively and to keep its alignment. It is made of tempered, high-grade steel to ensure the best torque and maximum holding power and is-coated with the corrosion-resistant Cobra-Coat?. The COBRATAP is ACQ compatible and is offered with a flat head or a hexagonal head. The hexagonal head style contains a bonus drill bit in the 10-piece pack, while a drill bit and socket drive are included in all packs of 25 and 100 pieces.
SCRW CNCRT HEX HD 1/4X4IN BLU ANCHOR SCREW HEX WSHR 1/2X3IN ANCHOR SCREW HEX WSHR 5/8X4IN
The CobraTap? concrete screws are designed with a high and low thread to cut the concrete more effectively and to keep its alignment. It is made of tempered, high-grade steel to ensure the best torque and maximum holding power and is coated with the corrosion-resistant Cobra Coat?. The CobraTap? is ACQ compatible and is offered with a flat head or a hexagonal head. The Screw-Bolt?+ anchor is a one-piece, heavy-duty screw anchor with a finished hex head. It is simple to install, easy to identify and fully removable. The patented thread design, designed for use with standard ANSI drill bits, reduces installation torque and enhances productivity. The steel threads along the anchor body tap into the hole during installation to provide keyed engagement and allow for reduced edge and spacing distances. The Screw-Bolt?+ finish is available in bright zinc-plated and mechanically galvanized. Suitable base materials include normal weight concrete, sand lightweight concrete, concrete over steel deck, concrete masonry and solid clay brick. The Screw-Bolt?+ anchor is a one-piece, heavy-duty screw anchor with a finished hex head. It is simple to install, easy to identify and fully removable. The patented thread design, designed for use with standard ANSI drill bits, reduces installation torque and enhances productivity. The steel threads along the anchor body tap into the hole during installation to provide keyed engagement and allow for reduced edge and spacing distances. The Screw-Bolt?+ finish is available in bright zinc-plated and mechanically galvanized. Suitable base materials include normal weight concrete, sand lightweight concrete, concrete over steel deck, concrete masonry and solid clay brick.
ANCHOR SCREW HEX WSHR 1/2X4IN ANCHOR SCREW HEX WSHR 5/8X6IN ANCHOR SCREW HEX WSHR 5/8X8IN
The Screw-Bolt?+ anchor is a one-piece, heavy-duty screw anchor with a finished hex head. It is simple to install, easy to identify and fully removable. The patented thread design, designed for use with standard ANSI drill bits, reduces installation torque and enhances productivity. The steel threads along the anchor body tap into the hole during installation to provide keyed engagement and allow for reduced edge and spacing distances. The Screw-Bolt?+ finish is available in bright zinc-plated and mechanically galvanized. Suitable base materials include normal weight concrete, sand lightweight concrete, concrete over steel deck, concrete masonry and solid clay brick. The Screw-Bolt?+ anchor is a one-piece, heavy-duty screw anchor with a finished hex head. It is simple to install, easy to identify and fully removable. The patented thread design, designed for use with standard ANSI drill bits, reduces installation torque and enhances productivity. The steel threads along the anchor body tap into the hole during installation to provide keyed engagement and allow for reduced edge and spacing distances. The Screw-Bolt?+ finish is available in bright zinc-plated and mechanically galvanized. Suitable base materials include normal weight concrete, sand lightweight concrete, concrete over steel deck, concrete masonry and solid clay brick. The Screw-Bolt?+ anchor is a one-piece, heavy-duty screw anchor with a finished hex head. It is simple to install, easy to identify and fully removable. The patented thread design, designed for use with standard ANSI drill bits, reduces installation torque and enhances productivity. The steel threads along the anchor body tap into the hole during installation to provide keyed engagement and allow for reduced edge and spacing distances. The Screw-Bolt?+ finish is available in bright zinc-plated and mechanically galvanized. Suitable base materials include normal weight concrete, sand lightweight concrete, concrete over steel deck, concrete masonry and solid clay brick.